• New & Renewable Energy
• /
• v.4 no.4
• /
• pp.50-55
• /
• 2008

Recently, sea algae cultivation as carbon sink and carbon dioxide fixation have been considered. Also, various researches on bioenergy derived from sea algae and the utilization of fibers, saccharide, and lipid of sea algae have been performing. Till now, algae fibers has been used for manufacturing of paper and reinforcing of polymer composites and the extracts of sea algae are used for cosmetics, pharmaceutical materials and food such as agar. Especially, algae fiber has so similar properties to cellulose in terms of crystallinity and functional groups that it can be utilized as reinforcements of biocomposites. Biocomposites as alternatives of glass fiber reinforced polymer composites are environmentally friendly polymer composites reinforced with natural fibers and are actively applying to the automobiles and construction industries. In this paper, characteristics of algae fiber and biocomposites reinforced with algae fiber as environmentally friendly energy materials have been introduced.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.664-669
• /
• 2019

In this paper, a water-based green polymer mud is synthesized by simple compounding method. Effects of different kinds of tackifiers, their molecular weight on the viscosity of polymer mud and the effects of different fluid loss additives on mud fluid loss are studied. The results show that when polystyrene and anionic polyacrylamide with molecular weight of 8 ~ 10 million are used as the main thickening ingredient, polymer mud with high viscosity and high stability can be obtained. When the prepared polymer mud is formulated as NPAM: PEO: Hydroxypropyl cellulose(HPC) : Water = 42:10:10:100000 (unit: kg), the viscosity can reach 20.6 s, the filtration loss in 7.5 min is 24 mL, and the sand content is only 0.1 %. Compared with traditional bentonite mud, the green environment-friendly polymer mud has the advantages of small amount of waste, low environmental pollution, and low pulping cost, and can meet the construction needs for most topography and geomorphology drilling engineering.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.79-86
• /
• 2010

The environment-friendly abrasive materials of starch series has a wide range of application value such as deburring of plastic injection products, paint exfoliation and surface treatment of painted products and polishing, etc. In this study, an experiment of paint exfoliation was performed by using the environment-friendly abrasive materials made of cheap starch, and its performance was reviewed. By adjusting the grit size of abrasive materials, nozzle pressure, nozzle feed and number of nozzle repetition, paint could be exfoliated effectively. In this experiment, it was found that the most suitable condition was grit size 0.75~1.0 mm, nozzle pressure 0.4 MPa, nozzle feed 5 mm/min and number of processing repetition 2 times.

• The Research Journal of the Costume Culture
• /
• v.32 no.1
• /
• pp.86-107
• /
• 2024

Although interest in eco-friendly fashion products is increasing among scholars and industry leaders, the concept of eco-friendly products remains unclear, preventing consistent assessment of which fashion products are eco-friendly. This study conducted a content analysis of eco-friendly product information from 87 domestic and 102 foreign brands to reveal key standards for categorizing eco-friendly fashion products. Product characteristic information was coded according to the four material-based standards (i.e., organic material, regenerative material, alternative material, and sustainably produced/upcycled material). Consistency between coders was confirmed by Cohen's kappa. In results, eco-friendly fashion products are categorized by four material-based standards and two certification standards (i.e., certified, not certified). Among the four material-based categories, the greatest number of domestic and foreign companies produced eco-friendly products that were classified as the regenerative material group. In addition, companies acquired eco-friendly certifications related to the use of organic, regenerative, and alternative materials. The greatest number of eco-friendly material brands used for eco-friendly fashion products belonged to the regenerative material group. Based on the study results, a typology of eco-friendly products was suggested. This typology can benefit practitioners and academics by highlighting a need for classification system for the eco-friendly fashion products, as well as by providing insight into the categorization of eco-friendly fashion products.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.9
• /
• pp.3858-3869
• /
• 2020

In this paper, we propose a hash-chain based friendly force identification protocol for personal combatants equipped with a personal combat system in a tactical wireless network. It is imperative in military operations to effectively and quickly identify friendly forces. If the identification of friendly forces is not correct, this can cause friendly fire. In current ground operations, the identification of friendly forces by personal combatants is neither secure nor safe. To address this issue, the proposed protocol uses a hash-chain to determine if a detected person is friendly. Only friendly forces with the same materials that are assigned before they deploy can construct an initial hash-chain. Moreover, the hash-chain is changed at specific times. The performance of the proposed protocol is evaluated on the assumption that the secret key is leaked, which is the worst scenario in the security research field. We verify that the proposed protocol is secure for the various attack scenarios, such as message replay attack, fabrication attack, and Denial of Service attack.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5861-5869
• /
• 2014

Existing studies of building exterior materials have focused on the colors or textures of cladding, and in terms of a design planning approach, have focused on the use of the environment and equipment and fire safety topics from an engineering perspective. As a result, little research has been done on performance guidelines for exterior materials, specifically according to the building type. Research into eco-friendly cladding materials is also in the rudimentary stage in a practical sense. In this study, the use of exterior materials over the last ten years in domestic construction was analyzed. The usage status of building exterior materials was evaluated quantitatively by frequency analysis, and its environmental performance is proposed through complex (qualitative + quantitative) analysis. The average value of the exterior material type number used for all analyzed buildings was 2.59. Glass, metal, stone, resin, cement, wood, and clay were used in that order with regard to the usage status. The analysis found that five of the materials satisfied the high efficiency and eco-friendly grading in terms of the four characteristics of an eco-friendly exterior. A list of eight eco-friendly elements was also proposed. The eco-friendly elements and characteristics of the exterior materials were derived to provide basic guidelines for domestic construction companies and design offices.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.4
• /
• pp.270-275
• /
• 2014

This study was conducted to select and develop effect of eco-friendly organic materials for the eco-friendly prevention of Anthracnose occurred in the ginseng. Anthracnose on ginseng is occurred by Colletotrichum gloeosporioides and the crop damage is severe especially from July to August after rainy season. The test results showed that control effect by test products materials on the three years ginseng and four years ginseng field was lower in eco-friendly organic materials than that of chemical pesticide. However, the control effect of bordeaux mixture was higher with 71.3% and 73.8% levels than those of mineral matter, microbial agent, and developed plants extract mixtures (Eugenol, Curcumin, Wood vinegar, etc). On the other hand, three types of developed plants extract mixtures (3 types) showed control effect in a range of from 58.1% to 63.6% against Anthracnose which was higher as compared with plant extract alone and sodium silicate regardless of ages of ginseng. The results of this study would attribute in verifying the control effect of eco-friendly materials against Anthracnose for ginseng through investigating antimicrobial compounds contained in the plants body. Also, it would be used as control method against Anthracnose occurred in ginseng by judging the right control time through monitoring occurrence of disease.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.93-103
• /
• 2006

This study was undertaken to survey the usage of environment-friendly materials for 8 vegetable crops including cucumber, tomato, strawberry, eggplant hot pepper, lettuce, perilla leaves, and Welsh onion, cultivated under protected houses. Total of 78 environment-friendly growers in the Southern part of Korea were surveyed from 2003 to 2004. The number of materials used for a crop based on the effectiveness claimed by farmers was $21{\sim}87$ for pest control, $0{\sim}9$ for fertilizing, $2{\sim}41$ for growth promotion and $10{\sim}37$ for soil improvement. It is needed to clarify the ingredients and effectiveness of those environment-friendly materials reaching 323 items, on a science-basis in the future.

• Mycobiology
• /
• v.48 no.4
• /
• pp.326-329
• /
• 2020

Valuable natural compounds produced by a variety of microorganisms can be used as lead molecules for development of new agrochemicals. Furthermore, high-throughput in vitro screening systems with specific modes of action can increase the probability of discovery of new fungicides. In the current study, a rapid assay tested with various microbes was developed to determine the degree of respiratory inhibition of Saccharomyces cerevisiae in two different liquid media, YG (containing a fermentable carbon source) and NFYG (containing a non-fermentable carbon source). Based on this system, we screened 100 fungal isolates that were classified into basidiomycetes, to find microbial secondary metabolites that act as respiratory inhibitors. Consequently, of the 100 fungal species tested, the culture broth of an IUM04881 isolate inhibited growth of S. cerevisiae in NFYG medium, but not in YG medium. The result is comparable to that from treatment with kresoxim-methyl used as a control, suggesting that the culture broth of IUM04881 isolate might contain active compounds showing the inhibition activity for respiratory chain. Based on the assay developed in this study and spectroscopic analysis, we isolated and identified an antifungal compound (-)-oudemansin A from culture broth of IUM04881 that is identified as Oudemansiella venosolamellata. This is the first report that (-)-oudemansin A is identified from O. venosolamellata in Korea. Taken together, the development of this assay will accelerate efforts to find and identify natural respiratory inhibitors from various microbes.

• The Plant Pathology Journal
• /
• v.32 no.5
• /
• pp.423-430
• /
• 2016

Clubroot disease caused by Plasmodiophora brassicae is one of the most serious diseases in Brassica crops worldwide. In this study, the pathotypes of 12 Korean P. brassicae field isolates were determined using various Chinese cabbage including 22 commercial cultivars from Korea, China, and Japan, and 15 inbred lines. All P. brassicae isolates exhibited the typical clubroot disease on non-clubroot resistant cultivar, indicating that the isolates were highly pathogenic. According to the reactions on the Williams' hosts, the 12 field isolates were initially classified into five races. However, when these isolates were inoculated onto clubroot-resistant (CR) cultivars of Chinese cabbage, several isolates led to different disease responses even though the isolates have been assigned to the same race by the Williams' host responses. Based on the pathogenicity results, the 12 field isolates were reclassified into four different groups: pathotype 1 (GN1, GN2, GS, JS, and HS), 2 (DJ and KS), 3 (HN1, PC, and YC), and 4 (HN2 and SS). In addition, the CR cultivars from Korea, China, and Japan exhibited distinguishable disease responses to the P. brassicae isolates, suggesting that the 22 cultivars used in this study, including the non-CR cultivars, are classified into four different host groups based on their disease resistance. Combining these findings, the four differential hosts of Chinese cabbage and four pathotype groups of P. brassicae might provide an efficient screening system for resistant cultivars and a new foundation of breeding strategies for CR Chinese cabbage.