• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8A
• /
• pp.829-837
• /
• 2008

A cellular system with fixed relays is considered to be a technology that can support high data transmission service to wide areas. However, either inter-cell interference or inter-sector interference that can be produced by adding relays to the cellular system with fixed relays does not guarantee high link performance to deteriorate function, so that resource allocation for avoidance of interference is very much important. In the paper, the cellular system performance with repeater relay has been compared with the cellular system performance with relay, and cell coverage expansion at the use of relay repeater has been compared. To compare, this paper has suggested resource allocation method to avoid inter-cell interference and inter-sector interference at installation of fixed relay on the cellular system. The proposed method can allocate different frequency resources on adjacent base stations and relays to reduce interference and to expand high data transmission area, and all of frequency bands are used at each sector to elevate efficiency of the frequency when base stations and relays operate simultaneously.

• Structural Engineering and Mechanics
• /
• v.72 no.4
• /
• pp.421-432
• /
• 2019

In high-speed railway (HSR) system, the structure-borne noise inside viaduct at low frequency has been extensively investigated for its mitigation as a research hotspot owing to its harm to the nearby residents. This study proposed a novel acoustic optimization method for declining the structure-borne noise in viaduct-like structures by separating the acoustic contribution of each structural component in the measured acoustic field. The structural vibration and related acoustic sourcing, propagation, and radiation characteristics for the viaduct box girder under passing vehicle loading are studied by incorporating Finite Element Method (FEM) with Modal Acoustic Vector (MAV) analysis. Based on the Modal Acoustic Transfer Vector (MATV), the structural vibration mode that contributes maximum to the structure-borne noise shall be hereinafter filtered for the acoustic radiation. With vibration mode shapes, the locations of maximum amplitudes for being ribbed to mitigate the structure-borne noise are then obtained, and the structure-borne noise mitigation performance shall be eventually analyzed regarding to the ribbing conduction. The results demonstrate that the structural vibration and structure-borne noise of the viaduct box girder mainly occupy both in the range within 100 Hz, and the dominant frequency bands both are [31.5, 80] Hz. The peak frequency for the structure-borne noise of the viaduct box girder is mainly caused by $16^{th}$ and $62^{th}$ vibration modes; these two mode shapes mainly reflect the local vibration of the wing plate and top plate. By introducing web plate at the maximum amplitude of main mode shapes that contribute most to the acoustic modal contribution factors, the acoustic pressure peaks at the field-testing points are hereinafter obviously declined, this implies that the structure-borne noise mitigation performance is relatively promising for the viaduct.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.522-533
• /
• 2019

The compressive sensing model for range-Doppler estimation can be expressed as an under-determined linear system y = Ax. To find the solution of the linear system with the compressive sensing method, matrix A should be sufficiently incoherent and x to be sparse. In this paper, we propose a transmission waveform design method that maintains the bandwidth required by the sonar system while lowering the mutual coherence of the matrix A so that the matrix A is incoherent. The proposed method combines two methods of optimizing the sensing matrix with the alternating projection and suppressing unwanted frequency bands using the DFT (Discrete Fourier Transform) matrix. We compare range-Doppler estimation performance of existing waveform LFM(Linear Frequency Modulated) and designed waveform using the matched filter and the compressive sensing method. Simulation shows that the designed transmission waveform has better detection performance than the existing waveform LFM.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.17-23
• /
• 2021

In the present study, a more compact dual-band slot antenna is newly proposed for Wi-Fi application. The proposed antenna is composed of rectangular two stepped slot with open end which can generate standing wave resonance at dual frequency bands and L-type microstrip feed line. The measured impedance bandwidths are 50 MHz(2.412 ~ 2.470 GHz) at low frequency band and 452 MHz(5.451 ~ 5.903 GHz) at high frequency band respectiviely. Furthermore its size of 14 × 21 mm² is reduced by 30% compared to the size of 20 × 21 mm² of a conventional similar compact slot antenna. It has the omni-directional radiation pattern characteristics of a typical dipole antenna on the H-Plane, so it is suitable for commercial wireless network applications such as Wi-Fi.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2021

Due to the Global Navigation Satellite System (GNSS) modernization, the recently launched GNSS satellites transmit signals at various frequency bands of L1, L2 and L5. Considering the Korea Positioning System (KPS) signal and other GNSS augmentation signals in the future, there is a high probability of applying more complex communication techniques to the new GNSS signals. For the reason, GNSS receivers based on flexible Software Defined Radio (SDR) concept needs to be developed to evaluate various experimental communication techniques by accessing each signal processing module in detail. In this paper, we introduce a multi-constellation (GPS/Galileo/BeiDou) multi-band (L1/L2/L5) SDR by utilizing Ettus USRP N210. The signal reception module of the developed SDR includes down-conversion, analog-to-digital conversion, signal acquisition, and tracking. The down-conversion module is designed based on the super-heterodyne method fitted for MHz sampling. The signal acquisition module performs PRN code generation and FFT operation and the signal tracking module implements delay/phase/frequency locked loops only by software. In general, it is difficult to sample entire main lobe components of L5 band signals due to their higher chipping rate compared with L1 and L2 band signals. Experiment result shows that it is possible to acquire and track the under-sampled signals by the developed SDR.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.261-271
• /
• 2022

This paper is the study in Korea to secure new frequency resources available at sea among terrestrial DTV (Digital TV) broadcasting bands. Focusing on Incheon and Jejudo in the west Sea of Korea, the possibility of using TVWS frequencies of DTV broadcast signals (channels 14-51, 470~698 MHz) was studied. According to the analysis, three channels, channel 19 (503 MHz), channel 37 (611 MHz) and channel 39 (623 MHz) can be used as TVWS available channels without interference with DTV in all nearby seas such as Incheon Port and Jeju Port. On the other hand, two channels, Channel 23 (527 MHz) and Channel 33 (587 MHz), were divided into strong DTV signals in the section between Incheon Port and Jeju Port, making it difficult to use them as available frequencies for TVWS on the west coast.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.81-89
• /
• 2022

This study measured the radio environment of 10 domestic institutions with CubeSat ground stations for 24 hours in three frequency bands (VHF/UHF/S-band) allocated by the International Telecommunication Union (ITU). The impact of the RF environment around the ground stations on CubeSat downlink frequencies was analysed and compared with acceptable interference noise requirements from the CubeSat RF link. The findings indicate that not only the selection of downlink frequency but also the configuration of RF communication link design and ground station system of CubeSat should consider the S-band RF environment around the ground station due to the presence of several wireless devices.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.2
• /
• pp.78-87
• /
• 2006

In this paper. we propose an effective mask estimation scheme for missing-feature reconstruction in order to achieve robust speech recognition under unknown noise environments. In the previous work. colored noise is used for training the mask classifer, which is generated from the entire frequency Partitioned signals. However it gives a limited performance under the restricted number of training database. To reflect the spectral events of more various background noise and improve the performance simultaneously. a new Bayesian classifier for mask estimation is proposed, which works independent of other frequency bands. In the proposed method, we employ the colored noise which is obtained by combining colored noises generated from each frequency band in order to reflect more various noise environments and mitigate the 'sparse' database problem. Combined with the cluster-based missing-feature reconstruction. the performance of the proposed method is evaluated on a task of noisy speech recognition. The results show that the proposed method has improved performance compared to the Previous method under white noise. car noise and background music conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1204-1209
• /
• 2004

Random amplification of polymorphic DNA-Polymerase Chain Reaction (RAPD-PCR) analysis was carried out using DNA samples of 30 animals of Rathi cattle and 42 animals of Tharparkar cattle. Genomic DNA was isolated as per standard protocol and evaluated for its quality, purity and concentration. Twenty three random primers were screened out of which 15 primers yielded satisfactory amplifications and were used for further analysis. Average numbers of polymorphic fragments per primer were 7.07${\pm}$0.86 in Rathi and 6.80${\pm}$0.61 in Tharparkar cattle. The percentage of polymorphic bands in these two cattle breeds were 86 and 87%, respectively. Within breed genetic similarities for pooled over primers in the animals of Rathi and Tharparkar breeds were .577${\pm}$0.30 and 0.531${\pm}$0.02, respectively on the basis of band frequency (BF) and 0.645${\pm}$0.04 and 0.534${\pm}$0.04, respectively on the basis of band sharing (BS). Averages of between breed genetic similarities for pooled over primers were 0.97 and 0.92 according to BF and BS, respectively, which reflect higher degree of genetic similarity between Rathi and Tharparkar cattle breeds. Index of genetic distance based on BF and BS for pooled over primers was 0.030${\pm}$0.011 and 0.088${\pm}$0.031, respectively. Percentage of polymorphic bands and within-breed genetic similarities on the basis of band frequency (BF) and band sharing (BS) for pooled over primers revealed higher genetic similarity in Rathi than Tharparkar cattle population. High estimates of between breed genetic similarities for pooled over primers indicated that either Rathi is having decent from Tharparkar or both the cattle breeds are having common descent. Low value of Index of genetic distances between these two cattle breeds may be due to the fact that Rathi and Tharparkar cattle breeds are the native of Thar Desert in Northwest India. The results of between breed genetic distances also confirm the existence of high degree of genetic similarity between these two breeds of cattle.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.779-789
• /
• 2014

Cognitive radio (CR) technology based on geo-location database access approach and/or wideband spectrum sensing approach is absolutely vital in order to recognize available frequency bands in white spaces (WSs), and efficiently utilize shared spectrums. This paper presents a new structure for the TVWS database access protocol implementation based on Internet Engineering Task Force (IETF) Protocol to Access WS database (PAWS). A wideband compressive spectrum sensing (WCSS) scheme using a modulated wideband converter is also proposed for the TVWS utilization. The developed database access protocol technology which is adopted in both the TV band device (TVBD) and the TVWS database operates well in the TV frequency bands. The proposed WCSS shows a stable performance in false alarm probability irrespective of noise variance estimation error as well as provides signal detection probabilities greater than 95%. This paper also investigates Federal Communications Commision (FCC) regulatory requirements of TVWS database as well as European Telecommunications Standards Institute (ETSI) policy related to TVWS database. A standardized protocol to achieve interoperability among multiple TVBDs and TVWS databases, which is currently prepared in the IETF, is discussed.