• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.18-23
• /
• 2010

4$\times$4 Butler Matrix structure has been presented in this paper. It can passes the signal with equal power level and phase difference in the 824MHz to 894MHz frequency of the cellular band. Conventional Butler Matrix was implemented as a single layer substrate structure, but in this paper, we use multi-layer substrate structure and eventually we could get it reduced in size than others. We also used the LTCC coupler to reduce the size effectively, instead of using $90^{\circ}$ hybrid coupler composed of microstrip structure. we used Designer V3.5 Ansoft HFSS V11 for design of 4$\times$4 Butler matrix. Finally, we get good agreements between simulation and experimental results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.270-277
• /
• 2010

The BAMS filter is a kind of wavelet shrinkage filter based on the Bayes estimators with no simulation, therefore it can be used for a real time filter. The denoising efficiency of BAMS filter is seriously affected by the estimated noise variance in each wavelet band. To remove noise in signals in existing BAMS filter, the noise variance is estimated by using the quartile of the finest level of details in the wavelet decomposition, and with this variance, the noise of the level is removed. In this paper, to remove the image noise includingodified quartile of the level of detail is proposed. And by these techniques, the image noises of mid and high frequency bands are removed, and the results showed that the increased PSNR of ab the midband noise, the noise variance estimation method using the monotonic transform and the mout 2[dB] and the effectiveness in denosing of low noise deviation images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.49-55
• /
• 2016

To separate the CM and DM noise in the EMI generated in various electrical electronic systems, passive and active separators have been researched. These separators are an important part of an effective active EMI-filter. The passive separator has some advantages, in that it is easy to realize at a low price and its structure is very simple. However, its major drawback is that its accurate inductor realization and accurate core selection are very difficult. The active separator is smaller in size and more accurate, but its main drawback is that an op-amp which has a broad band frequency response is necessary, its cost is high, and a DC power circuit is required. This paper compares the characteristics of EMI filters which apply the existing passive separator and proposed active separator. It was concluded that an active separator is needed for expensive and accurate equipment, whereas a passive separator is sufficient for inexpensive and general purpose EMI filters.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.9
• /
• pp.546-551
• /
• 2016

$SrSnO_3:Tb^{3+}$ phosphor thin films were prepared on sapphire and quartz substrates in the growth temperature range of $100{\sim}400^{\circ}C$ by using the radio frequency magnetron sputtering deposition. The resulting $SrSnO_3:Tb^{3+}$ thin films were characterized by X-ray diffraction, scanning electron microscopy, ultraviolet-visible-infrared spectrophotometer, and photoluminescence spectrometer. The results indicated that the morphology, optical transmittance, band gap energy, and luminescence intensity of the phosphor thin films significantly depended on the growth temperature. All the thin films, regardless of the type of substrate, showed an amorphous behavior. As for the thin films deposited on sapphire substrate, the maximum crystallite size was obtained at a growth temperature of $400^{\circ}C$ and the strongest emission was green at 544 nm arising from the $^5D_4{\rightarrow}^7F_5$ transition of Tb3+. The average optical transmittance for all the thin films grown on sapphire and quartz substrates was decreased as the growth temperature increased from 100 to $400^{\circ}C$. The results suggest that the optimum growth temperatures for depositing highly-luminescent $SrSnO_3:Tb^{3+}$ phosphor thin films on sapphire and quartz substrates are 400 and $300^{\circ}C$, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.453-453
• /
• 2010

In this study, zinc germanate ($Zn_2GeO_4$) thin films has been synthesized by using radio frequency magnetron sputtering and the divalent manganese-activated luminescence was characterized. X-ray diffraction patterns of the as-deposited $Zn_2GeO_4$:Mn films showed only a broad feature, indicative of an amorphous structure. Scanning electron microscopy images revealed that the as-deposited $Zn_2GeO_4$:Mn has a smooth surface morphology. The $Zn_2GeO_4$:Mn films were found to be crystallized by annealing in air ambient at temperatures as low as $700^{\circ}C$. The annealed $Zn_2GeO_4$:Mn possessed a rhombohedral polycrystalline structure. The broad-band photoluminescent emission spectrum from 470 to 650nm was obtained at room temperature from the $Zn_2GeO_4$:Mn films. The emission peak was centered at around 535nm in the green range, which originates from the intrashell transition of manganese $3d^5$ electrons from $^4T_1$ excited-state level to the $^6A_1$ ground state. The PL emission spectrum had an asymmetric line shape, which results from the $^3d_5$ electron transitions of divalent manganese ions located at different sites of the zinc germanate host crystal lattice. Electroluminescent devices were fabricated using $Zn_2GeO_4$:Mn as an emission layer. The fabricated devices showed a green EL emission similar to the PL emission. The CIE chromaticity color coordinates of the EL emission were determined to be x=0.308 and y=0.657.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.808-816
• /
• 2010

Spectrum sharing between wireless systems becomes a critical issue due to emerging new technologies and spectrum shortage. Since WRC-07 allocated 3400-3600MHz band for the coming fourth generation (4G) or IMT-Advanced on a co-primary basis along with existing Fixed Wireless Access (FWA), it requires spectrum sharing studies to solve the interference problems between two systems. In this paper, I propose the separation distance between service coverages as a sharing fundamental criterion based on the interference to noise power ratio (I/N) received in a FWA base station from several IMT-Advanced base stations on the cellular systems. Especially, some results imply that I/N values compared to the worst case can be greatly reduced with MIMO SDMA interference mitigation technique of IMT-Advanced base stations so that these two systems can co-exist in the same frequency with appropriate separation distance.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2013

In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.491-496
• /
• 2013

In this paper, a half-wavelength folded-slot antenna, which can be applied to RF module for 3G mobile communications by which security lights are monitored and controlled, is proposed. The proposed antenna can be regarded as modified folded-slot structure which has the size reduced to a half of conventional ${\lambda}g$ folded-slot antenna and can be placed at the ground plane edge. In spite of that, the proposed antenna still maintain the advantage of conventional folded-slot antenna that input impedance is close to $50{\Omega}$. The antenna is designed and fabricated within the upper space of $40.5{\times}10mm^2$ on $40.5{\times}62mm^2$ substrate for 3G mobile communication frequency band. The measured impedance bandwidth and antenna gain are 390 MHz and 2 dBi respectively.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.299-304
• /
• 2020

This paper proposes the design of circular sector shaped power divider-combiner with a planar structure. This structure can be constructed in series, and due to the circular sector shape, it is possible to simplify circuit configuration and improve the amplitude and phase balanced characteristics of the output. It has a simple input matching circuit and an RC parallel circuit was inserted between the output ports to improve the reflection coefficient and isolation of the output. Since the designed divider-combiner are structurally designed in a symmetrical shape of a sector, even if the output ports are composed of two or four output ports, they have excellent characteristics with an amplitude balance of ± 0.1 dB and a phase balance of ± 1o between outputs. To prove these characteristics, it was confirmed that the characteristics of the planar power divider-combiner fabricated at an operating frequency of 2 GHz are in good agreement with the simulation.