• 제목/요약/키워드: foundry

검색결과 1,762건 처리시간 0.032초

Ca-형 및 Na-형 벤토나이트의 제반 물성 및 유기양이온 흡착비교 (Comparison of Some Physicochemical Properties and Adsorption of Organic Cations between Ca- and Na-bentonites)

  • 고상모;김자영
    • 한국광물학회지
    • /
    • 제15권4호
    • /
    • pp.243-257
    • /
    • 2002
  • Ca-형과 Na-형 벤토나이트는 물성의 차이로 인하여 그 용도를 달리하며, 국내에서는 Ca-형 벤토나이트만 산출되기 때문에 산업체에서는 Na-형으로 변환시켜 토목용이나 주물용으로 활용되고 있다. 이 연구는 Ca-형과 Na-형 벤토나이트의 몇 가지 물성을 비교하여 그 차별성을 명확히 밝히고자 한다. 또한 HDTMA(Hexadecyltrimethylammonium)나 CP(Cetylprydinium)와 같은 유기양이온을 Ca-형과 Na-형 벤토나이트에 치환시켜 유기 양이온과 벤토나이트와의 흡착 특성을 비교 하고자 시도되었다. Na-형 벤토나이트는 Ca-형 벤토나이트에 비해 강한 알카리성, 매우 높은 팽윤성과 점도를 나타내나, 양이온 교환능과 MB(Methylene Blue) 흡착양은 변화를 보이지 않는다. 탁도는 Na-형 벤토나이트가 높으며 시간의 변화에 따라서도 거의 변화가 초래되지 않았으나, Ca-형 벤토나이트는 단시간 내 급격하게 응집이 초래되었다. 열 분석 결과 큰 차이는 보이지 않으나 흡착수와 층간수의 분해는 Na-형 벤토나이트가 보다 저온에서 빨리 일어나며, 완전한 구조의 분해는 Ca-형 벤토나이트가 Na-형 벤토나이트보다 저온에서 용이하게 일어났다. HDTMA와 CP를 벤토나이트에 치환케 되면 대체적으로 강한 층간팽창이 초래되어 저면 간격이 40 $\AA$ 이상 늘어남으로써 공간을 제공하여 연속적인 흡착이 초래되었다. HDTMA의 흡착은 양이온 교환능의 200% 이상을 치환하였을 때 거의 포화상태에 달하여 저면 간격이 $37~38\AA$으로 팽창이 초래되었으나, CP의 흡착은 양이온 교환능의 140% 이상을 치환케 되면 저면 간격이 $40\AA$에 달하여 거의 포화되었다. 이는 CP가 HDTMA보다 용이하게 층간팽창을 초래시키고 흡착이 일어남을 의미한다. CP와 Ca-형 및 Na-형 벤토나이트와의 흡착거동은 L형의 흡착등온선을 나타내었으며, 매우 규칙적이고 일관성 있게 흡착이 일어남으로써 안정한 상태를 유지하였다. 또한 층간 교환성 양이온 종에 관계없이 유기양이온 흡착거동은 거의 동일하게 일어났다.

동 . 하계 가막만 표층 퇴적물의 환경특성과 해양미생물의 분포 (Environmental Characteristics and Distributions of Marine Bacteria in the Surface Sediments of Kamak Bay in Winter and Summer)

  • 이대성;김윤숙;정성윤;강창근;이원재
    • 한국환경과학회지
    • /
    • 제17권7호
    • /
    • pp.755-765
    • /
    • 2008
  • To investigate correlation between the distribution of marine bacteria and environmental characteristics in the surface sediments of Kamak Bay, chemical oxygen demand(COD), acid volatile sulfide(AVS), ignition loss(IL), total organic carbon(TOC), and total organic nitrogen(TON) were measured and analyzed at 7 stations in winter and summer. In winter, COD and AVS ranged from 13.45 mg/g to 30.06 mg/g(average: 23.58 mg/g) and from 0.03 mg/g to 1.04 mg/g(average: 0.63 mg/g), respectively. IL, TOC, and TON ranged from 8.03% to 11.41%(average: 9.41%), from 1.17% to 2.10%(average: 1.62%), and from 0.09% to 0.18%(average 0.15%), respectively. In summer, COD, AVS, IL, TOC, and TON ranged from 14.06 mg/g to 32.19 mg/g(average: 24.71 mg/g), from 0.03 mg/g to 1.11 mg/g(average: 0.66 mg/g), from 9.00% to 12.15%(average: 10.96%), from 1.27% to 2.12%(average 1.77%), and from 0.12% to 0.19%(average: 0.16%), respectively. These values were relatively higher than those in winter. Kamak Bay had high C/N ratio that might be resulted from the input of terrestrial sewage and industrial wastewater. The number of marine viable bacteria was $8.9{\times}10^4\;cfu/g$ in winter and $9.7{\times}10^5\;cfu/g$ in summer. The most abundant species were Pseudomonas spp., Flavobacterium spp., and Vibrio spp, in the surface sediments of Kamak Bay. It was found that the concentration of organic matters and viable bacterial cells in the inner part were relatively higher than those in the outer of Kamak Bay. The distribution of viable bacterial cells was closely influenced by environmental factors.

Physical and Chemical Properties of Cement Mortar with Gamma-C2S

  • Lee, Sung-Hyun;Kim, Kyungnam;Mabudo, Mabudo;Song, Myong-Shin
    • 한국세라믹학회지
    • /
    • 제53권2호
    • /
    • pp.194-199
    • /
    • 2016
  • Presently, for the cement industry, studies that seek to reduce $CO_2$, because of the development of the plastic industry and demand for reduction of energy use, have been actively conducted among them, studies attempting to use Gamma-$C_2S({\gamma}-C_2S)$ to fix $CO_2$ have been actively conducted. The ${\gamma}-C_2S$ compound has an important function in reacting to $CO_2$ and stiffening through carbonatization in the air. The ${\gamma}-C_2S$ compound, reacting to $CO_2$ in the air, generates $CaCO_2$ within the pore structure of cement materials and densifies the pore structure this leads to an improvement of the durability and to the characteristic of resistance against neutralization. Therefore, in this experiment, in order to synthesize ${\gamma}-C_2S$, limestone sludge and waste foundry sands are used these materials are plasticized for 30 or 60 minutes at $1450^{\circ}C$, and are prevented from being cooled in the temperature range of $30{\sim}1000^{\circ}C$ when they are about to be cooled. XRD analysis and XRF analysis are used to determine the effects of this process on ${\gamma}-C_2S$ synthesization, the temperature at which a thing is plasticized, and the conditions for cooling that obtain in the plasticized clinker also, in order to confirm the $CO_2$ capture function, analysis of the major hydration products is conducted through an analysis of carbonatization depth and compressive strength, and through MIP analysis and XRD Rietveld analysis. As a result of these analyses, it is found that when ${\gamma}-C_2S$ was synthesized, the clinker that was plasticized at $1450^{\circ}C$ for one hour demonstrated the highest yield rate the sample with which the ${\gamma}-C_2S$ was mixed generated $CaCO_3$ when it reacted with $CO_2$ therefore, carbonatization depth and porosity were reduced, and the compressive strength was increased.

경남 거창 풍원 규석광상의 산상과 매장량 평가 (Occurrence and Reserve Evaluation of the Poongwon Quartzite Deposit in Geochang, Kyongsangnam Province)

  • 양경희;윤성효
    • 자원환경지질
    • /
    • 제39권1호
    • /
    • pp.1-7
    • /
    • 2006
  • 본 연구는 경상남도 거창군 북상면 산수리 지역에 산출되는 풍원 규암광에 대한 산상과 매장량평가에 대한 것이다. 규암광은 선캠브리아시대의 광역변성작용과 화강암화작용에 의해 형성된 것으로, 덕유산층인 운모편암과 화강편마암의 경계부에서 산출되고 있다. 본 규암층은 주변의 고기퇴적암류(쳐트, 사암)의 규소성분들이 추출되어 재결정되고 재배열되어 형성되어진 것이다. 규암층은 유색$\~$담회색$\~$담황색을 띠는 세립의 치밀하고 견고한 암상이며, 규암은 대부분 $0.5\~1mm$ 내외의 석영으로 구성되어 있으며, 약한 엽리가 발달되어 있다. 규암층은 주향 N57E-N84E, 경사 $51-60NW(264/51\~237/60)$을 가지며, 부존 규모는 최대 층후 60m, 연장 약 140m, 최대 노두폭(露頭幅)이 약 35m로 렌즈상 혹은 소세지형으로 산출되고 있다 본 규석광의 산술평균품위는 $SiO_2=94.4wt\%,\;Al_2O_3=3.3wt\%,\;Fe_2O_3=0.8wt\%,\;K_2O=0.7wt\%$으로 주물사용, 건축용, 시멘트용으로 적합하다. 가채확정광량은 200,811M/T으로 평가된다.

저전력 아날로그 CMOS 윤곽검출 시각칩의 설계 (Design of Analog CMOS Vision Chip for Edge Detection with Low Power Consumption)

  • 김정환;박종호;서성호;이민호;신장규;남기홍
    • 센서학회지
    • /
    • 제12권6호
    • /
    • pp.231-240
    • /
    • 2003
  • 고해상도의 윤곽검출 시각칩을 제작하기 위해 윤곽검출 회로의 수를 증가시킬 경우 소비전력 문제 및 회로를 탑재할 칩의 크기를 고려하지 않으면 안된다. 칩을 구성하는 단위회로의 수적 증가는 소비전력의 증가와 더불어 대면적을 요구하게 된다. 소비전력의 증가와 CMOS 생산 회사에서 제공하는 칩의 크기가 수 십 $mm^2$이라는 조건은 결국 단위회로의 수적 증가를 제한하게 된다. 따라서 본 연구에서는, 고해상도의 윤곽검출 시각칩 구현을 위한 윤곽검출 회고의 수적 증가에 따른 전력소비의 최소화 방법으로 전자스위치(electronic switch)가 내장된 윤곽검출 회로를 제안하고, 제한된 칩의 면적에 더 많은 윤곽검출 회로를 넣기 위해 시세포 역할의 광검출 회로와 윤곽검출 회로를 분리하여 구성하는 방법을 적용하였다. $128{\times}128$ 해상도를 갖는 광검출 회고가 $1{\times}128$의 윤곽검출 회고를 공유하여 동일한 칩 면적에 향상된 해상도를 갖는 칩을 설계하였다. 설계된 칩의 크기는 $4mm{\times}4mm$이고, 소비전력은 SPICE 모의실험을 통해 약 20mW가 됨을 확인하였다.

경주지역 자동차 부품 제조업의 공정별 작업환경실태에 관한 연구 (A Study on the Status of Working Environment by Type of Working Processes in Manufacturing Industry of Parts and Accessories for Motor Vehicles and its Engines)

  • 박성준;이원호;이관;문덕환
    • 한국산업보건학회지
    • /
    • 제15권2호
    • /
    • pp.90-103
    • /
    • 2005
  • Objective: This study was carried out to assess the status of working environments, to improve the working environments, and to be helpful to prevent occupational disease. Methods: The authors measured the noise level, concentration of dust, heavy metals, organic solvents, and other chemicals at 95 industries (22 working processes) by type of working process in manufacturing industry of parts and accessories for motor vehicles and its engines from January to December 2003. Samples were measured and analyzed by regulations of Korea Ministry of Labor, manuals of National Institute for Occupational Safety and Health (NIOSH) and Occupational Safety and Health Administration (OSHA). Results: Results are as follows. 1. Major processes exceeding mean noise levels provided the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV) were shakeout [97.5 dB(A)]. shot-blast [94.2 dB(A)], pressing [92.9 dB(A)], crushing [91.2 dB(A)], and cleaning [90.6 dB(A)]. 2. Mean concentrations of dusts were not exceeded to the TLV. But concentration on some points of processes as like welding (6.50 mg/m3), foundry (5.24 mg/m3) were exceeded. 3. Mean concentrations of heavy metals were not exceeded to the TLV. 4. Mean concentrations of organic solvents and chemicals were not exceeded to the TLV. 5. Improving rate for working environment were significantly higher in industries with health manager than without (p<0.05), and by increasing the year of working environmental measurement (p<0.01). Conclusions: The results suggest that working processes of exceeding to the TLV will be needed rapid improvement of the working environment, and also the others will be needed positive management of the working environment. Health managers must be recommended to employ in the workplace, and further studies for relationship between working environment and health effects for the workers must be carried out.

대기오염에 의한 폐장조직 손상 -연구방향의 설정을 위한 논의- (Human Lung Insults due Air Pollutant -A Review for Priority Setting in the Research-)

  • 김건열;백도명
    • 환경위생공학
    • /
    • 제7권2호
    • /
    • pp.95-110
    • /
    • 1992
  • Much progress has been made in understanding the subcellular events of the human lung injuries after acute exposure to environmental air pollutants. Host of those events represent oxidative damages mediated by reactive oxygen species such as superoxide, hydrogen peroxide, and the hydroxy, free radical. Recently, nitric oxide (NO) was found to be endogenously produced by endothelial cells and cells of the reticulo-endothelial system as endothelialderived relaxation factor (EDRF) which is a vasoactive and neurotransmitter substance. Together with superoxide, NO can form another strong oxidant, peroxonitrite. The relative importance of exogenous sources of $N0/N0_2$ and endogenous production of NO by the EDRF producing enzymes in the oxidative stresses to the heman lung has to be elucidated. The exact events leading to chronic irreversible damage are still yet to be known. From chronic exposure to oxidant gases, progressive epithelial and interstitial damages develop. Type I epithelial cells become thicker and cover a smaller average alveolar surface area while thee II cells proliferate instead. Under acute damages, the extent of loss of the alveolar epithelial cell lining, especially type II cells appears to be a good predictor of the ensuing irreversible damage to alveolar compartment. Interstitial matrix undergo remodeling during chronic exposure with increased collagen fibers and interstitial fibroblasts. However, Inany of these changes can be reversed after cessation of exposure. Among chronic lung injuries, genetic damages and repair responses received particular attention in view of the known increased lung cancer risks from exposure to several air pollutants. Heavy metals from foundry emission, automobile traffics, and total suspended particulate, especially polycystic aromatic hydrocarbons have been positively linked with the development of lung cancer. Asbestos in another air pollutant with known risk of lung cancer and mesothelioma, but asbestos fibers are nonauthentic in most bioassays. Studies using the electron spin resonance spin trapping method show that the presence of iron in asbestos accelerates the production of the hydroxy, radical in vitro. Interactions of these reactive oxygen species with particular cellular components and disruption of cell defense mechanisms still await further studies to elucidate the carcinogenic potential of asbestos fibers of different size and chemical composition. The distribution of inhaled pollutants and the magnitude of their eventual effects on the respiratory tract are determined by pollutant-independent physical factors such as anatomy of the respiratory tract and level and pattern of breathing, as well as by pollutant-specific phyco-chemical factors such as the reactivity, solubility, and diffusivity of the foreign gas in mucus, blood and tissue. Many of these individual factors determining dose can be quantified in vitro. However, mathematical models based on these factors should be validated for its integrity by using data from intact human lungs.

  • PDF

Bacillus pumilus RS7에 의한 난분해성 케라틴 분해효소의 생산 및 아미노산 공급원으로서 우모 분해산물 (Production of Keratinolytic Protease by Bacillus pumilus RS7 and Feather Hydrolysate As a Source of Amino Acids)

  • 우은옥;김민주;손형식;유은연;정성윤;손홍주;이상준;박근태
    • 한국환경과학회지
    • /
    • 제16권10호
    • /
    • pp.1203-1208
    • /
    • 2007
  • Feathers are produced in huge quantities as a waste product at commercial poultry processing plants. Since feathers are almost pure keratin protein, feather wastes represent an alternative to more expensive dietary ingredients for animal feedstuffs. Generally they become feather meal used as animal feed after undergoing physical and chemical treatments. These processes require significant energy and also cause environmental pollutions. Therefore, biodegradation of feather by microorganisms represents an alternative method to prevent environment contamination. The aim of this study was to investigate cultural conditions affecting keratinolytic protease production by Bacillus pumilus RS7. We also assessed the nutritive value of microbial and alkaline feather hydrolysates, The composition of optimal medium for the keratinolytic protease was fructose 0.05%, yeast extract 0.3%, NaCl 0.05%, K2HPO4 0.03%, KH2PO4 0.04% and MgCl2 6H2O 0.01%, respectively. The optimal temperature and initial pH was $30^{\circ}C$ and 9.0, respectively. The keratinolytic protease production under optimal condition reached a maximum after 18 h of cultivation. Total amino acid content of feather hydrolysates treated by NaOH and B. pumilius RS7 was $113.8\;{\mu}g/ml$ and $504.9\;{\mu}g/ml$, respectively. Essential amino acid content of feather hydrolysates treated by NaOH and B. pumilius RS7 was $47.2\;{\mu}g/ml$ and $334.0\;{\mu}g/ml$, respectively. Thus, feather hydrolysates have the potential for utilization as an ingredient in animal feed.

생물학적 폐수처리 공정에서의 계절 및 유입수 성상 변화에 따른 미생물 군집 특성 변화 (Changes of Microbial Community Structure According to a Changes of Season and Influent Characteristics in Biological Wastewater Treatment)

  • 손형식;손희종;김미아;유은연;이건;이상준
    • 대한환경공학회지
    • /
    • 제32권8호
    • /
    • pp.780-786
    • /
    • 2010
  • 실험기간 동안 생물학적 처리공정에서의 BOD와 COD의 제거율은 각각 83.1~98.6%, 67.2~85.2%였으며, 단위 공정별로 미생물 군집 변화에서는 가을과 겨울의 경우 호기조, 산소조 및 무산소조에서 전체적으로 비슷한 군집양상을 나타내었다. RRP 그룹의 경우는 무산소조에서 3배 정도 증가하여 DGGE 밴드결과에서 새로운 밴드들이 나타난 것과 일치하는 경향을 보였다. 또한 비슷한 분포를 나타내었지만, 가을엔 ${\alpha}$-Proteobacteria가 우점하였고, 겨울엔 CF 그룹이 우점을 보였다. 봄에 분석한 DGGE와 FISH의 결과에서는 유입수의 성상변화에 따른 미생물의 군집 패턴이 가을과 겨울의 경우에 비해 완전히 다른 패턴을 보였으며, FISH 결과에서 others 그룹의 증가와 DGGE 밴드결과에서 새로운 밴드들이 나타난 것과 일치하는 경향을 보였다. Eubacteria는 $1.7{\sim}7.6{\times}10^9\;cells/mL$. 정도를 보였으며, 전체적인 미생물 군집을 평가하는데 FISH와 DGGE는 매우 효과적이었고, 계절별 및 공정별 군집의 변화에 대해 유용한 평가가 가능하였다.

산업보건연구에서의 통계학적 분석 (Statistical analyses in an occupational health study)

  • 백도명;최정근;손미아
    • 응용통계연구
    • /
    • 제6권2호
    • /
    • pp.201-215
    • /
    • 1993
  • 산업보건연구의 통계학적 분석은 작업환경측정에 대한 평가방법과 산업보건에 특유한 혼란 변수의 통제 등 건강상태와의 연관성을 분석하는 평가방법에 있어 다른 보건통계분야와 구 별되는 특성을 지니고 있다. 본 논문에서는 주물공장 근로자들의 호흡기 건강상태와 작업환 경에서 폭로되는 유해물질에 대한 조사를 통하여 산업보건연구에 사용되는 통계학적 분석에 대한 기술을 하였다. 조사된 환경측정결과의 일부는 허용폭로기준을 초과하고 있었는 바, 폭 로기준의 준수여부를 판정하기 위하여 작업환경측정결과와 그들의 대수변환치들로부터 얻은 산술평균과 대수평균들이 폭로기준과 다른지에 대한 t-검정을 실시하였다. 환경측정을 비롯 한 위험요인들과 그들로 인한 건강상태와의 관계 분석을 위해, 범주적 건강측정 변수인 경 우에는 $\chi$-square 검정과 다변량 logistic분석을 시행하였고, 연속적 변수인 경우에는 다 변량 회귀분석을 시행하였다. 작업환경내의 오염물질의 농도는 그 측정장소와 측정시점에 따라 매우 가변적이다. 이러한 작업환경의 측정결과를 평가하는데 있어 사용될 수 있는 서 로 다른 여러 지수들의 장단점과 가변적 측정결과들로 인한 오차를 보정할 수 있는 통계학 적 분석방법에 대한 논의를 하였다. 본 조사의 폐기능검사 결과는 직업에서 폭로되는 정도 와 아무 연관성을 보이고 있지 않은 바, 이는 “건강한 그로자 효과”에 기인한 것으로 추정되고 있다.

  • PDF