• 제목/요약/키워드: fringe analysis

검색결과 239건 처리시간 0.03초

광탄성 위상이동법을 이용한 인장판 경사균열 선단주위의 프린지 해석 (Fringe Analysis around an Inclined Crack Tip of Finite-Width Plate under Tensile Load by Photoelastic Phase-Shifting Method)

  • 리웨이정;백태현;홍동표;이병희;서진
    • 비파괴검사학회지
    • /
    • 제32권1호
    • /
    • pp.27-33
    • /
    • 2012
  • 광탄성법은 실험역학에서 응력 또는 변형률을 해석하기 위한 여러 실험방법 중의 하나이며, 다양한 종류의 구조물의 응력 분포를 실험적으로 결정하는 기법이다. 광탄성법은 광탄성 영상의 등색 프린지와 등경 프린지로부터 광탄성 시편에 나타나는 전체의 응력장 분포를 정밀하게 측정할 수 있다. 본 논문에서는 여러 가지 광탄성 기법중 8단계 위상이동법(8-step phase-shifting method)에 관한 이론을 살펴보고, 경사균열이 있는 평판 시편에 인장을 가하여 나타난 광탄성 프린지로부터 경사균열 선단주위의 응력분포를 8단계 위상이동법으로 결정한 후, 이들 결과를 유한요소법(FEM)에 의한 결과와 비교하였다. 8단계 위상이동법을 이용한 실험에 의해 측정된 프린지 차수는 유한요소법에 의한 계산된 프린지 차수값에 근접하였다.

모아레 원리를 이용한 스핀들의 반경방향 회전정도 측정 (Measurement of Radial Error Motions of a Rotating Spindle by Moire Topography)

  • 박윤창;김승우
    • 대한기계학회논문집
    • /
    • 제17권11호
    • /
    • pp.2723-2729
    • /
    • 1993
  • Moire principles are applied to the measurement of the spindle radial error motion. As opposed to conventional techniques, no master cylinder or ball is needed in the measurement so that the offset and out-of-roundness errors of the master can be inherently eliminated. Two periodic circular gratings are used, one is made on the spindle and the other is held stationary on the reference frame. When the two gratings are seen superimposed during spindle rotation, an interference fringe pattern is observed from which the information on the eccentricity between the two gratings can be extracted with high precision. The optical design and fringe analysis techniques of a prototype measurement system are described in detail with exemplary measurement results.

Radar Measurement of Slow Deformation in the Baekdusan Stratovolcano

  • Kim, Sang-Wan;Won , Joong-Sun
    • 대한원격탐사학회지
    • /
    • 제21권3호
    • /
    • pp.221-228
    • /
    • 2005
  • Baekdusan is a Cenozoic stratovolcano in which a series of micro-seismic events and gaseous emissions have been reported in 1990s. Two-pass DInSAR technique was applied to determine displacement in the volcano by using 10 ERS SAR and 41 JERS-1 SAR datasets. Most interferometric phases out of 58 JERS-1 differential interferograms showed concentric fringe patterns that correlated with elevation. From an analysis of fringe-duration relation, the fringe patterns were found to be severely distorted specifically by stratified troposphere. To estimate the tropospheric delay, we used the data in the Sobaeksan located about 20 km away from the summit of Baekdusan. The maximum and mean magnitudes of the phase delay in the Baekdusan were respectively 13.8 cm and 3.8 cm over 1200 m in altitude. After removing tropospheric effects, a mean inflation rate was estimated to be about 3 mm per year from 1992 to 1998. Although the inflation rate of the volcano is inconclusive without ground truth data, the results indicate that there exists slow upward deformation in the Baekdusan volcano.

광탄성 4단계 위상 이동법과 유한요소법에 의한 크레인 훅의 응력분포 비교 (Stress Distribution of a Crane Hook by Photoelasticty Using 4-step Phase Shifting Method and finite Element Method)

  • 백태현;김환;이춘태
    • 비파괴검사학회지
    • /
    • 제24권1호
    • /
    • pp.38-44
    • /
    • 2004
  • 본 연구에서는 크레인 훅을 광탄성 재료의 일종인 '포토플렉스'를 이용, 2차원으로 모델링하여 힘을 가하였을 경우, 최대 압축 및 인장 응력이 발생되는 선상에서 광탄성실험법, 단순 곡선보 이론 및 유한요소법을 이용하여 응력을 측정하고 계산하였다. 특히, 광탄성 실험은 재래식 측정법에 의한 타디보간법, 프릭지 세선처리법 그리고 최근 개발된 4단계 위상이동법 등 세 가지 방법을 이용하였다. 광탄성 4단계 위상이동범은 주응력 방향, 즉 등경선이 일정한 선상에서는 연속적인 응력분포를 얻을 수 있는 장점이 있다. 크레인 훅에서 주응력 방향이 일정한 선상에 발생된 응력은 3가지 서로 다른 광탄성 실험법에 의해 측정된 길과가 잘 일치하였다 광탄성법에 의한 결과는 훅의 끝단 부근을 제외하고는 단순곡선보 이론이나 유한요소 해석결과와 대체적으로 비슷하였으나, 정확히 일치하지는 않았다. 이러한 차이는 크레인 훅의 실제 시편의 곡률등 형상과 하중조건이 단순곡선보 이론이나 유한요소 모델링 형상과 약간 다르기 때문에 나타난 것으로 추정된다. 광탄성실험법은 형상이 불규칙하고 하중조건이 복잡할 경우 실제 발생되는 응력을 전체적으로 정밀하게 측정할 수 있으므로 응력해석에 대한 이를 및 수치해석 법을 검증하는데 활용될 수 있다.

복리후생제도 시행수준과 관계적계약과의 관계에서 상사지원 및 조직지원의 이중매개 효과 (The Influence of Fringe Benefits on Relational Contract through Superior's Support and Organizational Support)

  • 정상원;이혁준
    • 한국콘텐츠학회논문지
    • /
    • 제21권1호
    • /
    • pp.498-510
    • /
    • 2021
  • 본 연구는 사회복지사가 조직에 대해 갖는 관계적계약과 관련하여 이에 영향을 미치는 주요 요인들의 인과 관계를 검증하고자 하였다. 사회복지사의 관계적계약 인식에 영향을 미치는 요인으로서 조직의 복리후생제도 시행수준이 사회복지사가 인식하는 상사지원과 조직지원에 영향을 미침은 물론, 이것이 상사지원과 조직지원을 매개하여 관계적계약과의 관계에까지 영향을 미칠 것으로 보고 연구모형을 설정하였다. 이를 위하여 본 연구는 광주광역시에서 근무하는 사회복지사를 대상으로 설문조사를 시행하여 371명의 자료를 수거하였으며 상사지원 변수의 영향관계를 고려하여 직급이 최고경영자인 관장에 해당하는 응답자와 주요 변수에 불성실 응답을 한 경우를 제외한 최종 271명의 자료를 분석하였다. 구조방정식모형을 통해 분석한 결과, 사회복지사의 상사지원과 조직지원에 대한 인식이 높을수록 관계적계약 인식 정도도 높아졌다. 응답자가 소속된 조직의 복리후생제도 시행수준은 상사지원과 조직지원의 이중매개 경로를 거쳐 관계적계약에 영향을 미치는 것으로 나타났으며, 동시에 관계적계약에 직접적인 영향을 미치는 것으로 나타났다. 본 연구는 이러한 연구결과에 기반을 두어 사회복지사의 관계적계약 인식 제고와 관련 함의 및 후속연구의 필요성을 제시하였다.

Improvement of Contour Fringes by using Addition of Incremental Images

  • Kang, Young-June;Ryu, Weon-Jae;Park, Sang-Kyu
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제3권3호
    • /
    • pp.37-43
    • /
    • 2002
  • Electronic speckle contouring(ESC) based on electronic speckle pattern interferometry is the optical method for measuring object shape by using fringe-projection techniques. This method has the advantages of being non-contact, non-destructive and a whole-field measurement of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects can be obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shifting. In this study we proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed the addition of incremental images through the geometrical analysis to obtain the contour fringe interval when we performed the incremental addition of images and experiments based on this method. We obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.

광탄성법에 의한 유리봉 잔류응력의 정밀측정 (Accurate Measurement of Residual Stresses of Glass Rods by Photoelasticity)

  • 백태현
    • 대한기계학회논문집A
    • /
    • 제20권5호
    • /
    • pp.1524-1533
    • /
    • 1996
  • Risidual stress of cylindrical glass rods are measured by photoelasticity to study the variation of stresses with respect to heat treatment temperatures. In order to measure the stresses accurately, fringe sharpening and multiplication techniques are applied to the determination of photoelastic fringe orders. Filon's separationmethod is used to resolve circumferential and redial stress ocmponents from isochromatic fringes which are the same as in-plane maximum shearing stresses. According to the photoelastic measurements, residual stress is increased as the heat treatment temperature of the rods is raised from $560^{\circ}C$ to $650^{\circ}C$ All the circumferential stress components are changed from tensile stresses to compressive ones at approximate $R_m$/$R_o$ = 0.6, where $R_o$/ is outer radius and $R_m$any measured radius. This analysis shows that residual stresses of the glass rods approach zero if the rods are heat-treated near the strain point.

위상천이 주사격자 영사식 모아레 간섭계를 이용한 초.중학생의 배부체형고찰 (A Study of the Back Shape of the Children in Elementary and Middle Schools Using the Phase-shifting Scanning Grating Projection moire)

  • 유한길;민병일;박동석
    • 대한한의학회지
    • /
    • 제21권4호
    • /
    • pp.148-158
    • /
    • 2000
  • Objective : The purpose of this study was to investigate the back shape of school children using the phase-shifting scanning grating projection moire interferometer, which was developed by the Korea Advanced Institute of Science and Technology and is useful in evaluating three dimensional back shape. Methods : In this study the subjects consisted of 1,358 pupils [711 boys(52.36%), 647 girls(47.64%)] attending elementary and middle schools in Seoul. Their ages ranged from nine to fifteen and the average age was 12.2. With the phase-shifting scanning grating projection moire interferometer, the posterior view of the body were taken to see if there are correlations of moire fringe number, width difference between left and right, and correlation between differences in moire fringe number and width on both sides in the scapular, lumbar and gluteal regions. Results : The results were as follows : I. More frequent findings of fringe were observed on the right in all regions : in the scapular region, 309 boys(43.4%) and 156 girls(24.2%) had more fringe numbers on the right side; in the lumbar region, 68 boys(9.5%) and 11 girls(1.7%); and in the gluteal region, 160 boys(22.4%) and 63 girls(9.8%). Such tendency was striking especially in the scapular and lumbar regions, and in boys rather than in girls. In the scapula, 661 subjects(48.7%) with one moire fringe on either side need further attention and 110 subjects(8.I %) with two or more are required to do follow-up radiography for scoliosis. 2. In an analysis of width difference in the trunk, the left side is wider in all regions except for the gluteal region in boys : in the scapular region 21 boys(3.0%) and 103 girls(15.9%); in the lumbar region, 87 boys(12.2%) and 250 girls(38.6%); and in the gluteal region 197 girls(30.4%) had a wider left side and 45 boys(6.3%) showed a wider right side. 3. In correlation analysis of the number of moire fringe and width difference in each region, the side where more moire fringes were observed was significantly wider in the lumbar and gluteal regions, but not in the scapular region.(p<0.01) Conclusions : From these results, it is concluded that the back shape of elementary and middle school students in Seoul shows that the right side had more moire fringes; the left side was wider; and especially in the lumbar and gluteal regions the side where more moire fringes were observed was wider.

  • PDF

Puccinia sp.에 의한 이팝나무 잎녹병 발생 및 중간기주 보고 (First Report of Rust Disease on Fringe Tree by Puccinia sp. and Its Alternative Host)

  • 유난희;박애란;윤혁준;손연경;이병희;김진철
    • 식물병연구
    • /
    • 제26권3호
    • /
    • pp.179-182
    • /
    • 2020
  • 2018년 7월 전라남도 강진군의 가로수 전체 이팝나무에 심각한 녹병증상이 발견되어 잎을 채집하였다. 채집한 이팝나무 잎 앞면에서 황색 및 갈색의 병반과 잎 뒷면에서 황색의 녹포자기가 관찰되었고, 현미경아래에서 41.2 ㎛ 크기의 구형 녹포자와 28.84 ㎛ 크기의 구형 하포자가 확인되었다. 이팝나무 녹병균의 부분 small subunit rRNA, internal transcribed spacer (ITS) 1, 5.8S rRNA, ITS2, 부분 large subunit rRNA 염기서열을 이용하여 계통학적 유연관계를 분석한 결과, 대나무 녹병균으로 보고 되어져 있는 Puccinia kusanoi와 가까운 근연관계를 가지고 있었다. 또한 2019년 5월 무위사로 이팝나무 주변에 식재된 대나무에서도 녹병 병징이 관찰되었고, 잎 뒷면에서 동포자퇴와 동포자를 확인하였으며, 대나무에서 채집한 동포자의 염기서열 분석 결과, 이팝나무 녹병균과 100% 일치하였다. 본 논문은 대나무 녹병균으로 알려진 P. kusanoi와 근연관계가 가까운 새로운 종 Puccinia sp. JCK-KCFR1 strain (MT729824)가 국내에서 이팝나무와 대나무를 기주교대하며 녹병을 발생시키는 것을 처음으로 보고한다.