• 제목/요약/키워드: four-cycles

검색결과 421건 처리시간 0.023초

배란유도주기에 따른 초음파검사와 기초체온표의 비교분석 (A Comparative Analysis of Basal Body Temperature to Ultrasound, as a Method of Ovulation Detection in Induced Ovulatory Menstrual Cycles)

  • 최욱;서병희;이재현
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제12권2호
    • /
    • pp.25-37
    • /
    • 1985
  • Four points on the basal body temperature (B.B.T.) curve was correlated with the estimated time of ovulation, as determined by serial ultrasound in 50 induced menstrual cycles from 22 subjects. The time of ovulation was estimated by measuring the maximal diameter of follicles and observing the morphologic changes within the ovary from follicle to corpus luteum. The results were as following; 1. The diameter of the follicle measured at the day before disappearance was 21.1 mm on an average (S.D.: 2.14). The average follicular growth for 4 days before ovulation was measured at a rate of 2.8 mm/day, and rapid growth of follicle was observed 3.1 mm/day at the day before. 2. The changes associated with rupture of the follicles were the followings, in order of frequency; decrease in size(94%), disappearance of follicles(64%), fluid in the Cul-de-Sac(26%) and increased internal echoes(16%). 3. Only 20 of 50 cycles, exhibited a BBT dip and correlated with the estimated time of ovulation by ultrasound in 2 of which cases(10%). BBT nadir, 30 of 50 cycles, correlated in 5(16.7%). The first day of hyperthermic plateau(FDHP) and BBT coverline was exhibited in all cycles, correlated in 41(82%) and 35(70%) cases. 4. The relationship between the diameter of dominant dominant follicle, measured by ultrasound, and the basal body temperature curve were as following. During cycles in which dip was observed on the BBT curve, the follicular diameter were 10.5${\pm}$2.12 mm on 4 days prior to the point (D-4), and 12.5${\pm}$2.12 mm (D-3), 15.5${\pm$2.12 mm (D-2), 17.0${\pm}$1.41 mm (D-1) and 21.5${\pm}$2.12 mm just prior to the dip (D-0). In the nadir; 9.6${\pm}$1.67 mm (N-4), 12.8${\pm}$1.79 mm (N-3), 16.2${\pm}$1.92 mm (N-2), 18.2${\pm}$2.17 mm (N-1) and 21.4${\pm}$2.61 mm (N-0). In the First day of Hyperthemic Plateau (FDHP); 9.8${\pm}$1.36 mm (F-4), 12.4${\pm}$1.41 mm (F-3),15.1${\pm}$1.57 mm (F-2), 18.1${\pm}$1.67 mm (F-1) and 21.2${\pm}$2.25 mm (F-0). In the BBT coverline endopint; 9.9${\pm}$.39 mm (C-4), 12.5 ${\pm}$1.44 mm (C-3), 15.2${\pm}$1.64 mm (C-2), 18.0 ${\pm}$1.69 mm (C-1), and 21.2${\pm}$2.31 mm (C-0). 5. The relationship between the ultrasonographic signs of ovulation and the basal body temperature curve were as following. The BBT dip correlated with the ovulation in 2 cases, which revealed decrease in follicular diameter (100%), fluid pattem in the Cul-de-Sac (1 case, 50%) and complete disappearance of follicle (1 case, 50%). In the nadir (5 cases); the ultrasonographic signs of ovulation were decrease in follicular diameter (5 cases, 100%), fluid pattern in the Cul-de-Sac (1 case, 20%) and complete disappearance of follicle (3 cases, 60%). In the First day of Hyperthermic Plateau (41 cases); decrease in follicular diameter (40 cases, 97.6%), fluid pattern in the Cul-de-Sac (11 cases, 26.8%), appearance of internal echo and thickening of the wall (6 cases, 14.6%) and com plete disappearance of follicle (28 cases, 68.3%). In the BBT coverline endpoint (35 cases); decrease in follicular diameter (33 cases, 94.3%), fluid pattern in the Cul-de Sac (9 cases, 25.7%), appearance of internal echo and thickening of the wall (5 cases 14.3%) and complete disappearance of follicle (20 cases, 57.1%).

  • PDF

우레탄 폼 코아 샌드위치 구조물의 피로특성에 미치는 스티칭 사의 영향 (Effects of Stitching Thread on Fatigue Characteristics of Polyurethane foam Cored Sandwich Structure)

  • 김재훈;이영신;박병준;김영기;김덕회
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2000년도 춘계학술발표대회 논문집
    • /
    • pp.71-75
    • /
    • 2000
  • The effects of stitching thread on fatigue characteristics of polyurethane foam cored sandwich structures are investigated. Fatigue test and static test, being used in four point bending test, are performed with various diameters and distances of stitching thread. The Results show that the maximum load for bending tests is similar to each other, but after $1O^6$ fatigue cycles, the stiffness degradation of the stitching thread diameter $\emptyset$ 3mm specimen is a much larger than that of the $\emptyset$ 5mm specimen.

  • PDF

제올라이트의 아황산가스흡 ${\cdot}$ 탈착특성 (Adsorption characteristics of the zeolite for flue gas desulfurization)

  • 박현희;모세영
    • 환경위생공학
    • /
    • 제18권3호통권49호
    • /
    • pp.43-47
    • /
    • 2003
  • The desorption characteristics of NaY zeolite, of which Si/Al ratio is 2.36, was measured at 25${\circ}$C and 150${\circ}$C so as to be used practically as a adsorbent for separation of sulfur oxides from flue gas, for which adsorption and desorption cycles at 25${\circ}$C were repeated four times and that at 150${\circ}$C was done one time. As a result it took 30.8 at 150${\circ}$C and 164.1 minutes in average at 25${\circ}$C to reach equilibrium condition. It means that regeneration of the NaY zeolite can be done below 150${\circ}$C so that zeolite can be used for flue gas desulfurization.

가족생활주기별 아파트 단위주호 계획요소 선호분석 (An Analysis of the Preferential Unit Planning Components of High-rise Residential Buildings Across Family Life Cycle Stages)

  • 이연숙;이현정;이지영
    • 한국실내디자인학회논문집
    • /
    • 제14권2호
    • /
    • pp.120-127
    • /
    • 2005
  • The purpose of this study was to examine preferential unit planning components of high-rise residential buildings across family life cycle stages. The questionnaire survey was adopted in this study, and 110 cases were used for data analysis. Based on the age of the oldest child, the family life cycles used in the study were divided into four stages: early childhood, elementary school, adolescence, and adulthood. The findings showed that the preference of the unit planning components across the stages was distinct; families in the stage of early childhood and adolescence had the growing needs for spatial features, and regarded living-related features as important. Families in the stage of adulthood tended to have larger spaces. It was noticed that unit planning components needed to be more differential when the combined effect of both family life cycle stages and housing size was considered.

PROFITABILITY AND SUSTAINABILITY OF A TOURISM-BASED SOCIAL-ECOLOGICAL DYNAMICAL SYSTEM BY BIFURCATION ANALYSIS

  • Afsharnezhad, Zahra;Dadi, Zohreh;Monfared, Zahra
    • 대한수학회지
    • /
    • 제54권1호
    • /
    • pp.1-16
    • /
    • 2017
  • In this paper we study a four dimensional tourism-based social-ecological dynamical system. In fact we analyse tourism profitability, compatibility and sustainability by using bifurcation theory in terms of structural properties of attractors of system. For this purpose first we transformed it into a three dimensional system such that the reduced system is the extended and modified model of the previous three dimensional models suggested for tourism with the same dimension. Then we investigate transcritical, pitchfork and saddle-node bifurcation points of system. And numerically by finding some branches of stable equilibria for system show the profitability of tourism industry. Then by determining the Hopf bifurcation points of system we find a family of stable attractors for that by numerical techniques. Finally we conclude the existence of these stable limit cycles implies profitability and compatibility and then the sustainability of tourism.

304 스테인레스강 용접부 잔류응력에 미치는 예열 효과의 유한요속 해석 (Finite Element Analysis of Effect of Preheating on the Residual Stress in 304 Stainless Steel Weldment)

  • 장경복;김하근;강성수
    • Journal of Welding and Joining
    • /
    • 제16권5호
    • /
    • pp.67-75
    • /
    • 1998
  • This study aimed at he experimental and finite element analytic investigation of the effect of preheating on he residual stress of weldment. In this study, an autogenous arc welding was used on type 304 stainless steel and MARC as F.E.M. common code was utilized in analysis The analyses include transient and moving heat source and thermal properties as function of temperature. During welding, the thermal cycles of four locations in the weldment were recorded to investigate of the behavior of thermal stress and residual stress. The experimental and analytic results had good coincidence and show that there are two factors influencing the formation of welding residual stress in preheat process. One is the elevation of welding equilibrium temperature and the other is the increase of amount of heat input. The former decrease welding residual stress and the latter increase welding residual stress. Therefore, the cumulative effects result in the welding residual stress not being improved significantly with preheating in 304 stainless steel.

  • PDF

Life Cycle Assessment(LCA)를 도입(導入)한 오니처리(汚泥處理)시스템의 평가(評價) (Life Cycle Assessment (LCA) on Sludge Treatment System)

  • 황용우;권봉기;유성호
    • 상하수도학회지
    • /
    • 제11권2호
    • /
    • pp.50-64
    • /
    • 1997
  • Life cycle assessment (LCA) on total sewage sludge treatment system from thickening to incineration and melting was performed for estimating global environmental impact as $CO_2$. In general, the life cycles of actual treatment facilities consist of construction, operation and dismantlement. In this study, the amount of $CO_2$ produced from both whole and each life cycle step of currently used unit sludge treatment processes were calculated by inventory analysis. In addition, in the all processes investigated in this study, individual $CO_2$ production unit (CPU), i.e. total produced $CO_2$ by treating a unit weight of sludge was also calculated. By using the CPU matrix of the unit processes, it was possible to simulate the $CO_2$ production for any type of complex-system as well as to trace a dominant cause of $CO_2$ production in each process. Four selected alternatives examined here, each involve the same disposal way but differ substantially in the $CO_2$ exhaust.

  • PDF

An effective method for improving outcomes in patients with a fertilization defect

  • Yoon, Hye Jin;Kim, Hyung Jun;Bae, In Hee;Chae, Soo Jin;Yoon, San Hyun;Lee, Won Don;Lim, Jin Ho
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제41권3호
    • /
    • pp.137-139
    • /
    • 2014
  • The effect of artificial oocyte activation (AOA) with a calcium ionophore on intracytoplasmic morphologically selected sperm injection (IMSI) was examined in patients with histories of repeated failed implantation attempts. Four singleton pregnancies and one twin pregnancy were obtained after embryos transfer (5/14, 35.7%). Therefore, AOA combined with IMSI can be considered an option for cycles with a fertilization defect and recurrent implantation failures.

Update on the Evidence Regarding Maintenance Therapy

  • Lee, Jeong Eun;Chung, Chae-Uk
    • Tuberculosis and Respiratory Diseases
    • /
    • 제76권1호
    • /
    • pp.1-7
    • /
    • 2014
  • Maintenance therapy has emerged as a novel therapeutic paradigm for advanced non-small-cell lung cancer (NSCLC). Maintenance therapy that aims to sustain a clinically favorable state after first-line chemotherapy has two strategies. Switch maintenance therapy entails switching to a new and non-cross-resistant agent in an alternating or sequential manner, on completion of first-line chemotherapy. Continuous maintenance therapy keeps ongoing administration of a component of the current regimen after four to six cycles of chemotherapy, if there is a stable disease, or better response. Both maintenance therapies can be continued, until disease progression. The potential evidence regarding maintenance therapy includes providing the opportunity to receive additional treatment, through sustaining tumor shrinkage, and delayed emergence of tumor-related symptom. Thus far, debates over the parameters used to predict the effectiveness of maintenance therapy, financial burden, and uncertainty of improving the quality of life exist. Despite many debates, maintenance therapy, which is currently recommended, has been disclosed to be beneficial.

TETRA RM 부호의 복호 알고리즘 비교 (Decoding Performance and Complexity of Reed-Muller Codes in TETRA)

  • 박기윤;김대호;오왕록
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 추계학술대회
    • /
    • pp.162-164
    • /
    • 2010
  • TETRA (Terrestrial trunked radio) 표준은 제어정보의 오류정정을 위해 RM (Reed-Muller) 부호를 채택하고 있다. 본 논문에서는 BP (belief propagation), MJ (majority logic decoding) 등과 같이 잘 알려진 복호 알고리즘들을 적용하였을 경우 기대되는 비트 및 블록 오류율을 평가하고 복호 복잡도를 분석하고자 한다.

  • PDF