• Journal of Korean Society of Transportation
• /
• v.14 no.3
• /
• pp.7-26
• /
• 1996

The estimation of real-time Origin-Destination(O-D) parameters, which gives travel demand between combinations of origin and destination points on a urban freeway network, from on-line surveillance traffic data is essential in developing an efficient ATMS strategy. On this need a real-time O-D parameter estimation model is formulated as a parameter adaptive filtering model based on the extended Kalman Filter. A Monte Carlo test have shown that the estimation of time-varying O-D parameter is possible using only traffic counts. Tests with field data produced the interesting finding that off-ramp volume predictions generated using a constant freeway O-D matrix was replaced by real-time estimates generated using the parameter adaptive filter.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.73-81
• /
• 2007

The purpose of this paper is to perform a basic study on the interaction between lanes, which can be achieved through analyzing traffic breakdown at the microscopic level. Using aerial photographic data for the microscopic analysis, this study analyzed the characteristics of traffic flow at a merging area. This research produced aggregated traffic data such as flows, speeds, and densities in 30 second intervals by lane for the macroscopic analysis and individual headway data by lane for the microscopic analysis. The paper contains an analysis of lane characteristics through flows, speeds, densities, and headway variations and also investigates the influence of ramp flows on mainline flows with space-time diagrams. Firstly, the merging area in this study is divided into three sections: before-merging, during-merging, and after-merging. The transition process was analyzed at each lane. Secondly, the breakdown was observed in detail with data divided in 50-foot units. The breakdown was checked through the relationships between ramp and freeway mainline flows, various techniques were proposed to analyze the breakdown, and the formation of breakdown was introduced as three stages in this study. In the near future, the findings of this study could contribute to determining the dynamic capacity on freeways by easily understanding changeable traffic breakdown patterns over time and space.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.67-85
• /
• 2018

Vehicle platooning through wireless communication and automated driving technology has become realized. Platooning is a technique in which several vehicles travel at regular intervals while maintaining a minimum safety distance. Truck platooning is of keen interest because it contributes to preventing truck crashes and reducing vehicle emissions, in addition to the increase in truck flow capacity. However, it should be noted that interactions between vehicle platoons and adjacent manually-driven vehicles (MV) significantly give an impact on the performance of traffic flow. In particular, when vehicles entering from on-ramp attempt to merge into the mainstream of freeway, proper interactions by adjusting platoon size and inter-platoon spacing are required to maximize traffic performance. This study developed a methodology for establishing operational strategies for truck platoonings on freeway on-ramp areas. Average speed and conflict rate were used as measure of effectiveness (MOE) to evaluate operational efficiency and safety. Microscopic traffic simulation experiments using VISSIM were conducted to evaluate the effectiveness of various platooning scenarios. A decision making process for selecting better platoon operations to satisfy operations and safety requirements was proposed. It was revealed that a platoon operating scenario with 50m inter-platoon spacing and the platoon consisting of 6 vehicles outperformed other scenarios. The proposed methodology would effectively support the realization of novel traffic management concepts in the era of automated driving environments.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.145-151
• /
• 2009

Current highway design standards is based on the safety under the free flow condition. The length of deceleration lane is also determined in terms of the deceleration distance which is necessary for the driers to adjust the vehicle speed from the speed limit on the main road to that on the exit ramp of the interchange. However, the queues are frequently developed on the deceleration, and the following vehicles to exit must decelerate on the main road. It may cause delay on the main road and traffic accidents. This study is to suggest a methodology to minimize such problems with the shock-wave theory. The queue length of exiting vehicles can be estimated by the design speeds, traffic volumes of main road and the exiting ramp, and the countermeasures to the operational problems. According to the results, the queue length can be shortened to 80% by upgrading the design speed of exit ramp as the amount of 10km/h. Fifty percent of queue length can be shortened by adding an additional lane on the ramp to two lanes.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.125-136
• /
• 2005

The goal of this paper is to develop freeway Origin-Destination (OD) demand estimation model using VDS and AVI data. The formulation of methodology proposed in this paper includes traffic flow technique to be able to remove the bi-level problem and optimal solution algorithm using a kalman filter algorithm. The proposed dynamic OD estimation model use ilk and off-ramp volumes collected from VDS and partial OD collected from AVI data to raise the accuracy of dynamic OD estimation. The proposed model is evaluated by using the real-time data of SOHAEAN freeway, South Korea. The result of the proposed dynamic OD estimation model based on VDS and AVI data is better than that of based on VDS data. The more AVI systems are equipped at on and off-ramp, the more excellent result of estimation accuracy is expected.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.155-164
• /
• 2008

Variable Message Signs (VMS) is one of the major components for Intelligent Transport Systems (ITS) services that provides real-time traffic and incident information to drivers. The objective of this research was to develop a method determining the optimal location of VMS considering safety and driving characteristics of various drivers. A driving simulator was utilized to evaluate how drivers can safely exit to off-ramp depending on various VMS locations while information relating route diversion was provided. The binary logistic regression and factor analysis were applied in developing a probability model that predicts the success of safe off-ramp exiting. Based on the developed probability model, a method to estimate the spacing between VMS and off-ramp is suggested. It is expected that the products of this study would be utilized as a tool in determining VMS locations for ITS planners and designers.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.41-51
• /
• 2006

In this paper, a fundamental study on the characteristics of traffic accidents according to the alignment and traffic conditions on the ramp of freeway is addressed. The macro-and-micro scope analysis of characteristics about traffic accidents on the trumpet-IC ramps is conducted depending on the entering and exit ramp types under the various conditions of traffic volume and alignment And it is turned out that the conditions of alignment. such as radius, differences of curvatures, and main road grade, and traffic volume relate to the ramp accidents of trumpet IC according to ramp types, such as direction, semi-direction, and loop. Macroscopically, AR (Accident Rate) according to trumpet IC types, A and B, is analyzed nearly equal, but Number of accidents occurred in IC type B shows about 1.5 times higher than type A. And AR of exit ramps shows three times more than entrance ramps. Microscopically, ARs for each exit-ramp type, according to the increment of traffic volume, the difference of curvatures. and the first radius, exponentially decrease respectively. But relationships between AR and the second radius or exit ramp shows inverted U-shaped. AR according to main-road grade Peaks between -1.5% and -0.5%. It is expected that the developed models not only are employed to make design of trumpet-IC ramp more cost-efficiently and safely, but also contribute to making alternatives to the reduction of traffic accidents on trumpet IC ramps under the conditions of high traffic accident rate.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.79-87
• /
• 2007

The interchanges of urban freeways have many problems with traffic operation due to high off-ramp flows and frequent congestion at adjacent intersections. The flow exiting from off-ramps is affected by the operational status and traffic volume conditions of the nearest signalized intersection. As a result, off-ramp flow cannot exit and the queue backs up the freeway mainline when queues from the signalized intersection form up to the junction of the off-ramp and street. The spacing between an off-ramp and an adjacent intersection is likely to determine the traffic conditions at the adjacent intersection. However, the current design guidelines do not consider such a factor. This study is to develop a model calculating the spacing between off-ramps and adjacent intersections considering the signal, traffic, and road conditions. The variables affecting the model in this study are effective green time (g/C), volume-capacity ratio (v/c), the number of lanes, and off-ramp volume. Various scenarios are designed to represent the effects of the variables and the road networks are constructed using VISSIM, which is a common traffic micro-simulation software package. The queue length is derived from VISSIM and this length is considered as the recommended spacing between the off-ramp and the adjacent intersection. Through the simulation analysis, regression models are developed to calculate the queue length reflecting the various conditions such as signals, traffic, and road configurations. The developed model can be used to create road design guidelines to determine the location of off-ramps in the planning stage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.38-47
• /
• 2009

This paper aims to evaluate the freeway traffic management Strategy based on exTMS according to traffic situation of freeway. As freeway user's demands increase, we thus need future-oriented and optimized traffic management. So, through improving the existing system and introducing the advanced system, these systems evaluate for not only preparing the application in real world but also preliminary feasibility. To evaluate effects of the traffic management based on exTMS, in this study, shoulder LCS, advanced VMS(assumption in it is improving next-generation system which it can be offering diverse dynamic traffic information), Ramp-metering system are applicated in simulation. In addition, this study evaluates the effect when all proposed systems are applicated, and compare the individual effect of when independent system is applicated, through considering about traffic condition of V/C=0.5, V/C=0.8, V/C=1.2. The study results show that all assumed cases, the travel speed were improved according to the increasing V/C. Furthermore, the results of evaluated the individual system show that the shoulder LCS was found to be the largest effect, and the effect of VMS(detour rate is 11%) is larger than the other cases.

• Journal of the Korea Society for Simulation
• /
• v.10 no.3
• /
• pp.47-58
• /
• 2001

Evaluation of Freeway Congestion Management Using Mesoscopic Traffic Simulator A mesoscopic simulation study to measure the effects of trip generation caused by rampant expansion of residential area around the Kyungbu corridor has been conducted. Some alternatives, which seem to be judgememtally plausible and technically feasible to mitigate such congestion, have been carefully examined and evaluated by the simulation model called INTEGRATION. Alternatives are mostly network improvements. Banpo IC dedicated ramp construction (A1), Seocho IC TSM based weaving elimination (A2), dedicated local and express separation over Seocho-Yangjae segment (A3), Heonleung IC (A4) and Daewang If installations (A5), Pangyo IC improvement (A6), Baikhyun IC (A7) and Dongbaek IC installations (A8) along with Shingal-Pangyo segment capacity addition (A9). The most capital intensive ones are A9, A5, and A4 in that order. A1, A6, A7, and A8 are short in distance but they are also capital intensive and need some construction periods. The least capital driven alternatives are h2 and A3, the h2 is easier to do, but A3 needs traffic diversion scheme during construction. The A1, A7, and A8 have been identified cost effective in terms of speed increase and travel time saving. Along with these results, some limitations and future research agenda regarding simulation have also been presented.