• Journal of Ginseng Research
• /
• v.41 no.3
• /
• pp.290-297
• /
• 2017

Background: The use of X-ray phase-contrast microtomography for the investigation of Chinese medicinal materials is advantageous for its nondestructive, in situ, and three-dimensional quantitative imaging properties. Methods: The X-ray phase-contrast microtomography quantitative imaging method was used to investigate the microstructure of ginseng, and the phase-retrieval method is also employed to process the experimental data. Four different ginseng samples were collected and investigated; these were classified according to their species, production area, and sample growth pattern. Results: The quantitative internal characteristic microstructures of ginseng were extracted successfully. The size and position distributions of the calcium oxalate cluster crystals (COCCs), important secondary metabolites that accumulate in ginseng, are revealed by the three-dimensional quantitative imaging method. The volume and amount of the COCCs in different species of the ginseng are obtained by a quantitative analysis of the three-dimensional microstructures, which shows obvious difference among the four species of ginseng. Conclusion: This study is the first to provide evidence of the distribution characteristics of COCCs to identify four types of ginseng, with regard to species authentication and age identification, by X-ray phase-contrast microtomography quantitative imaging. This method is also expected to reveal important relationships between COCCs and the occurrence of the effective medicinal components of ginseng.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.655-669
• /
• 1995

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus is very important. In this study, amalgam 0 cavity was prepared on maxillary first premolar. Two dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2, 2/3 of intercuspal distance) were varied. Three or four-nodal mesh were used for the two dimensional finite element models. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. 1S model was sound tooth with no amalgam cavity. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed von Mises stress, 1 and 2 directional normal stress and Y and Z axis translation with FEM software Super SAPII Version 5.2 (Algor Interactive System Co.) and hardware 486 DX2 PC. The results were as :follows : 1. 1S model was slightly different with 1B model in stress distibution. 1S, 2B, 3B, 4B models showed similiar stress distribution. 2. 1S model and four B models showed similiar pattern in Y axis and Z axis translation. 3. 1S model and four B models showed the bending phenomenon in the translation. 4. As increasing of the width of the cavity, experimental group was similiar with the control group in stress distribution. 5. As increasing of the width of the cavity, experimental group was similiar with the control group in Y and Z axis tranlation.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.562-568
• /
• 2008

A novel two-dimensional cadmium(II)-nickel(II) bimetallic host clathrate, $[Cd{NH_2CH_2CH_2OH}_2Ni(CN)_4]{\cdot}3C_6H_5NH_2{\cdot}H_2O$, 1, has been synthesized and structurally characterized by X-ray single crystallographic method. The clathrate 1 crystallizes in the monoclinic system, space group $P2_1/c$ with a = 14.370(3), b = 7.728(1), c = 28.172(4) ${\AA}$, ${\beta}=97.58(1)^{\circ}$, V = 3101.1(9) ${\AA}^3$, Z = 4. The host framework of the clathrate 1 is built of the cyanide bridges between octahedral Cd(II) atom and square planar Ni(II) atom. The octahedral Cd atoms ligated by two 2-aminoethanol molecules and four cyanide ligands bridged with square planar Ni atoms. The Ni atoms bridges to four Cd atoms via cyanides is made up of puckered quadrangles of composition $\{CdNi(CN)_2\}_2$, all edges are shared. This cyanide bridges form an infinite two-dimensional host networks stacking along b axis. 2-Aminoethanol ligands bond to Cd atom through N atom as a monodentate ligand in the axial position and four cyanides take an equatorial plane with all in trans-configurations. The aniline guest molecules and water molecules are located in between the host layer sheets, respectively.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.56-66
• /
• 2010

This study proposes a thesis of architectural concepts and visual dimension systems, and the comparison between steps of spatial formation and dimensional alteration. The second chapter, to form the basis of this study, explains the dimensional alterations and changes of fundamental notion of space. In the third chapter, history of space, architectural formations, and changes of the viewpoint are analyzed as objects of study. The forth chapter presents the interrelation between dimensional alteration and the transition in fundamental notion of space, demonstrating that modern architecture has been born from these cultural movements. Lastly, the fifth chapter suggests possibilities on further studies and the following conclusions: First, architectural spaces have been changed, in accordance with the changes of culture, art and the tools that regulate architectural design. Proportional regulations by two-dimensional tools and depth through three-dimensional drawings are created. Second, architectural spaces gained depth by recognizing movement and time that have induced formations to change, creating various aesthetic backgrounds and attempts. Third, the aesthetic background and cosmologic spatial concept have led the visualization and changes of architectural experience. It created the design tools and shapes originated in dynamism and vitality. Forth, diversification of fundamental spatial concepts has become palimpsest and complex, and been divided into four dimensions; expressional two-dimensional space, perspective three-dimensional space, forth-dimensional space of time and experience, and imagery space formed by body movement. Fifth, architecture has been influenced by the elevated viewpoint that understands the whole world as a space. It has evolved from the two-dimensional proportion principle, change of depth and vanishing point to multidimensional space of movement and time. Sixth, changes of fundamental notion of space have arisen from changes of visual dimensions in times. In other words, space has been developed from two-dimensional space to multidimensional space by accepting visual dimension, grasping distance, direction, depth, height, velocity, movement, gravity, power and structure.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.460-467
• /
• 2015

PURPOSE. The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. MATERIALS AND METHODS. Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For two-dimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. RESULTS. In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (P<.05). In three-dimensional analysis, the biggest difference was seen between intraoral scanning and dual-arch impression and the smallest difference was seen between dual-arch and full-arch impression. CONCLUSION. The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P<.05). The second premolar showed significantly bigger three-dimensional deviations than the second molar in the three-dimensional deviations (P>.05).

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.65-72
• /
• 2001

The design of multi-stage gear drives is a time-consuming process, since on includes more complicated problems, which are not considered in the design of single-stage gear drives. The designer has th determine the number of reduction stages and the gear ratios of each reduction state. In addition, the design problems include not only the dimensional design but also the configuration design of gear drive elements. There is no definite rule and principle for these types of design problems. Thus the design practices largely depend on the sense and the experiences of the designer , and consequently result in undesirable design solution. We propose a new generalized design algorithm to support the designer at the preliminary design phase of multi-stage gear drives. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. The algorithm consists of four steps. In the first step, a designer determines the number of reduction stage. In the second step. gear ratios se chosen by using the random search method. In the third step, the values of basic design parameter are chosen by using the generate and test method. Then, the values of other dimension, such ad pitch diameter, outer diameter, and face width, are calculated for the configuration design in the final step. The strength and durability of a gear is guaranteed by the bending strength and the pitting resistance rating practices by using the AGMA rating formulas. In the final step, the configuration design is carried out b using the simulated annealing algorithm. The positions of gears and shafts are determined to minimize the geometrical volume(size) of a gearbox, while satisfying spatial constraints between them. These steps are carried out iteratively until a desirable solution is acquired. The propose design algorithm has been applied to the preliminary design of four-stage gear drives in order to validate the availability. The design solution have shown considerably good results in both aspects of the dimensional and the configuration design.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.375-384
• /
• 2005

Most of data objects in the real world have spatial and temporal information simultaneously. One of the objectives of spatiotemporal databases is to provide a very expressive framework for spatiotemporal database applications. The object oriented spatiotemporal model can manage spatiotemporal data efficiently because the model is able to store the complete history of any objects. Therefore, in order to handle the spatiotemporal data in object oriented fashion, we proposed a low dimensional spatiotemporal model in the object oriented fashion that extended dimensionally two dimensional spatial model of OpenGIS to fit into the real world information and to include temporal information. In order to proof the proposed model, we design a data provider component which consists of the data source, the session, the command, and the rowset component, and implement it. The proposed four dimensional spatiotemporal data model and provider in the object oriented fashion can be used to store, retrieve and manage the object oriented spatiotemporal data.

• Journal of Periodontal and Implant Science
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2007

This study evaluated the possibility of the 3-dimensional attachment of human periodontal ligament fibroblasts to a periodntally involved root surface after an EDTA treatment in vitro. The human PDL fibroblasts were isolated from the middle third of the root of periodontally healthy teeth extracted for orthodontic reasons. The cells were cultured in a medium containing Dulbecco's modified Eagle medium supplemented with 10% fetal bovine serum at $37^{\circ}C$ in humidified air containing 5% $CO_2$. Eight single-rooted teeth were obtained from patients diagnosed with periodotitis. After scaling and root planing, four teeth were etched with 24% ethylenediaminetetracetic acid (EDTA) for two minutes (Experimental group). The other four teeth were not treated with EDTA and were used as the control group. The human PDL fibroblasts were placed in the total root surface and cultured for 4 weeks. The teeth were fixed in 2.5% glutaraldehyde in PBS before preparation for the scanning electron microscopy (SEM) examination. The human PDL fibroblasts showed a healthy morphology on the root surfaces treated with EDTA (Experimental group) and a relatively unhealthy appearance on the treated root surfaces (Control group). This suggests that EDTA favorably affects the 3-dimensional attachment of human PDL fibroblasts cultured on the root surfaces. which may play an important role in periodontal healing and regeneration.

• Journal of the Korean Geographical Society
• /
• v.41 no.2 s.113
• /
• pp.227-243
• /
• 2006

This paper reviews how electronic media technologies involve and produce time-space dimensions in geometrical spaces, focusing on four theoretical perspectives: van Dijk's dual structure of networks as scale extension and reduction; Latour's actor-networks as fluid and hybrid networks; Virilio's dromospherical time as global media vectors; and Castells' timeless time as non-sequential flows. In these four theoretical perspectives, we can see that electronic media technologies involve different and multiple time-space dimensions in geometrical media spaces: from the two-dimensional spaces (surfaces) of concentric circles, through the one-dimensional spaces (lines) of actor-networks to the zero-dimensional spaces (points) of dromospherical time and finally to the multi-dimensional spaces (hypertexts) of timeless time. The paper concludes by suggesting that we need to explain electronic media spaces not only in terms of geometrical media spaces but also in terms of geographical media spaces in order to understand the ways in which electronic media spaces are dis/embedded in geographical spaces.

• The korean journal of orthodontics
• /
• v.49 no.4
• /
• pp.222-234
• /
• 2019

Objective: To investigate the three-dimensional lip vermilion changes after extraction and non-extraction orthodontic treatment in female adult patients and explore the correlation between lip vermilion changes and incisor changes. Methods: Forty-seven young female adult patients were enrolled in this study (skeletal Class III patients were excluded), including 34 lip-protruding patients treated by extraction of four first premolars (18 patients requiring mini-implants for maximum anchorage control and 16 patients without mini-implants) and 13 patients requiring non-extraction treatment. Nine angles, seven distances, and the surface area of the lip vermilion were measured by using pre- and post-treatment three-dimensional facial scans. Linear and angular measurements of incisors were performed on lateral cephalograms. Results: There were no significant changes in the vermilion measurements in the non-extraction group. The vermilion angle, vermilion height, central bow angle, height/width ratio, and vermilion surface area decreased significantly after the orthodontic treatment in the extraction groups, but the upper/lower vermilion proportion remained unchanged. Significant correlations were found between the changes in incisor position and those in vermilion angles, vermilion height, and surface area. Conclusions: Extraction of the four first premolars probably produced an aesthetic improvement in lip vermilion morphology. However, the upper/lower vermilion proportion remained unchanged. The variations in the vermilion were closely related to incisor changes, especially the upper incisor inclination changes.