• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.180-184
• /
• 2003

The intrauterine inseminator (IUI) was developed to provide the method of depositing dog semen into the uterine body instead of the vagina. The IUI consists of a vaginal endoscope, a balloon sheath, and injection catheter. When the endoscope is inserted into the vagina and the balloon expanded with air, the cervical os becomes visible so a injection catheter can be inserted through the cervix for deposition of the frozen-thawed semen. The efficacy of the IUI device was compared to intra-vaginal artificial insemination using semen that had been collected and frozen from pooled sperm-rich fraction of ejaculates collected from two Jindo dog donors. Aliquots of semen were extended with a Tris-egg yolk diluent, centrifuged, the seminal plasma removed, the pellet resuspended with the same diluent, and cooled to $5^{\circ}C$ over a 2 h period. A Tris-egg yolk-glycerol extender was added at $5^{\circ}C$; after 1 h, semen was loaded into 0.5 ml straws, and straws were frozen in LN vapor for 5 min, and immersed in LN for storage. The final sperm concentration for freezing was approximately $100{\times}10^{6}cells/ml$. The straws were thawed at $70^{\circ}C$ for precisely 6 sec, 1.5 ml Tris-egg yolk buffer at $38^{\circ}C$ added, and the 2 ml of thawed semen was used for a single insemination using the IUI device. Each bitch was inseminated at optimal insemination point, which was estimated by vaginal epithelial cells staining and progesterone concentration analysis. Use of the IUI device resulted in 21 of 26 females giving birth to 89 pups ($4.2{\pm}1.6$ pups per litter), while intra-vaginal AI resulted in 6 of 15 females whelping a total of 17 pups ($2.8{\pm}1.2$ pups per litter). We believe the IUI device is easier to use than previously described devices used for intrauterine insemination. In our experience the expansion of the balloon has a calming effect on the bitch that aids the inseminator. These results indicate that the IUI device was able to provide high fertility with 50 million frozen sperm per insemination and two inseminations.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.107-112
• /
• 2004

This study was carried out to investigate properties of the bread prepared by applying emulsifiers to the frozen dough, Doughs made by the sponge and dough method with the sweet dough formula were quickly frozen at $-40^{\circ}C$ and stored for 6 weeks at $-20^{\circ}C$. The effects of emulsifiers on the number of yeast cells, the volume of the bread, the hardness and the quality evaluation were investigated after frozen doughs were thawed, fermented and baked every week. In the effect of the number of yeast cells, SSL 0.3% and DATEM 0,2% produced a more effective result than others during the freezing storage, The highest loaf volume was formed in bread supplemented with SSL 0,3% and DATEM 0,2%, In the moisture content, bread supplemented with SSL 0,5% showed the highest value, Bread supplemented with SSL 0,3% and DATEM 0,2% produced the lowest value of bread hardness and received the highest score in quality evaluation, In this study, the addition of SSL 0,3% and DATEM 0,2% in making frozen dough led to better bread quality as compared to others.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.770-774
• /
• 2002

The effect of mixing ratio of materials and their retort processing conditions on the physical properties and preference of oyster porridge were investigated. Rice gave adequate viscosity (about 800 cp) to the porridge as it was used 10～12% level and half of it was ground. Potato starch, waxy corn starch, and Perfectamyl AC showed small variation in viscosity unrelated to the temperature, that was a good condition for high quality porridge. Especially, waxy corn starch had a good property for retort porridge because its viscosity was maintained high during the processing and decreased to preferable one after processing. Purity CSC, modified starch gave gum-like texture and didn't cause water-separation much after freezing and thawing treatment of the porridge. Therefore, it was good for enhancing the physical property of the porridge as a co-additive of waxy corn starch when it was used at quarter level of waxy corn starch. Xanthan gum increased dispersibility of materials and it was useful for stabilizing physical quality of the porridge without affecting preference when it was used below 0.2% concentration. As a result, the optimal material-mixing ratio was determined as rice 10% (50% of it was ground), waxy corn starch 1.5%, Purity CSC 0.5%, xmthan gum 0.2%, salt 0.3%, and water 87.5%. Oyster's porridge, retort processed with this recipe, showed stable physical property after 6 month storage at room temperature.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.24-29
• /
• 2002

The study was performed to investigate the degrees of gelatinization at various processing steps during the preparation of Dangmyuns using sweet potato, potato, corn and tapioca starches, and also determined the rehydration of the freeze dried sweet potato Dangmyun. The degrees of gelatinization after extrusion cooking showed higher value than other processing steps. The degrees of gelatinization after extrusion cooking were 63.5% in sweet potato, 80.0% in potato, 82.3% in corn, and 86.5% in tapioca Dangmyuns. The degree of gelatinization in Dangmyuns after extrusion cooking step decreased as the processing steps, such as cold storage, freezing, thawing, and sun drying, progressed. L values of color in Dangmyuns decreased in the order of corn>tapioca>potato>sweet potato Dangmyuns. The cooking loss decreased in the order of tapioca>corn>potato>sweet potato Dangmyuns. The percentage of weight gain was the highest in sweet potato Dangmyun followed by corn, potato, and tapioca Dangmyuns. The water absorption rate constant was the highest in sweet potato Dangmyun followed by corn, potato, and tapioca Dangmyuns. In the rehydration of freeze dried Dangmyuns, freeze dried sweet potato Dangmyun showed better than the others. An increase from 60% to 70% of the added amount of water in the mixing step resulted in an increase of the degrees of gelatinization after extrusion cooking from $63.4{\sim}70.7%$ to $73.8{\sim}75.0%$. An increase of the added water in the mixing step and a decrease of diameter in the extrusion cooking step slightly improved the rehydration in the boiled water of freeze dried sweet potato Dangmyun.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.85-95
• /
• 2015

PURPOSES : Recently, bonded concrete overlay has been used as an alternative solution in concrete pavement rehabilitation since its material properties are similar to those of the existing concrete pavements. Deteriorated concrete pavements need rapid rehabilitation in order to prevent traffic jams on Korean expressways. Moreover, speedy and effective repair methods are required. Therefore, the use of bonded concrete overlay with ultra-rapid hardening cement has increased in an effort to reopen promptly the expressways in Korea. However, mobile mixer is required for ultra-rapid hardening cement concrete mixing in the construction site. The use of mobile mixer causes various disadvantages aforementioned such as limitation of the construction supply, open-air storage of mixing materials, increase in construction cost, and etc. In this study, therefore, hydration accelerator in-situ mixing on polymer modified concrete produced in concrete plant is attempted in order to avoid the disadvantages of existing bonded concrete overlay method using ultra-rapid hardening cement. METHODS : Bonded concrete overlay materials using ultra-rapid hardening cement should be meet all the requirements including structural characteristics, compatibility, durability for field application. Therefore, This study aimed to evaluate the application of hydration accelerator in-situ mixing on polymer modified concrete by evaluating structural characteristics, compatibility, durability and economic efficiency for bonded concrete overlay. RESULTS : Test results of structural characteristics showed that the compressive, flexural strength and bond strength were exceed 21MPa, 3.15MPa and 1.4MPa, respectively, which are the target strengths of four hours age for the purpose of prompt traffic reopening. In addition, tests of compatibility, such as drying shrinkage, coefficient of thermal expansion and modulus of elasticity, and durability (chloride ions penetration resistance, freezing-thawing resistance, scaling resistance, abrasion resistance and crack resistance), showed that the hydration accelerator in-situ mixing on polymer modified concrete were satisfied the required criteria. CONCLUSIONS : It was known that the hydration accelerator in-situ mixing on polymer modified concrete overlay method was applicable for bonded concrete overlay and was a good alternative method to substitute the existing bonded concrete overlay method since structural characteristics, compatibility, durability were satisfied the criteria and its economic efficiency was excellent compare to the existing bonded concrete overlay methods.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.588-596
• /
• 1996

The optimum conditions of the 1st and 2nd distillation had been investigated to obtaine a high quality monomeric MDI and fire reactive polymeric MDI by purification of crude MDI. Effect of additives on the monomeric MDI's color change, dimerization and the reactivity of polymeric MDI with standard polyol system has been tested. When the monomeric MDI yield is approximately 32%, 4,4'-MDI content is above 98% in the monomeric MDI at the 1st distillation. When the separation ratio of initial portion and residue percentage, reflux ratio are set at respectively, approximately 20wt%, 9wt%, above 2 in order to minimize the content of 2,4'-MDI in monomeric MDI, the freezing point of final distilled monomeric MDI is above $38.4^{\circ}C$. Since the monomeric MDI is inherently unstable in the room condition, monomeric MDI easily changes it's color and conducts self-polymerization reaction. To increase the stability of monomeric MDI, the composition of antioxidant, which is composed of phenolic 1st antioxidant, phosphorus 2nd antioxidant, UV absorbent and Hindered amine light stabilizer are used, and benzoyl chloride as antipolymerization agent test are that APHA color is less than 20, dimer content is remained less than 0.36wt% after 45 days storage of monomeric MDI.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.356-363
• /
• 2009

This study was carried out to investigate the effect of hot boning and curing condition on the quality characteristics of ground chicken breast. Treatments were cured by four conditions follows; control (general curing method), T1 (after hot-boning and then immediately cured), T2 (after hot-boning and immediately cured, then frozen), and T3 (after hot-boning, immediately frozen, refrigerated and then cured). The pH of chicken breast in the state of pre-rigor was 6.22. The pH of cold storage or freezing chicken breast meat respectively were 5.70 or 5.61. The pH of T1 and T2 treatments were significantly higher than those of control and T3 treatment (p<0.05). After stored for 1 wk, the pH value of T1 treatment had a higher value than those of other treatments. T1 treatment had the highest water holding capacity and the lowest cooking loss among all treatments, regardless of the cooking methods. The reduction in diameter for T1 and T2 treatments was lower than those of control and T3 treatment (p<0.05). T1 treatment had the lowest fat loss and moisture loss among all treatments, and the emulsifying capacity of T1 treatment was the highest. The protein solubility of T1 treatment was significantly lower than that of T3 treatment.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.510-519
• /
• 2019

The purpose of this study was to analyze the nutrition labeling of Guk, Tang, Jjigae HMR products to provide consumers with appropriate information when selecting products, and to provide basic data on the national policies. In this study, nutritional labels of 176 products were analyzed with 57 Guk, 75 Tang, 44 Jjigae. In the menu frequency of products, Guk has the products of the specific purposes, Tang has animal protein product, Jjigae has popular products. As a result of comparing the portion size and 9 major nutrients of the product, the average sodium content of Guk was 1558.5 mg, Tang was 1472.3mg, Jjigae was 2118.0mg. By the storage temperature, the average sodium content of HMR product was 2022.9mg in freezing(below $-18^{\circ}C$), 1676.7mg in cold($-2{\sim}10^{\circ}C$), and 1250.9mg in room temperature($1{\sim}35^{\circ}C$). Therefore, it is necessary to focus on the sodium content of Frozen products in the attempt of reducing sodium in HMR products.

• Korean Journal of Food Science and Technology
• /
• v.51 no.1
• /
• pp.29-34
• /
• 2019

In this study, a commercial production stepwise method for restorative rice with high quality and microbial safety was developed. The stepwise treatment method included steaming, refrigerated aging, and low temperature drying. The soaking rice was steamed twice at $90-100^{\circ}C$, and then, the rice was aged at $0-10^{\circ}C$, frozen at $-20^{\circ}C$, and dried at low temperatures with 5 m/s wind speed at $1-20^{\circ}C$ and 85% relative humidity. Applying the three steps improved sensory qualities compared with the conventional hot air drying and made storage at room temperature for 3 months possible. Specifically, the moisture content of the restorative rice was increased to 30%, which was 4.3 times higher than the 7% of the conventional air dried rice, and the rice grain shape was well maintained. The texture and appearance of the three-step rice were significantly improved (p<0.05) in a sensory evaluation.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.187-192
• /
• 2022

The repeated monthly or weekly subculture of plant callus is labor intensive and increases the risk of somaclonal variation from the parental callus line. The most effective method for preserving plant callus is cryopreservation, which involves storage in liquid nitrogen. However, this method cannot be applied to the callus of different plant species in the same manner, so it is difficult to develop a standardized cryopreservation method. In addition, the survival rate of the frozen callus after thawing and the regeneration rate after survival are uncertain. Therefore, it is necessary to develop a method to extend the subculture interval of plant callus in an active state. In this study, active plant calli of various species without freezing was incubated at 15℃ for 4 to 12 weeks without subculture. After 12 weeks, 8 lines of plant callus grew less than 2-fold when cultured at 25℃, but at least 2 times as much when cultured at 15℃. Moreover, total antioxidant activity did not differ significantly between plant callus recovered at 25℃ after culturing at 15℃ or at 25℃. These results show that the subculture interval can be extended at a temperature of 15℃ without need for modified medium composition or additional processes. In addition, positive results in all calli of several plant species are expected to reduce labor as well as somaclonal variation by increasing the subculture.