• Journal of Preventive Medicine and Public Health
• /
• 제53권5호
• /
• pp.362-370
• /
• 2020

Objectives: Despite greater access to training positions and the presence of more women in emergency medicine, it has remained a men-dominated field. This study aims to identify the key issues causing the gender gap in Korea and establish measures to overcome them. Methods: Using the annual statistical reports of the National Emergency Medical Center and data published on the Korean Society of Emergency Medicine website, cases that listed the current status and positions of members in its organization and its committees were analyzed. Secondary analysis was conducted using data from the 2015 Korean Society of Emergency Survey that included physicians' demographics, academic ranking, years of experience, clinical work hours, training and board certification, core faculty status, position, and salaries. Results: As of September 2019, women account for only 12.7% of the total number of emergency physicians (EP) in Korea; of 119 chair/vice-chair academic positions, women represented only 9.2%. Women EP were more often assistant professors and fellowship-trained, with fewer in core faculty. However, they worked the same numbers of clinical hours as their men counterparts. The median annual salary of women EP was less than that of men EP after adjusting for academic hospital rank, clinical hours, and core faculty status. Conclusions: A gender gap still exists among Korean EP, and women earn less than men regardless of their rank, clinical hours, or training. Future studies should evaluate more data and develop system-wide practices to eliminate gender disparities.

• 한국인쇄학회지
• /
• 제20권2호
• /
• pp.31-43
• /
• 2002

Screen printing is a stencil process whereby ink is transferred to the substrate through a stencil supported by a fine fabric mesh. Therefore screen had a tendency to distort and swell, as ink was deposited between the fibers, and were difficult to clean. The tow importance of stencil parameters that affect print quality are stencil thread diameter and the fabric thickness because of their influence on both ink deposit and print definition. Since screen printing inks can be formulated to adhere to almost any surface, and the printing process itself can be handled almost any substrate in a wide variety of shape, screen printing is a very versatile process. The small size pronting is reproduced image used screen printing because the surface of substrates is not suited at screen printing method. In screen printing, the need of high definition printing is gradually increasing according to developing special inks. A conventional haftone, so called AM screening, is simple and easy to implement, but the haftone dot patterns by using this method are not free for the moire fringe. This paper is used densitometry and image analysis to investigate relation with printing according to screen mesh, opening size and resolution of copy in image reproduction used FM screen. We had the good result of dot gain and tone reproduction on the screen printing of high definition using FM screen.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.130-143
• /
• 1995

The purpose of this study was to analyze the magnitude and distribution of stress using photoelastic model with the rigid connection using T-block attachment and non-rigid connection using key & keyway attachment. The vertical load of 16 Kg was applied on the central fossa of the tooth, the pontic and the implant, and the pattern and distribution under each condition was analyzed. The following results were obtained : 1. In case of vertical load on the central fossa of the implant, the stress was concentrated at the apex of the implant involving the mesial alveolar bone in both fixed partial denture with the rigid connection and that with the nonrigid connection and the stress concentration at the mesial cervical area of the implant was a little more in the nonrigid connection than in the rigid connection. 2. In case of vertical load on the central fossa of the pontic, the stress was concentrated at the apex of 2nd bicuspid in both 3 unit fixed partial denture with nonrigid connection and that with the rigid connection. The stress was more concentrated at the mesial alveolar bone of the implant, but the stress distribution at the natural teeth more favorable at the rigid connection than at the non-rigid connection in case of 4 unit fixed partial denture. 3. In case of vertical load of the central fossa of the 2nd bicuspid, much stress with 3 fringe order was observed at the apex of the 2nd bicuspid in the 3 unit fixed partial denture, but relatively even stress distribution was observed at the apex of the implant, the 1st and 2nd bicuspid, and the adjacent cuspid in the 4 unit fixed partial denture.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.59-66
• /
• 2001

The tremendous growth of population and physical development in the largest urban agglomeration in Indonesia -the Jakarta Metropolitan Region, also known as Jabotabek (Jakarta, Bogor, Tanggerang, Bekasi)- has created many environmental problems, such as land use conversion, increasing urban temperature, water and air pollution, intrusion of seawater, and flooding. These problems have become more serious as the urban green space (trees, shrubs, and groundcovers) has decreased rapidly with the urbanization process. Urban green space directly benefits the urban environment through ameliorating air pollution, controlling temperature, contributing to the balance of the hydrological system, and providing space for recreation and relaxation. Because there is little hard data to support the claim of decreasing greenery in Jabotabek, it is necessary to measure the amount of urban green space. The paper describes the spatial analysis of urban green space within Jabotabek through the use of a geographical information system (GIS). We used GIS and remote sensing to determine land cover change and predicted greenery percentage. Interpretation of Landsat data for 1972, 1983, 1990, and 1997 showed that Jabotabek has experiences rapid development and associated depletion of green open space. The proportion of green open space fell by 23% from 1972 to 1997. We found a low percentage of urban green space in the center of Jakarta but a high percentage in fringe area. The amount of greenery is predicted by the Ratio Vegetation Index (RVI) model: predicted greenery (%) = [146.04] RVI - 134.96. We consider that our result will be useful for landscape planning to improve the environment of Jabotabek.

• 한국환경복원기술학회지
• /
• 제12권3호
• /
• pp.142-163
• /
• 2009

Taebaek city is located in the mountainous plateau area therefore the major industry was coal industry. According to dramatically declining of the major industry, Taebaek city is need to alternative industry which associated with considering the geographical characteristics of natural tourism resources for increasing the local economy. On the basis of these reasons, this study can be suggested ecological planning and mitigation of deterioration technique about the these study site. That is the reserved area for mountainous experience theme park. As the results of environmental ecology assessment are following as; The natural ecosystem areas, multi-layer structure forest such as forest of Pinus densiflora, forest of Quercus mongolica and deciduous forest have a high value of nature, diversity and potential. In addition, wild bird habitats were important area as a inhabitation, breeding, feeding and hiding. Therefore, on these areas should be preserved. Also, it needs to conserve on there such as more than three types of wild bird inhabitate areas, the fringe of high biological diversity, the wetland that have got good vegetation condition and the function of amphibia, reptiles crossing. In addition, inhabitation, the waterway of wetland form that have got wide waterside width needs to conserve. In conclusion, on the basis of analysis results such as conditions of plan, environment, ecological assessments, survey informations are able to suggest the connectivity of the axis of forest and management plan. Moreover, in the part of forest restoration plan, we suggest the plan of transplant for a compensation of damaged forest by land use.

• 농촌지도와개발
• /
• 제26권3호
• /
• pp.165-179
• /
• 2019

This study aims to examine the difference in the rurality of rural villages near a metropolitan city. It investigated the general status and economic activities of the two villages near Ulsan Metropolitan City to find out what the differences are and to diagnose the reasons for such differences and their impact on future changes in the villages. Through this survey analysis, it found that the two villages have been continuously experiencing a decrease in population over the last 10 years, despite being near large cities. In addition, it also identified the characteristics of the agricultural and livestock industries taking center stage in economic activities. In other words, although the cases are rural villages near a big city, it was shown that the village near a provincial city is basically based on agricultural characteristics. Regarding future prospects, on the one hand, in the case of Dagae-ri, the villagers expect that the current livestock industry-oriented activities may continue to develop. On the other hand, in the case of Shinhwa-ri, the residents think that the rural characteristics may be rapidly lost and urbanized. Based on these findings, this study suggests that rural policies for villages near large cities also need to be applied in a discriminatory manner, taking into account the basis on which economic activities in the villages are developed.

• 방송공학회논문지
• /
• 제24권3호
• /
• pp.452-462
• /
• 2019

차세대 영상시스템의 하나인 디지털홀로그램은 다양한 형태로 생성되고 재생될 수 있고, 디지털홀로그램은 재생을 위한 시스템의 특성에 맞게 생성된다. 다양한 조건으로 생성된 디지털홀로그램이 다양한 재생환경에서 어떠한 특성을 나타내는지에 대한 척도로써 회절효율의 측정을 사용할 수 있다. 본 논문에서는 다양한 조건으로 생성된 컴퓨터생성홀로그램(Computer-generated Hologram, CGH)에 대한 회절효율을 측정하였다. 이를 통해 홀로그램 재생 시 고려해야되는 생성 조건에 대해 논의한다. 위상 방식의 복소 홀로그램을 대상으로 프레넬 조건 하에서 생성된 프린지의 1차 회절 패턴의 강도를 측정함으로써 각 조건들을 비교한다. 본 논문을 통해서 객체 포인트, 복원 거리, 레이저 및 SLM의 종류에 따른 회절효율의 특성에 대한 경향성을 보였다.

• Steel and Composite Structures
• /
• 제30권2호
• /
• pp.81-96
• /
• 2019

The behavior of a new Three-Tube Buckling-Restrained Brace (TTBRB) with circumference pre-stress (${\sigma}_{{\theta},pre}$) in core tube are investigated through a verified finite element model. The TTBRB is composed of one core tube and two restraining tubes. The core tube is in the middle to provide the axial stiffness, to carry the axial load and to dissipate the earthquake energy. The two restraining tubes are at inside and outside of the core tube, respectively, to restrain the global and local buckling of the core tube. Based on the yield criteria of fringe fiber, a design method for restraining tubes is proposed. The applicability of the proposed design equations are verified by TTBRBs with different radius-thickness ratios, with different gap widths between core tube and restraining tubs, and with different levels of ${\sigma}_{{\theta},pre}$. The outer and inner tubes will restrain the deformation of the core tube in radius direction, which causes circumference stress (${\sigma}_{\theta}$) in the core tube. Together with the ${\sigma}_{{\theta},pre}$ in the core tube that is applied through interference fit of the three tubes, the yield strength of the core tube in the axial direction is improved from 160 MPa to 235 MPa. Effects of gap width between the core tube and restraining tubes, and ${\sigma}_{{\theta},pre}$ on hysteretic behavior of TTBRBs are presented. Analysis results showed that the gap width and the ${\sigma}_{{\theta},pre}$ can significantly affect the hysteretic behavior of a TTBRB.

• 방송공학회논문지
• /
• 제12권1호
• /
• pp.11-27
• /
• 2007

휴대 이동 방송을 위한 T-DMB(Terrestrial - Digital Multimedia Broadcasting)가 2005년 12월 수도권에서 본방송을 시작하였다. 현재 다양한 양방향 데이터 서비스의 개발과 T-DMB 방송망 확장이 진행 중이며, 조만간 지역 T-DMB 사업자도 선정될 예정이다. T-DMB의 RF 커버리지를 최적화하기 위해서는 서비스 영역을 산출하고 음영 지역을 해소하는 것이 중요하지만, 이를 지원하는 전문적인 시스템이 없어 많은 예산, 인력, 시간이 소요되었다. 송신기의 시간 및 주파수 동기, 송신소 사이의 거리, 송신 전력의 크기를 조절해야 하는 T-DMB 방송망 구축에 있어서 SFN(Single Frequency Network)의 특성을 고려한 측정이 필수적이다. 또한 T-DMB의 커버리지를 산출하기 위해서는 이동 측정, 다각적인 수신 품질 분석을 위한 측정 항목지원, 방대한 측정 데이터의 효율적인 관리, 전자지도를 이용한 측정 결과 분석이 필요하다. 본 논문에서는 위의 사항을 고려하여 T-DMB에 적합한 새로운 측정 시스템에 대한 요구 사항을 도출하고, T-DMB를 위한 통합 측정 및 분석 시스템을 제안하였다. 제안한 시스템은 KBS T-DMB 방송망 구축과 필드 테스트에 적용되어 효율성과 정확성을 입증하였다.

• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.17-27
• /
• 2011

본 논문에서는 솔더의 온도 변화에 따른 변형 거동을 평가하기 위하여 솔더 재료의 열변형 거동을 파악할 수 있는 전단시편을 고안하여 온도변화에 따르는 열변형 실험과 유한요소해석을 수행하였다. 전단시편은 열팽창계수가 다른 두 금속 막대와 그 사이 공간에 접합된 솔더로 구성되어 있으며, 솔더는 유연 솔더 (Sn/36Pb/2Ag)와 무연 솔더 (Sn/3.0Ag/0.5Cu) 두가지를 대상으로 하였다. 실시간 무아레 간섭계를 이용하여 세 온도 사이클 동안의 각 온도단계에서 변 위 분포를 나타내는 간섭무늬를 얻고 그로부터 온도에 따른 유연 솔더와 무연 솔더의 열변형 특성을 비교하였다. 유한요소해석을 통하여 여러 연구자가 제시한 솔더의 점소성 물성치를 평가하였으며 유연 솔더의 경우에는 Darveaux가 제안한 Anand 모델, 무연 솔더의 경우 Chang이 제안한 Anand 모델을 사용한 해석 결과가 실험 결과와 가장 일치한다는 것을 밝혔다. 평가된 재료 모델을 사용하여 무연 솔더와 유연 솔더가 포함된 전단시편을 유한요소 해석하고 솔더의 점소성 거동 을 자세하게 분석하였다.