• Journal of Advanced Marine Engineering and Technology
• /
• v.12 no.3
• /
• pp.43-56
• /
• 1988

The image processing system consisted of the microcomputer IBM PC-XT and the graphic board (16 gray level and $640{\times}400$ pixels resolution) has been proposed, and the image processing softwares programmed in the BASIC and in the assembler language have been developed. The programs are consisted of the main menu and the sub menu, that have contained the subroutine for the capture for image data, the determination of region, the histogram, the change of value, the montage, the skeleton, the mask, the moving, the zoom, the disk access and the print. For the application, the photoelastic fringe data have been captured and analyzed. It was seen that the programs are available for the image processing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1273-1280
• /
• 2003

In this paper, transparent dynamic photoelastic experimental hybrid method for propagating cracks in orthotropic material was developed. Using transparent dynamic photoelastic experimental hybrid method, we can obtain stress intensity factor and separate the stress components from only isochromatic fringe patterns without using isoclinics. When crack is propagated with constant velocity, the contours of stress components in the vicinity of crack tip in orthotropic material are similar to those of isotropic material or orthotropic material with stationary crack under the static load. Dynamic stress intensity factors are decreased as crack growths. It was certified that the dynamic photoelastic experimental hybrid method was very useful for the analysis of the dynamic fracture mechanics.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1407-1412
• /
• 2003

In MEMS devices, packaging induced stress or stress induced structure deformation become increasing concerns since it directly affects the performance of the device. In this paper, deformation behavior of MEMS gyroscope package subjected to temparature change is investigated using high-sensitivity $Moir{\acute{e}}$ interferometry. Using the real-time $Moir{\acute{e}}$ setup, fringe patterns are recorded and analyzed at several temperatures. Temperature dependent analyses of warpages and extensions/contractions of the package are presented. Linear elastic behavior is documented in the temperature region of room temperature to $125^{\circ}C$. Analysis of the package reveals that global bending occurs due to the mismatch of thermal expansion coefficient between the chip, the molding compond and the PCB.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.160-170
• /
• 2002

Many of aged and damaged concrete structure have been revitalized with composite reinforcement. Flexural behaviors of composite-patched concrete specimens are characterized by high-sensitivity moire interferometry. The three-mirror, four-beam interferometry system and a compact loading system are used for obtaining singe patterns representing whole-field contour maps of in-plane displacements. It is seen from the calibration test for the loading system that the measured bending displacement is in excellent agreement with the displacement calculated by the beam theory. The crack opening displacement as well as the bending and the horizontal displacement fur the notched and unnotched specimen are investigated. The results also show that the notched specimen reinforced by a composite sheet has sufficient stiffness and strength compared to the original concrete specimen.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.7
• /
• pp.23-32
• /
• 2004

A spatial simulation model for rural and urban sprawl phenomena was developed with GIS and cellular automata techniques. The model finds out built-up areas invading toward rural areas required for development of existing urban area. Probability of land use change for optimizing the development area was determined using a land suitability analysis method interfaced with GIS methods, based on several criteria in terms of geographic and accessibility factors such as slope of land and distance from city center. Weighting values of the criteria were quantified by an analytic hierarchy process method. For model applicability test, the parameters of criteria were calibrated based on the changes in time series land use data of the test city for 1986, 1996, and 2000, which were classified by remote sensing techniques. Simulated and observed areas in land use maps for city shape of 1996 showed good similarities with each other through a morphology verification method. The model enabled us to evaluate the spatial expansion phenomena of cities considering boundary conditions, and also to simulate land use planning for rural areas in urban fringe.

• Proceedings of the Korean Society for Environmental Edudation Conference
• /
• 2002.12a
• /
• pp.79-85
• /
• 2002

Inquiry activity contents presented at a chapter on natural environment and our lives in 6 science textbooks of the middle school were analyzed based on kinds of the inquiry Loaming classified by textbook. The number of inquiry activity subjects showed severe variation as mean value was 8.3${\times}$3.7 ranged from 4 to 15. Moreover, textbooks had little common point among each other as the percentage of subjects appeared together in the textbooks more than 3 kinds, 50% of total ones investigated, was just 26.3%. Data interpretation occupied significant position in the inquiry activity as 42% of total activity contents, whereas observation and experiment (or survey) did slight part of the activity as 10% and 16%, respectively even though they are main factors of science education. A model for field education based on the reasonable common subjects was prepared in the Gildong ecological park located In the eastern fringe of Seoul as a plan in order to solve the problems.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.111-117
• /
• 2011

Full-range spectral domain optical coherence tomography (SD-OCT) with a 1-${\mu}m$ band light source is shown here. The phase of the reference beam is continuously stepped while the probing beam scans the sample laterally (B-scan). The two dimensional spectral interferogram obtained is processed by a Fourier transform method to obtain a complex spectrum leading to a full-range OCT image. A detailed mathematical explanation of the complex conjugate resolving method utilized is provided. The system's measurement speed was 7.96 kHz, the measured axial resolution was $9.6{\mu}m$ in air and the maximum sensitivity 99.4 dB. To demonstrate the effect of mirror image elimination, In vivo human eye pathology was measured.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.4
• /
• pp.105-112
• /
• 1999

Landcover change is an important factor that changes structure and function of regional ecosystem. As the rise of concern on environment quality, many studies are trying to quantify and evaluate the landsacpe in recent days. In this study, using landscape indices with RS(Remote Sensing) and GIS(Geographic Information System) technology, spatio-temporal variations of areas and distribution of forest patches were examined in the Chonan from 1985 to 1996. Fragstats 2.0 was employed to analyze and compute 31 landscape indices from 52 landcover maps. A result of this study showed that area of forest and paddy decreased as a result of urban sprawl. Especially from 1993 to 1996, the change of land use progressed rapidly because of merging a city and a country in Chonan. The size of patch in forest had been smaller and irregular form, heterogeneity of size of forest patches within sub-basin increased, and variety of patch types around forest patches increased from 1985 to 1996.

• Journal of the Optical Society of Korea
• /
• v.19 no.2
• /
• pp.165-168
• /
• 2015

A simple method to determine the focal length of a lens using the Talbot image is presented. This method uses only one grating, requiring neither Moir$\acute{e}$ fringe analysis nor the angle between the gratings. The original Fourier transform was used to access the spectrum beyond the limitation set of the usual fast Fourier transform to determine the (de)magnification accurately enough to be used for the focal length. A set of Talbot images simulated numerically with the Fresnel diffraction integral was used to demonstrate the method. For focal lengths between 5550 mm and 5650 mm, the mean difference between the focal lengths determined from the Talbot images and the true values was 3.3 mm with the standard deviation of the difference being 3.8 mm. The true focal lengths can be recovered with an accuracy of 0.06%.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.199-203
• /
• 1997

Fine displacement of spherical suface was detected and analyzed by Twyman-Green interferometer and the interferogram analysis using Fourier transform method. The surface profile was obtained from single interferogram by introducing the carrier freguency to the interferogram. The interferogram was processed in the spatial frequency domain by fast Fourier transform, and the phase distribution was obtained by inverse Fourier transform. The 3-dimensional distribution for the surface displacement was obtained. It was compared with the calculated surface displacement and the error was less than λ/10.