• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.159-178
• /
• 2012

Recently, Global network expansion strategy of GTOs(Global Terminal Operator) coupled with each country's port policy, plays huge role for the evolution of modern container port. The Chinese ports can be regarded as the major markets to the GTOs. However, there are scant of researches for finding the key success factors of GTOs' strategies when they consider to invest in overseas. In this respect, the aims of this study were to draw out the evaluation variables for successful investment strategies of GTOs, and to calculate the selected target ports. The 14 variables are selected including the variable named 'development potentiality of a port' through literature reviews. Using the Factor Analysis (FA) based on selected variables, four principal factors were extracted such as 'ability for port operating and cargo generating', 'the trade route and volume', 'the calling potentiality for large vessels' and 'the possibility of utilization of existing infrastructure'. In addition, the weights of factors and variables are evaluated through Fuzzy AHP method. As a result, 'ability for port operating and cargo generating' is chosen as the most important factor among principal factors as scored 0.343, and 'the development potentiality of a port' (0.107) is represented as the most important variable among 14 detailed variables. In overall, from the Global Terminal Operator's point of view, Shanghai is ranked as most suitable port for operating new terminal among the top 5 Chinese ports.

• Korean Journal of Materials Research
• /
• v.17 no.8
• /
• pp.447-451
• /
• 2007

We investigated the dependence of the various annealing conditions and thickness ($6\sim45nm$) of the Ti-doped $Al_2O_3$ coating on the electrochemical properties and the capacity fading of Ti-doped $Al_2O_3$ coated $LiCoO_2$ films. The Ti-doped-$Al_2O_3$-coating layer and the cathode films were deposited on $Al_2O_3$ plate substrates by RF-magnetron sputter. Microstructural and electrochemical properties of Ti-doped-$Al_2O_3$-coated $LiCoO_2$ films were investigated by transmission electron microscopy (TEM) and a dc four-point probe method, respectively. The cycling performance of Ti-doped $Al_2O_3$ coated $LiCoO_2$ film was improved at higher cut-off voltage. But it has different electrochemical properties with various annealing conditions. They were related on the microstructure, surface morphology and the interface condition. Suppression of Li-ion migration is dominant at the coating thickness >24.nm during charge/discharge processes. It is due to the electrochemically passive nature of the Ti-doped $Al_2O_3$ films. The sample be made up of Ti-doped $Al_2O_3$ coated on annealed $LiCoO_2$ film with additional annealing at $400^{\circ}C$ had good adhesion between coating layer and cathode films. This sample showed the best capacity retention of $\sim92%$ with a charge cut off of 4.5 V after 50 cycles. The Ti-doped $Al_2O_3$ film was an amorphous phase and it has a higher electrical conductivity than that of the $Al_2O_3$ film. Therefore, the Ti-doped $Al_2O_3$ coated improved the cycle performance and the capacity retention at high voltage (4.5 V) of $LiCoO_2$ films.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.271-280
• /
• 2017

This study presents the application of satellite laser ranging (SLR) to orbit determination (OD) of high-Earth-orbit (HEO) satellites. Two HEO satellites are considered: the Quasi-Zenith Satellite-1 (QZS-1), a Japanese elliptical-inclinedgeosynchronous-orbit (EIGSO) satellite, and the Compass-G1, a Chinese geostationary-orbit (GEO) satellite. One week of normal point (NP) data were collected for each satellite to perform the OD based on the batch least-square process. Five SLR tracking stations successfully obtained 374 NPs for QZS-1 in eight days, whereas only two ground tracking stations could track Compass-G1, yielding 68 NPs in ten days. Two types of station bias estimation and a station data weighting strategy were utilized for the OD of QZS-1. The post-fit root-mean-square (RMS) residuals of the two week-long arcs were 11.98 cm and 10.77 cm when estimating the biases once in an arc (MBIAS). These residuals were decreased significantly to 2.40 cm and 3.60 cm by estimating the biases every pass (PBIAS). Then, the resultant OD precision was evaluated by the orbit overlap method, yielding three-dimensional errors of 55.013 m with MBIAS and 1.962 m with PBIAS for the overlap period of six days. For the OD of Compass-G1, no station weighting strategy was applied, and only MBIAS was utilized due to the lack of NPs. The post-fit RMS residuals of OD were 8.81 cm and 12.00 cm with 49 NPs and 47 NPs, respectively, and the corresponding threedimensional orbit overlap error for four days was 160.564 m. These results indicate that the amount of SLR tracking data is critical for obtaining precise OD of HEO satellites using SLR because additional parameters, such as station bias, are available for estimation with sufficient tracking data. Furthermore, the stand-alone SLR-based orbit solution is consistently attainable for HEO satellites if a target satellite is continuously trackable for a specific period.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.39-49
• /
• 1986

The purpose of this study was to observe characteristic properties through the polarization curves and SEM images from 4 different types of amalgam obtained by using the potentiostats (Princeton EG & G) & SEM (Jeol/35), and to investigate the degree of corrosion on the oxidation peak of the each phase of amalgam. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of the mechanical amalgamator (Shofu Co.), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10.0mm in height and was condensed by using routine manner. The specimen was removed from the mold and stored at room temperature for about 24 hours. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to confirm the corrosion behaviour of the amalgams in a 0.9% saline solution (P.H: 6.8-7.0) at $37^{\circ}C$. The initial rest potential (corrosion potential) was determined after 30 minutes of immersion of specimen in electrolyte, and the potential scan was begun at the point of 100mV cathodic from the corrosion potential. The scan rate was 0.17mV/sec. in the study to observe the degree of corrosion of each phase. SEI and EPMA images on the determined oxidation peaks of each amalgam were observed. The results were as follows: 1. In the four anodic polarization curves, low copper amalgams have three oxidation peaks and high copper amalgams have two oxidation peaks, -270mV, +26mV and +179mV(SEC) in the low copper lathe cut, and -300mV, +39mV and +163mV(SEC) in the low copper spherical. -4mV and +154mV(SEC) in the Dispersalloy, and +17mV and +180mV(SEC) in the Tytin as high copper amalgams. 2. ${\gamma}_2$ phase in the low copper amalgam and ${\eta}$ phase in the high copper amalgam were the most corrodible phases and Ag-Cu eutectic in high copper amalgam was the most slowly corroded phase. 3. Low copper amalgam was more susceptible in corrosion than high copper amalgam.

• Korean Journal of Plant Taxonomy
• /
• v.35 no.4
• /
• pp.273-285
• /
• 2005

Genetic variation of notorious invasive plants, common ragweed (Ambrosia artemisiifolia L.) and giant ragweed (Ambrosia trifida L.) were examined using the internal transcribed spacer (ITS) sequences of nuclear ribosomal DNA. A total of 18 different ITS types were detected from 156 individuals of common ragweed sampled mainly from the southern part of Korean peninsula whereas four types were identified from 46 individuals of giant ragweed. High sequence diversity observed from common ragweed in Korean populations was interpreted as multiple introduction. Genetic recombination was suggested as possible method for the production of some of the ITS types while point mutation was mainly responsible for the origin of the sequence diversity. This study provided some of basic genetic information needed for understanding of the evolutionary process in ragweed during invasion.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.1
• /
• pp.33-38
• /
• 2007

We studied a bonding at low temperature using polymer bump and Non-Conductive Adhesive (NCA), and studied the reliability of the polymer bump/Al pad joints. The polymer bumps were formed on oxidized Si substrates by photolithography process, and the thin film metals were formed on the polymer bumps using DC magnetron sputtering. The substrate used was AL metallized glass. The polymer bump and Al metallized glass substrates were joined together at $80^{\circ}C$ under various pressure. Two NCAs were applied during joining. Thermal cycling test ($0^{\circ}C-55^{\circ}C$, cycle/30 min) was carried out up to 2000 cycles to evaluate the reliability of the joints. The bondability was evaluated by measuring the contact resistance of the joints through the four point probe method, and the joints were observed by Scanning Electron Microscope (SEM). The contact resistance of the joints was $70-90m{\Omega}$ before the reliability test. The joints of the polymer bump/Al pad were damaged by NCA filler particles under pressure above 200 MPa. After reliability test, some joints were electrically failed since thinner metal layers deposited at the edge of bumps were disconnected.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.199-208
• /
• 2010

In order to substitute FRP bar for steel bar in new structures, it is necessary to establish a reliable design code. But relatively little research has been conducted on the material in Korea. So, a total of 22 beam specimens (18 GFRP reinforced concrete and 4 conventional steel reinforced concrete) were constructed and tested. In the first phase of the experiment, it was carried out to observe flexural behavior, and collect deflection and crack data. In order to eliminate of the uncertainty by the shear reinforcements and induce flexural failure mode, any stirrup were not used and only shear span-depth ratio were adjusted. However, almost beams were broken by shear and the ACI 440.1R, CSA S806, which were used to design test beams, showed considerable deviation between prediction and test results of shear strengths. Therefore in the second phase of the study, shear failure modes and behavior were observed. A standard specimen had dimensions of 3,300 mm long ${\times}$ 800 mm wide ${\times}$ 200 mm effective depth. Clear span and shear span were 2,800 mm, 1,200 mm respectively. Control shear span-depth ratio was 6.0. Four-point bending test over simple support was conducted. Variables of the specimens were concrete compressive strength, type and elastic modulus of reinforcement, shear span-depth ratio, effective reinforcement ratio, the effect of bundle placing method and cover thickness.

• Journal of Korean Academy of Nursing
• /
• v.28 no.1
• /
• pp.81-92
• /
• 1998

This study is to define the caring experience of mothers with insulin-dependent diabetes mellitus children, by finding core category, contextual factors, ntervening factors, and the patterns of caring, and to velop a practice theory on it. Research method followed grounded theory methodology by Strauss & Corbin. Subjects were six mothers. whose children have had insulin-dependent diabetes mellitus for 4 months to 14 years by the interview time. They were selected by theoretical sampling. Data were collected from September, 1995 to January, 1996. Interview were done by long interview technique and observation. Each interview took 50 minutes to 2 hours. Content of interview was recorded and transcribed later. Based on the results of previous interview, content of next interview was planned until data reached to the saturation point. Results were as follows : One hundred and forty concepts were found. These concepts were grouped into thirty-three categories, and then to ten categories. Mothers with diabetic child were revealed to face “being overwhelmed by burden”. Overwhelming by burden is found to be progressed through the cycle production-coping-decrease or in crease process. Mothers showed four patterns of adaptation in caring the diabetic children. 1) If mothers felt large amount of overwhelming by burden because of difficulty of caring and unsympathizing but they had sufficient support, no condition of the child, and their coping mechanism was positive, most of them overcome with strong will, but some fell into burnout. 2) If mothers felt large amount of overwhelming by burden because of difficulty of caring, unsympathizing, insufficient support. serious condition of the child, and their coping mechanism was negative, they fell into burnout by coping with feeling. 3) If mothers felt small amount of overwhelming by burden because of little difficulty of caring and sympathizing, sufficient support. no serious condition of the child, but their coping was negative, most of them fell into burnout by coping with feeling, but some overcome. 4) If mothers felt small amount of overwhelming by burden because of little difficulty of caring and unsympathizing, sufficient support, no serious condition of the child, and their coping was positive, they overcome with strong will. On the basis of the above result, in order to help mothers take good care of their children, nursing assesment and intervention on life readjustment, and getting support should be required. Especially, through understanding mothers' personalities, individual support consistent with each of them should be required. Therefore education. counseling, mutual support and exchange of information will have to be accomplished.

• Journal of the Korean Chemical Society
• /
• v.64 no.5
• /
• pp.304-317
• /
• 2020

This study was conducted on four 11^th grade students at a high school in a small town to determine the effectiveness of responsive teaching. The three phases of the responsive teaching method proposed in the previous study were subdivided into six stages; Step 1 is elicitation of students' thoughts related to macroscopic world, Step 2 is drawing of students' early thoughts related to microscopic world, Step 3 is disciplinary connections with ideas of the particle, Step 4 is to clarify the learner's thoughts on the particle by the teacher's involvement, Step 5 is deepening students' thoughts, and Step 6 is expanding ideas. In Step 4, students came to the recognition that the cause of mass was atoms and that the cause of volume was molecules. In Step 5, students led to a shift in thinking that could ignore the volume of the molecules themselves through the properties of protons and neutrons that affect mass from a particle perspective. In the Step 6 of expanding ideas, students explained molecular motion by the concept of material point which ignores the volume of particles. This steps gave students perspectives on the relationship between the mass and volume of particles required by Avogadro's law. The students recognized that some systems could be studied only indirectly because they were too small, too large, too fast, or too slow to observe directly.

• Journal of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.33-37
• /
• 1961

We have shown that carboxy-peptidase destroys the biological activity of angiotensin octa-and deca-peptides. Since Proline occurs as the seventh amino acid from the amino end of the chain and since carboxypeptidase does not cleave proline from a peptid chain, it is evident that the heptapeptid H.asp-arg-val-tyr-ileu-his-pro.OH is formed by this hydrolysis. This peptide must then be biologically inactive. In order to determine whether the phenyl group of the C-terminal amino acid was the necessary requirement for biological activity of the octapeptide, $ala^8$ angiotensin octapeptide(amino acids of peptides numbered from amino end) was synthesized. For this synthesis the four dipeptides were prepared: carbobenzoxy-L-prolyl-L-alanine-P-nitrobenzyl-ester, m.p. $134-135^{\circ}C,$ carbobenzoxy-L-isoleucyl-imidazole benzyl-L-histidine methyl ester, m.p. $114-116^{\circ}C,$ carbobenzoxy-L-valyl-L-tyrosine hydrazide and carbobenzoxy B-benzyl-L-aspartyl-nitro-L-arginine. The first three dipeptides were obtained as crystalline compounds. Imidazole-benzyl-L-histidine was used in the hope that it would block the histidine imidazole against side reactions in steps subsequent to the formation of the C-terminal tetrapeptide. Also, it was through that the imidazole benzylated peptides would be easier to crystallize. This, however, was not the case. The tetrapeptide, carbobenzoxy-L-isoleucyl-L-im, benzyl-histidyl, L-prolyl-L-alanine-nitrobenzyl ester was not obtained in a crystalline form. Neither could the mono-or dihydrobromide of the tetrapeptide free base be induced to crystallize. Carbobenzoxy-L-valyl-L-tyrosine azide was condensed with the tetrapeptide free base to yield the protected hexapeptide; carbobenzoxy-L-valyl-L-tyrosyl-L-isoleucyl-L-im, benzyl, histidyl-L-Prolyl-L-alanine-nitrobenzyl ester. Upon removal of the carbobenzoxy group with hydrogen bromide in acetic acid an amorphous free base hexapeptide ester was obtained. This compound gave the correct C, H, N analysis and contained the six amino acids in the correct ratio. The octapeptide was obtained by condensing this hexapeptide with carbobenzoxy-B-benzyl-L-aspartyl-nitro, L-arginine using the mixed anhydride method of condensation. This amorphous product was proven to be homogenous by chromatography in two solvent systems and upon hydrolysis yielded the eight amino acids in correct ratio. The five protecting groups were removed from the octapeptide by hydrogenolysis over palladium black catalyst. Biological assay of the free peptide indicated that it possessed less than 0.1 per cent of both pressor and oxytocic activity of the phenylalanine8 angiotensin. This suggests that the phenyl group is a point of attachment between angiotensin and its biological receptor site.