• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.45-49
• /
• 2006

The removal of copper ion from aqueous solution by adsorption with bone char that made from spent pig bone has been studied. This paper was studied the effects of bone char dosage and pH. The optimal results show that bone char adsorbs about 96.5 percent of copper ion in aqueous solution containing 50 mg/L as initial concentration at pH 5.0 when the bone char of 5g/L is used for 30 hours. Increase in the initial pH of the copper solution resulted in an increase in the copper ion uptake per weight of the sorbent Freundlich isotherm model was found to be applicable for the experimental data of $Cu^{2+}$.

• Journal of Korean Society on Water Environment
• /
• v.25 no.5
• /
• pp.750-757
• /
• 2009

The ammonium ion exchange characteristics of natural zeolite were investigated to remove ${NH_4}^+-N$. The effect of water temperature, particle size and competitive cation on the exchange capacity was examined. Ammonium ion exchange capacity tended to decrease when the temperature increased from $25^{\circ}C$ to $40^{\circ}C$. Exchange capacity was increased according to the particle size of natural zeolite comes to be small. Batch isotherm experiments were conducted for measuring ammonium ion exchange capacity. The ion exchange capacity was well described either by the Langmuir isotherm model or by the Freundlich isotherm model. The ammonium ion exchange capacity ($q_m$) of zeolite carrier can be calculated $11.744mg-{NH_4}^+/g$-carrier. The ion exchange capacity of manufactured zeolite carrier was showed a similar tendency as ion exchange capacity of powder-sized natural zeolite. Therefore, zeolite carrier can be used for increasing of nitrogen removal efficiency in the wastewater treatment plants.

• Clean Technology
• /
• v.17 no.2
• /
• pp.150-155
• /
• 2011

The removal process of heavy metal ion in aqueous solution by the functionalized silica bead was simulated using the finite difference method. Equilibrium model and non-equilibrium model were proposed and the effects of dimensionless groups and various parameters were investigated. Freundlich isotherm was used in equilibrium model and 1st order adsorption rate expression was assumed in non-equilibrium model. The comparison results by the predictions of equilibrium and non-equilibrium models showed good agreement. The predictions of equilibrium model were compared with experimental results reported in literature and showed the marginal agreement.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.7-10
• /
• 2001

Adsorption of the pesticides (phosphamidon, fenitrothion, triadimefon and diniconazole) in natural zeolite (CL $I_{N}$) and several synthetic zeolites was incestigated. The pesticides were not adsorbed on zeolites (Na-Pl, SOD, ANA, JBW and CAN) synthesized from Jeju scoria. The distribution coefficient ( $K_{D}$) and the Freundlich constant ( $K_{F}$) decreased in the following sequences. FC $C_{W}$ (waste catalytic cracking catalyst)>FA $U_{F}$ (FAU Synthesized from coal fly ash)>(FAU+Na-Pl)$_{SF}$ (the mixture of FAU and Na-Pl synthesized from the ratio of Jeju scoria 6 to coal fly ash 4 by weight)>CL $I_{N}$ among the zeolites; diniconazole>fenitrothion> triadimefon>phosphamidon. As the temperature was increased, the amount of pesticide adsorbed per unit mass of zeolite increased for FC $C_{W}$, FA $U_{F}$ and (FAU+Na-Pl)$_{SF}$ but it decreased for CL $I_{N}$, for all the pesticides used in this study. It was independent of pH for phosphamidon, fenitrothion and triadimefon, but decresed as pH was increased for all the zeolites used in this study.y.udy.y.y.y.y.y.y.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.127-130
• /
• 2015

In this study, the adsorption equilibria of acetic acid on activated carbon were investigated at the temperatures of 313.15 K and 323.15 K. The obtained adsorption data were then fitted by Langmuir, Bi-Langmuir, and Freundlich models, in which the relevant model parameters were determined by minimizing the sum of the squares of deviations between experimental data and calculated values. The comparison results revealed that Bi-Langmuir model could account for the adsorption equilibrium data of acetic acid with the highest accuracy among the three adsorption models considered.

• Journal of Environmental Science International
• /
• v.9 no.2
• /
• pp.145-149
• /
• 2000

The purpose of this study was to determine whether Vermi Cast could be used effectively to remove $SO_2$ from flue gas, and then to investigate optimum adsorption conditions. The Vermi Cast used as adsorbent was mechanically screened with 8~20 mesh sieve. The adsorption data for $SO_2$ were regressed using the Freundlich isotherm. The fit was generally satisfactory ($R^2$=0.945~0.982). With the temperature changes from 2$0^{\circ}C$ to 4$0^{\circ}C$, the constant k in Freundlich isotherm qe= $kCe^{1/n}$, decreased from 1.409 at 2$0^{\circ}C$to 0.297 at 4$0^{\circ}C$, and the exponent 1/n were decreased from 0.343 to 0.134. With the bed depth changes from 10cm to 30cm, the adsorption capacity expressed as mmol of $SO_2$ adsorbed per g of Vermi Cast increased from 0.247 to 0.381. Moisture content is an important parameter in the $SO_2$ adsorbed were observed over 0.3mmol $SO_2$ /g Vermi Cast. The best adsorption capacity was 0.487mmol $SO_2$ /g Vermi Cast, and it was obtained with moisture content 37%, temperature 2$0^{\circ}C$. From the above results, ti might be concluded that Vermi Cast is effectively as a good adsorbent to remove $SO_2$ from flue gas.

• Journal of Environmental Science International
• /
• v.9 no.2
• /
• pp.165-171
• /
• 2000

A kinetic study for anion exchange was performed for commercially available Cl- type anion exchange resin in use to remove nitrate in water. The obtained results from the batch reactor were applied to the Langmuir and Freundlich models. The constants for Lagmuir model were qmax =29.82 and b=0.202, and for Freundlich model were K=5.509 and n=1.772. Langmuir model showed betterfit than Frendlich model for the experimental results. Ion exchange reaction rate was also calculated and the the approximate first-order reaction, rate constant k1 was 0.16 L/mg.hr. Effective diffusion coefficient was obtained in the range from $9.67$\times$10^{-8} cm^2/sec$ for initial concentration change, and from $6.09$\times$10^{-7} to 3.98$\times$10^{-6} cm^2/sec$ for reaction temperature change. Activation energy during the diffusion was calculated as 26 kcal/mol.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1327-1335
• /
• 2013

Na-A zeolite (Z-Cl) was synthesized from coal fly ash, which is a byproduct of coal combustion for the generation of electricity. The adsorption of $Cu^{2+}$ and $Zn^{2+}ions$ onto Z-C1 was investigated via batch tests over a range of temperatures (303.15 to 323.15 K). The resultant experimental equilibrium data were compared to theoretical values calculated using model equations. With these results, the kinetics and equilibrium parameters of adsorption were calculated using Lagergren and Langmuir-Freundlich models. The adsorption kinetics revealed that the pseudo second-order kinetic mechanism is predominant. The maximum adsorption capacity ($q_{max}$) values were 139.0-197.9 mg $Zn^{2+}$/g and 75.0-105.1 mg $Cu^{2+}/g$. Calculation of the thermodynamic properties revealed that the absorption reactions for both $Cu^{2+}$ and $Zn^{2+}$ were spontaneous and endothermic. Collectively, these results suggest that the synthesized zeolite, Z-C1, can potentially be used as an adsorbent for metal ion recovery during the treatment of industrial wastewater at high temperatures.

• Membrane and Water Treatment
• /
• v.5 no.4
• /
• pp.295-304
• /
• 2014

Adipic acid (hexane-1,6-dioic acid) is one of the most used chemical in industrial applications. This must be separated from any environmental contaminant. In this study, adipic acid separation from wastewater by adsorption method onto Perlite or Perlite + Mn or Perlite + Cu composites was investigated. Adsorption of Adipic acid was investigated in terms of equilibrium, and thermodynamic conditions. For thermodynamic investigations the experiments carried out at three different temperatures (298 K, 318 K, 328 K). In the equilibrium studies, 2 g of perlite and its composites were determined as the optimal adsorbent amount. Freundlich and Langmuir isotherms were applied to the experimental data. Freundlich isotherms for all temperatures used in this work gave some deviations with R square values under 0.98 where as Langmuir isotherm gave good results with R square values upper 0.99 at different temperatures. As a result of thermodynamic studies, adsorption enthalpy (${\Delta}H$), adsorption entropy (${\Delta}S$), and adsorption free energy (${\Delta}G$) have been calculated for each adsorbents.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.6
• /
• pp.609-615
• /
• 2015

This study was carried out for characterization of MIO synthesized in our laboratory by co-precipitation method and applied isotherm and kinetic models for adsorption properties. XRD analysis were conducted to find crystal structure of synthesized MIO. Further SEM and XPS analysis was performed before and after phosphate adsorption, and BET analysis for surface characterization. Phosphate stock solution was prepared by KH2PO4 for characterization of phosphate adsorption, and batch experiment was conducted using 50 ml conical tube. Langmuir and Freundlich models were applied based on adsorption equilibrium test of MIO by initial phosphate solution. Pseudo first order and pseudo second order models were applied for interpretation of kinetic model by temperature. Surface area and pore size of MIO were found $89.6m^2/g$ and 16 nm respectively. And, the determination coefficient ($R^2$) value of Langmuir model was 0.9779, which was comparatively higher than that of Freundlich isotherm model 0.9340.