• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.86-93
• /
• 2020

The demand for maintenance in Korea infrastructure facilities constructed since the 1970s has increased significantly compared to the demand for new construction. Moreover, after the Gyeongju and Pohang earthquakes, seismic performance evaluation, repair, and retrofitting projects have been carried out. Therefore, in this study, a specimen was designed following the L-type GFRP Plate Externally Bonded Retrofit method, one among other retrofit methods. The L-type GFRP Plate was bonded to the specimen by epoxy and a washered steel nail. A four-point bending test was performed to confirm the strengthening effect of the Externally Bonded Retrofit method using an L-type GFRP Plate. The strengthening effect of the L-type GFRP plate was proven experimentally, and the behavior of the beam designed following the L-type GFRP Plate Externally Bonded Retrofit method was evaluated according to Korea's "Design Manual & Specification for Strengthening of RC Structures by Advanced Composites System". Furthermore, the effectiveness of the bonding method, a combination of epoxy and washered steel nail, was also checked. The results showed that the design, according to the guidelines mentioned above, predicted the strength of the member well, but the failure mode did not satisfy the design assumption because of unexpected damage to the GFRP plate due to the fixing method, washered steel nail.

• Korean Journal of Environmental Biology
• /
• v.37 no.1
• /
• pp.82-87
• /
• 2019

Global warming has a significant impact on diverse ecosystems including agroecosystem through; changing of phenology, physiology and distribution. Monitoring of biological responses emanating from global warming is required to understand the challenges of biological diversity conservation posed by climate change. The Korean government selected four butterfly species as indicators of climate change in agroecosystem: Papilio xuthus, Pieris rapae, Colias erate, and Eurema mandarina. The aim of this study was to investigate the different monitoring methods of the butterflies in Korea and suggest a suitable monitoring method to track the population trends of butterflies in the agroecosystem. Butterfly monitoring was conducted in eight sites throughout Korea from April to October, 2018 using three survey methods: point census at rice paddy area, point census at the border between rice paddy and hill and line transect along the rice paddy and hill. Each method took approximately 30 min. to count the butterflies. A total of 4,691 butterflies and 92 species were counted: The most dominant species was Pieris rapae with a total count of 1,205 individuals followed by Polygonia c-aureum, Zizeeria maha, Colias erate, Cupido argiades and Papilio xuthus. Among the three census methods, the total number of species and individuals when using line transect method was statistically higher than in the other methods. However, the numbers of the four butterflies indicators showed no difference throughout three census methods. Based on the number of species and the total individuals butterflies in agroecosystem, we advocate for the application of line transect method as it can find more butterflies in agroecosystem. In addition, we advised for the implementation of education programs on the line transect method in butterfly identification to participants of the national monitoring program.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.4
• /
• pp.756-764
• /
• 1998

The purpose of this study is to compare food habits of four institution(public boarding home, public mursing home, private boarding home, meal service in welfare center) in Pusan, Korea. Data were collected from 119 of were more than 65 years in the above institutions. Chi-square test was the main data analysis method. More than a quarter of the respondents(27%) showed fairly good level of activity, while a half of them(52.9%) answered the middle level. More than 80 percent of the respondents reported that their food attitude was "Good". There were more elderly women than elderly men among the four institutions. Although the four institutions have served snacks on the regular basis, they did not provide the residents with nutritious food. Most of the residents want to have snacks between meals, but they did not perfer candy. All the subjects didn't point out any particular problem of institution. They were accustomed with their old food served by their institution. As food perferences, almost all of the respondents preferred cooked rice and cooked rice with cereals. Only the residents of private boaring home liked cooked rice with red bean. In case of soup, all of residents liked any kind of soup. The most preferred most menu was beef. But only residents of private boarding home did not like pork. All residents like any all kind of kimchi except kimchi made by radish. In preference of cooking method of a side dish, seasoned food and vegetables were the most favorable menu by the respondents. Compared to the private home, the institutions give residents effective plan to prepare meals. Even though this study tried to find differences in attitudes of dietary life among the institutions, it could not find any meaningful difference among them. Korean elders in the institutions seem to have no proper that they do not have any proper sense of evaluating their dietary life.

• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.3
• /
• pp.415-427
• /
• 2003

Purpose: The purpose of this study was to investigate the degree and pattern of knowledge management process, and to identify the relationship between knowledge management process and organizational effectiveness in clinical nurses. Method: Participants were 665 regular clinical nurses who had worked for over 1 year in general units of 9 tertiary medical hospitals including 2 national university hospitals, 5 university hospitals, and 2 hospitals founded by business enterprises. Data were collected from March to May 2003 through questionnaires. Four structured instruments were used to collect the data: Knowledge Management Process Scale(Jeong, Lee, Lee, & Kim, 2003), cCommitment Questionnaire(Mowday, Steers, & Porter, 1979), General Satisfaction Scale(CooK, Hepworth, Wall, & Warr, 1981), and one for general characteristics. The data were analyzed using factor analysis, reliability analysis, descriptive analysis, cluster analysis, one-way ANOVA, Scheffe test, correlation analysis with the SPSS for Windows 10.0 program. Result: 1) The average score for knowledge management process in nurses was $3.08{\pm}.54$ on a 5-point Likert scale. In order from highest mean score, the elements of knowledge management process, were Knowledge $Utilization(3.35{\pm}.57)$, Knowledge $Sharing(3.07{\pm}.58)$, Knowledge $Creation(2.99{\pm}.63)$, and Knowledge $Storage(2.91{\pm}.82)$. 2) Four knowledge management patterns for nurses, which were derived from cluster analysis, were inactivate pattern, delayed pattern, activate pattern, and high-activate pattern of knowledge management. 3) The degree of knowledge management process activation and 4 elements of knowledge management process, Knowledge Creation, Knowledge Storage, Knowledge Sharing, and Knowledge Utilization, were significantly correlated with nurses' organizational commitment and job satisfaction(p=.000). 4) The nurses' organizational commitment and job satisfaction showed significant differences according to the knowledge management patterns derived from cluster analysis of high-activate pattern, activate pattern, delayed pattern, inactivate pattern(p=.000). Conclusion: These results suggest that there are four knowledge management patterns for nurses, and knowledge management process positively affects the nurses' organizational commitment and job satisfaction. From the above findings, knowledge management process is empirically verified as a useful and effective method to increase organizational effectiveness, and develop the organization.

• Computers and Concrete
• /
• v.16 no.5
• /
• pp.669-682
• /
• 2015

Degradation of reinforced concrete (RC) structures due to chloride penetration followed by reinforcement corrosion has been a serious problem in civil engineering for many years. The numerical simulation methods at present are mainly finite element method (FEM) and finite difference method (FDM), which are based on mesh. Mesh generation in engineering takes a long time. In the present article, the numerical solution of chloride transport in concrete is analyzed using radial point interpolation method (RPIM) and element-free Galerkin (EFG). They are all meshless methods. RPIM utilizes radial polynomial basis, whereas EFG uses the moving least-square approximation. A Galerkin weak form on global is used to attain the discrete equation, and four different numerical examples are presented. MQ function and appropriate parameters have been proposed in RPIM. Numerical simulation results are compared with those obtained from the finite element method (FEM) and analytical solutions. Two case of chloride transport in full saturated and unsaturated concrete are analyzed to test the practical applicability and performance of the RPIM and EFG. A good agreement is obtained among RPIM, EFG, and the experimental data. It indicates that RPIM and EFG are reliable meshless methods for prediction of chloride concentration in concrete structures.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.2
• /
• pp.62-72
• /
• 2023

Objective: Although balance training has been used as an effective ankle injury rehabilitation program to restore neuromuscular deficits in patients with chronic ankle instability, it is not effectively used in terms of motor learning. Attentional focusing can be an effective method for improving ankle kinematics to prevent recurrent ankle injuries. This study aimed to 1) evaluate the effects of attentional focus, including internal and external focus, and 2) determine a more effective focusing method for patients with chronic ankle instability to learn balance tasks. Method: Twenty-four patients with chronic ankle instability were randomly assigned to three groups (external focus, internal focus, and no feedback) and underwent four weeks of progressive balance training. The three-dimensional ankle kinematics of each patient were measured before and after training as the main outcomes. Ensemble curve analysis, discrete point analysis, and post hoc pairwise comparisons were performed to identify interactions between groups and time. Results: The results showed that (1) the external focus group was more dorsiflexed and everted than the internal focus group; (2) the external focus group was more dorsiflexed than the no feedback group; and (3) the no feedback group was more dorsiflexed than the internal focus group. Conclusion: Because dorsiflexion and eversion are ankle motions that oppose the mechanism of lateral ankle sprain, using the external focus method during balance training may be more effective in modifying these motions, thereby reducing the risk of ankle sprain.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.1
• /
• pp.43-49
• /
• 2018

PURPOSE. The purpose of this in vitro study is to examine the effects of a nano-structured alumina coating on the adhesion between resin cements and zirconia ceramics using a four-point bending test. MATERIALS AND METHODS. 100 pairs of zirconium bar specimens were prepared with dimensions of $25mm{\times}2mm{\times}5mm$ and cementation surfaces of $5mm{\times}2mm$. The samples were divided into 5 groups of 20 pairs each. The groups are as follows: Group I (C) - Control with no surface modification, Group II (APA) - airborne-particle-abrasion with $110{\mu}m$ high-purity aluminum oxide ($Al_2O_3$) particles, Group III (ROC) - airborne-particle-abrasion with $110{\mu}m$ silica modified aluminum oxide ($Al_2O_3+SiO_2$) particles, Group IV (TCS) - tribochemical silica coated with $Al_2O_3$ particles, and Group V (AlC) - nano alumina coating. The surface modifications were assessed on two samples selected from each group by atomic force microscopy and scanning electron microscopy. The samples were cemented with two different self-adhesive resin cements. The bending bond strength was evaluated by mechanical testing. RESULTS. According to the ANOVA results, surface treatments, different cement types, and their interactions were statistically significant (P<.05). The highest flexural bond strengths were obtained in nano-structured alumina coated zirconia surfaces (50.4 MPa) and the lowest values were obtained in the control group (12.00 MPa), both of which were cemented using a self-adhesive resin cement. CONCLUSION. The surface modifications tested in the current study affected the surface roughness and flexural bond strength of zirconia. The nano alumina coating method significantly increased the flexural bond strength of zirconia ceramics.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.6
• /
• pp.578-581
• /
• 2015

A rigid spino-pelvic fixation to anchor long constructs is crucial to maintain the stability of long fusion in spinal deformity surgery. Besides obtaining immediate stability and proper biomechanical strength of constructs, the S2 alar-iliac (S2AI) screws have some more advantages. Four Korean fresh-frozen human cadavers were procured. Free hand S2AI screw placement is performed using anatomic landmarks. The starting point of the S2AI screw is located at the midpoint between the S1 and S2 foramen and 2 mm medial to the lateral sacral crest. Gearshift was advanced from the desired starting point toward the sacro-iliac joint directing approximately $20^{\circ}$ angulation caudally in sagittal plane and $30^{\circ}$ angulation horizontally in the coronal plane connecting the posterior superior iliac spine (PSIS). We made a S2AI screw trajectory through the cancellous channel using the gearshift. We measured caudal angle in the sagittal plane and horizontal angle in the coronal plane. A total of eight S2AI screws were inserted in four cadavers. All screws inserted into the iliac crest were evaluated by C-arm and naked eye examination by two spine surgeons. Among 8 S2AI screws, all screws were accurately placed (100%). The average caudal angle in the sagittal plane was $17.3{\pm}5.4^{\circ}$. The average horizontal angle in the coronal plane connecting the PSIS was $32.0{\pm}1.8^{\circ}$. The placement of S2AI screws using the free hand technique without any radiographic guidance appears to an acceptable method of insertion without more radiation or time consuming.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.207-215
• /
• 1997

Aluminum (Al) thin films were deposited on the Si(100) and TiN(60 nm)/Si (100) substrate by the ionized cluster beam deposition (ICBD) method. The characteristics of thin films were examined by the $\alpha$-step, four-point-probe, Scanning Electron Spectroscopy (SEM), Auger Electron Spectroscopy (AES). The growth rate of the Al thin film increased and the resistivity decreased as the crucible temperature increased. At the crucible temperature $1800^{\circ}C$, the microstructure of Al thin film deposited was smooth and continuous the resistivity decreased as the acceleration voltage increased. Also, the minimum resistivity in Si(100) substrate and TiN(60 nm)/Si(100) substrate were 3.4 $\mu \Omega \textrm {cm}$, 3.6 $\mu \Omega \textrm {cm}$ at the acceleration voltage 4 kV and 2 kV respectively. From the AES spectrumt 14 wasn't detected any impurities In the Al thin film. Therefore the resistivity of Al thin film was affected by the microstructure of film.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.1
• /
• pp.57-66
• /
• 2001

This study used four theoretical models, such as two-point linear model, linear regression model, quadratic regression model and cubic regression model which are presented from The Ministry of Science and Technology, for extraction of urban surface temperature from Landsat TM band 6 image. Through correlation and regression analysis between result of four models and AWS(automatic weather station) observation data, this study could verify spatial distribution characteristic of urban surface temperature using GIS spatial analysis method. The result of analysis for surface temperature by landcover showed that the urban and the barren land belonged to the highest surface temperature class. And there was also -0.85 correlation in the result of correlation analysis between surface temperature and NDVI. In this result, the meteorological environmental characteristics wuld be regarded as one of the important factor in urban planning.