• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1282-1289
• /
• 1989

Dual field speckle interferometry that is sensitive to the surface displacement of the object is constructed, and fringe patterns that have the displacement-informations are analysed using digital image processing. From 10\ulcorner to 80\ulcorner with respect to each specklegrams are obtained by double-exposure techniques, which are analysed by the proposed system and algorithm. Up to 10\ulcorner displacement, near measurable lower bound of Speckle Interferometry, fringe visibility is decreased due to decreasing fringe density, therefore relative errors are produced over 10% but over that displacement, relative errors are produced below 5%. Particularly, it is observed that spatial frequencies of each displacement are comparatively linear.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.12
• /
• pp.1200-1207
• /
• 2007

An experimental test is presented for photoelastic stress analysis around a crack tip in tensile loaded plate. The hybrid method coupling photoelastsic fringe inputs calculated by finite element method and complex variable formulations involving conformal mappings and analytical continuity is used to calculate full-field stress around the crack tip in uniaxially loaded, finite width tensile plate. In order to accurately compare calculated fringes with experimental ones, both actual and regenerated photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. Regenerated fringes by hybrid method are quite comparable to actual fringes. The experimental results indicate that Mode I stress intensity factor analyzed by the hybrid method are accurate within three percent compared with ones obtained by empirical equation and finite element analysis.

• The Research Journal of the Costume Culture
• /
• v.28 no.4
• /
• pp.429-445
• /
• 2020

The purpose of this study is to provide ideas for the development of bag design by analyzing the expression types and aesthetic formativeness of modern bag design using tassels and fringe given the newtro trend pursuing analog sensitivity in modern society. The methods and scope of this study are as follows. First, the related literature and internet data were reviewed in order to examine the expression types and characteristics of the bags of the West and East. Next, the definition and characteristics of tassel and fringe decoration in terms of the history of clothing were analyzed. Finally, the expression types and aesthetic formativeness of tassels and fringe were derived through the analysis of modern bag design shown in the fashion collections since 2010. The bags decorated with the tassels and fringe bring a variety of visual effects depending on the attachment position, direction and material composition, concentrating the gaze and radiating original style. In this study, the expression of tassels and fringe in modern bag design was classified into three types: surface decoration, shape variability, and object combination. Next, the aesthetic formativeness of modern bag design using tassels and fringe as decorative elements appeared through the mixture of heterogeneous materials and playfulness through imagination, exaggeration through extension of length and volume, and retro characteristics through reinterpretation of tradition. This study is expected to contribute to creative ideas of modern bag design which requires a global sense, which has been used in various cultures for a long time.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.23-36
• /
• 1990

The various composite materials have been developed with the development of high strength material and the increasement of composite material usage. Therefore many researchers have studied about the stress analysis and the fracture mechanics for composite materials through the experiment or the theory. Among the experimental methods, the photoelastic experiments have been used for the stress analysis of the isotropic structures or the anisotropic structures. To analyze the stresses in the orthotropic material with photoelastic experiment, the basic physical properties ( $E_{L}$, $E_{T}$, $G_{LT}$ , .nu.$_{LT}$ ) and the basic stress fringe values ( $f_{L}$, $f_{T}$, $f_{LT}$ )are needed, therefore the relationships between the basic physical properties and the stress fringe values were derived in this paper. When the stress fringe value is very large, it was assured by the experiment that the relationships are established both in the room temperature and in the high temperature (T = 130.deg. C). Therefore the basic physical properties can be obtained from the relationships by measuring stress fringe values instead of measuring the basic physical properties.rties.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1982-1989
• /
• 2004

In photoelasticity, the directions of principal stresses are given by isoclinic fringe patterns. In this study, photoelastic theory is represented by Jones calculus and the photoelastic 8-step phase shifting method is described. A feasibility study using computer simulation is done to get isoclinics from photoelastic fringes of a circular disk under diametral compression. Fringe patterns of the disk are generated from the stress-optic law. The magnitudes of isoclinics obtained from the fringe patterns of computer simulation and experiment are compared with those of theory. The results are close between them. Then, the 8-step phase shifting method is applied to get distributions of isoclinics along the specified lines of a cuved beam plate under tensile load. Experimental results obtained from the phase shifting method were compared with those of finite element analysis (ANSYS). It is confirmed that measurement of isoclinic distributions is possible by use of photoelasitc phase shifting method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.1
• /
• pp.16-24
• /
• 1992

Moire interferometry using a diffraction grating and a laser is a powerful technique for analizing small deformation of a specimen. In the method, the x and y-directional fringe patterns are obtained by using the x and y-directional sets of two beams. If the both sets of two beams are simultaneously incident to the specimen, the x and y-directional fringe patterns are super imposed. In this case, it is difficult to separate each directional fringe pattern. Therefore each fringe pattern has been separately recorded by selecting each set of two beams. In order to analyze a two-dimensional strain changing with time, Moire interferometry using the two-dimensional fourier transform method is proposed and the x and y-directional fringes are separated. By this method, the thermal deformation of a glass plate is analyzed.

• Journal of the Optical Society of Korea
• /
• v.19 no.5
• /
• pp.494-502
• /
• 2015

This paper introduces methods to measure vibration using a fringe pattern. These methods use variations of a fringe pattern in reflective monochromatic interferometry, without additional components. With the proposed methods we measured the vibrations of four waveform with amplitude 100 nm. When the vibrational amplitude is greater than a quarter wavelength of the light employed, however, the measured results are distorted due to ambiguity. Thus we propose advanced methods to solve this problem, and also measure the vibrations of two waveformswith an amplitude of $1{\mu}m$. To verify the performance of the proposed methods, we compare the results to those from an accelerometer. Multifrequency vibrations of 1, 5, 10, and 20 Hz are measured by both techniques, and the results compared in the frequency domain.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.203-208
• /
• 2002

The purpose of this study is to examine the transforming characteristics of village at the urban fringe, which are influenced by the urbanization. Three areas in the urban fringe are selected for the case study. The changed conditions in the spatial structure of those areas are reviewed through following factors : street system, an entrance of village, a boundary of village, community facility, development density, housing type, building use. The transforming characteristics are analyzed as a result of the research. In result, the community facility, development density, housing type and building use are changed largly in the transforming characteristics.

• Journal of Korean Society of Rural Planning
• /
• v.13 no.1 s.34
• /
• pp.97-109
• /
• 2007

The purpose of this research was to investigate and analyse how Community Forest Initiatives as urban fringe management initiatives made alliances with a variety of interest groups, enrol them in the urban fringe management processes using the Actor Network Theory. The Thames Chase Community Forest Initiative was selected and its area of operation included a $97 km^2$ area of green-belt area in East London. It was a instrument far improving and protecting the unique characteristics of the countryside landscape from urban developments as well as evaluating the impact of forestry inclusion in land use planning in the urban fringe. It was operated through a tiered structure comprising the Thames Chase Joint Committee and the management team. They employed a variety of devices to speak with one voice to bring about an effective operation process and to secure the enrolment of a variety of interest groups in its operational processes. Of note, the initiative's actor network impacted on improvement to and management of the countryside landscape despite not owning any land itself. As a result, when urban fringe management initiatives will be launched in South Korea to achieve a more effective and efficient urban fringe management, local councillors and representatives from public and non-government bodies should be more responsive to local communities' views and needs and work more vigorously on their behalf through lobbying, seeking media support, and so on. Moreover, better understanding and communication between local authorities' officers and management initiatives' teams are essential to avoid duplication of work practice.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2072-2081
• /
• 1992

Theoretical fringe patterns were calculated and regenerated by using power series type Williams equations and coefficients estimated from the photoelastic data. Results of calculated values were evaluated by comparing experimental data points with the regenerated theoretical fringe loops. Statistical accuracy evaluation between regenerated fringe values and experimental ones showed that standard deviation was minimum and correlation coefficient was maximum when the first four terms of Wiliams equations were used.