• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.45-49
• /
• 2007

A gearing system emits inconsistent noises from the impact of gear teeth when defects are present, but it is not easy for a noise inspector on a production line to distinguish defective products objectively. Since customers constantly complain about various noises from geared motors, it is desirable to devise an analytical technique to classify motors. However, it is difficult to separate inconsistent noises due to defective gears from the overall noise produced by a geared motor using a general signal processing method such as a FFT because low frequency impulse signals have a tendency not to appear in the frequency domain. In this paper, we propose a method that can be used to obtain more objective estimates and measurements of inconsistent noises from a gearing system. The proposed method makes use of the cepstrum domain with an applied autocorrelation and comb lifter, followed by a domain inversion.

• Honam Mathematical Journal
• /
• v.37 no.3
• /
• pp.299-315
• /
• 2015

In this paper, we study the first-order system least-squares (FOSLS) spectral method for parabolic partial differential equations. There were lots of least-squares approaches to solve elliptic partial differential equations using finite element approximation. Also, some approaches using spectral methods have been studied in recent. In order to solve the parabolic partial differential equations in parallel, we consider a parallel numerical method based on a hybrid method of the frequency-domain method and first-order system least-squares method. First, we transform the parabolic problem in the space-time domain to the elliptic problems in the space-frequency domain. Second, we solve each elliptic problem in parallel for some frequencies using the first-order system least-squares method. And then we take the discrete inverse Fourier transforms in order to obtain the approximate solution in the space-time domain. We will introduce such a hybrid method and then present a numerical experiment.

• Journal of Biomedical Engineering Research
• /
• v.34 no.4
• /
• pp.182-188
• /
• 2013

This study aims to develop a practical algorithm which can detect freezing of gait(FOG) in patients with Parkinson's disease(PD). Eighteen PD patients($68.8{\pm}11.1yrs.$) participated in this study, and three($68.7{\pm}4.0yrs.$) of them showed FOG. We suggested two time-domain algorithms(with 1-axis or 3-axes acceleration signals) and compared them with the frequency-domain algorithm in the literature. We measured the acceleration of left foot with a 3-axis accelerometer inserted at the insole of a shoe. In the time-domain method, the root-mean-square(RMS) acceleration was calculated in a moving window of 4s and FOG was defined as the periods during which RMS accelerations located within FOG range. The parameters in each algorithm were optimized for each subject using the simulated annealing method. The sensitivity and specificity were same, i.e., $89{\pm}8%$ for the time-domain method with 1-axis acceleration and were $91{\pm}7%$ and $90{\pm}8%$ for the time-domain method with 3-axes acceleration, respectively. Both performances were better in the time-domain methods than in the frequency-domain method although the results were statistically insignificant. The amount of calculation in the time-domain method was much smaller than in the frequency-domain method. Therefore it is expected that the suggested time domain algorithm would be advantageous in the systematic implementation of FOG detection.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.41-48
• /
• 2010

In this paper, we present an efficient demosaicking method using the difference between color channels in the wavelet domain. In our method, the low frequency wavelet coefficients are obtained by an edge-directive interpolation using the observed high frequency coefficients. The missing high frequency coefficients are obtained by the estimated low frequency coefficients. In order to reduce artifacts in high frequency domain and to improve visual quality, we update the high frequency coefficient using the color difference rule in the wavelet domain. We simulate our demosaicking method in the wavelet domain and compare our algorithm to the existing demosaicking schemes. Experimental results illustrate that the proposed method can generate enhanced demosaicking results.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.1
• /
• pp.16-30
• /
• 1997

Application of digital filter to the wave analysis is studied using the observed data by wave gauge. Sea wave data obtained from wave gauge always include long wave frequency components. In order to estimate the sea wave parameters, we must re-analyzed wave data by using a digital filter and the concept of mean sea level correction method. By the wave by wave analysis and spectral methods, sea wave parameters on the basis of wave data obtained by the conventional method and digital filter are compared. The best-fitted design filter determined by the necessary conditions of frequency responses, can be obtained by calculating various transfer functions. Thus, to get the best the digital filter design, both Butterworth filter and Savitzky-Golay filter of digital filter are used in the frequency and time domain, respectively. Three cases of observation wave data are calculated by applying digital filter. The components of different frequency bands in the surf zone are coexisted in three cases. The wave data for wind wave components is computed using the digital filter the surf zone and off-surf zone, and based on the filtered data, wave parameters are calculated by the spectral analysis and wave by wave analysis methods, respectively. As a results, when sea wave data observed by wave gauge are analyzed, the Savitzky-Golay method is recommended which can well appear cut-off frequency by experimental choosing filter length in the time domain. The better mean sea level correction method is the Butterworth filter in the frequency domain.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.160-168
• /
• 2011

A Frequency domain beamforming technique is widely used in sonar systems with a large number of beams and sensors. In the battlefield environment requiring real-time signal processing, it is needed to optimize the computational complexity of the spectrum computation to implement an efficient and fast frequency domain beamformer. So, in this paper, we proposed the pruned-GSFFT (pruned generalized sliding fast Fourier transform) as a new spectrum computation method. The proposed method help to reduce the computational complexity of the real-time partial spectrum computation by eliminating the redundancy between consecutive input samples and skipping the regardless frequency bands. Also the characteristics of the proposed pruned-GSFFT method and its computational complexity are compared to those of previous FFT algorithms.

• Journal of Mechanical Science and Technology
• /
• v.15 no.2
• /
• pp.232-238
• /
• 2001

Fast Fourier Transformation is employed to convert the head variation of a pipeline in the time domain to the amplitude of the frequency domain. Applying method of characteristics to a pipeline provides a significant frequency range for a surge introduced from the valve modulation. Inverse Fast Fourier Transformation and a Finite Impulse Response Filter can be used to remove any possible noise existing from the significant frequency range of an unsteady condition. A filtered signal shows higher potential for the inverse calculation of leakage detection than the noise-added signal does. The respective performances of Inverse Fast Fourier Transformation and a Finite Impulse Response Filter are compared in terms of leakage detection capability. Characteristics of the frequency range for multiple leakages were investigated to validate the effectiveness of the noise control method in the frequency domain.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.8-11
• /
• 2013

We implement the foveation and frequency sensitivity feature of human visual system in discrete cosine transform (DCT) domain. Resolution of human visual perception decays as distance from the eye-focused point, known as foveation property, and the middle frequency components give most pleasant image quality to human than the low and high frequency components, which is the frequency sensitivity property of human visual system. For satisfying the foveation property, we enhanced the local contrast at the focused regions and smoothed local contrast at the non-focused regions in the DCT domain without bringing the blocking and ringing artifacts. Moreover, the energies at each DCT frequency components is modified with various degree to fulfill the frequency sensitivity property. The proposed method is verified by the subjective and objective evaluations that it can the improve the human perceptual visual quality.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.14-15
• /
• 2000

We study the microwave characteristics of traveling-wave photodetector using the finite-difference time-domain method. We present two parameters for design, the width of PIN region and the thickness of i-layer, and analyze TWPD's property in frequency domain.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.04a
• /
• pp.267-274
• /
• 1999

Since the seismic response of dams can be strongly influenced by the dam-reservior interaction in needs to be taken into account in the seismic design of dams. In general a substructure method is employed to solve the dam-reservoir interaction problem in which the dam body is modeled with finite elements and the infinite region of a reservoir using a transmitting boundary. When the water is modeled as a compressible fluid the equation is formulated in frequency domain. But nonlinear behavior of dam body cannot be studied easily in the frequency domain method. In this study time domain formulation of the dam-reservoir-soil interaction is proposed based onthe lumped parameter modeling of the reservoir region, The frequency dependent dynamic-stiffness coefficients of the reservoir are converted into frequency independent lumped-parameters such as masses dampers and springs. The soil-structure interactionis modeled using lumped parameters in similar way. the ground is assumed as a visco-elastic stratum on the rigid bedrock. The dynamic stiffnesses of the rigid surface foundation are calculated using the hyperelement method and are converted into lumped parameters. The application example demonstrated that the lumped parameter model gives almost identical results with the frequency domain formulation.