• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.91-93
• /
• 2009

A large steel ingot needs to be larger and larger in size and an ultra high clean, no defect in quality with a low hot top ratio for the resent heavy industry. The demands are very difficult to achieve simultaneously because of their contradictive effect to each other in results. In this study, 30ton steel ingot was cast in a foundry with an optimized design parameter of cast mold and cast process conditions for the low hot top ratio, 12%. The cast ingot was analyzed in macro defect, segregations, and cleanness. No macro defect was founded in central surface of the ingot. The degree of segregation and cleanness are in the controlled range with a sound quality.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.94-97
• /
• 2009

Cast defect in large steel ingots are estimated in quality and compared each other cast conditions on simulation results by now. The cast defects, micro-crack, shrinkage, pin hole which are predictable in simulation with a reasonable accuracy. In this study, 15 ton steel ingot casting was simulated for solidification model and cast defect prediction. And the real cast was carried out in a foundry for the compeer to the simulation results, the cast defect prediction. Also, the quantity of predicted defect was tried to measuring with the defect mach counting for the various simulated cast conditions. The defect quantity work was used to find the optimized cast condition in DOE(design of experiment) procedure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제13권5호
• /
• pp.49-54
• /
• 2013

We designed a burst mode optical receiver for 1.25Gbps PON(Passive Optical Network), fabricated it using $0.8{\mu}m$ BiCMOS foundry. We minimized the loss of the data in the front of the burst by reducing AGC(Automatic Gain Control) signal generation time using an exponential amplifier. We confirmed that AGC of the burst mode optical receiver functioned well and showed good performance in measurement. However, although the eye of the eye pattern was opened the jitter characteristic was deteriorated due to the heavy waveform distortion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.513-516
• /
• 2005

Previous study on recycled aggregate(RA) has largely been limited to the manufacture of nonstructural-grade concrete due to undesirable physical properties of them such as, high water absorption leading to high water demand of concrete. The restriction seriously limits its market and consequently diminishes the use of RA as a construction material. This paper presents the mechanical properties of recycled concrete substituted by both waste foundry sand(WFS) and recycled coarse aggregate replaced with fine and coarse aggregate concurrently. The result shows that the compressive and tensile strength decrease with the increment of substitution ratio of RA and WFS while bending strength of RA concrete increase.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제57권12호
• /
• pp.2269-2275
• /
• 2008

This paper examined the simulation results after applying not only spiral inductor's 3D EM simulation but also de-embedding technique to reduce the pad's RF effects. When calculating standard deviation with measurement results not only the gain at 0.5GHz${\sim}$4GHz but also noise figure at 1.8GHz${\sim}$4GHz, the simulation results includes de-embedded inductor' model improved gain deviation by 0.171 and noise figure deviation by 0.151 than the results from simulation with foundry inductor equivalent circuit models.

• KSBB Journal
• /
• 제13권2호
• /
• pp.119-124
• /
• 1998

Twelve bacterial strains capable of growing on phenol minimal medium were isolated from iron foundry activated sludge by enrichment culture, and amount them, one isolate which was the best in cell growth and phenol degradation was selected and identified as Acinetobacter junii POH. The optimal temperature, initial pH and phenol concentration in the above medium were 3$0^{\circ}C$, 7.5 and 1000 ppm, respectively. Cell growth of Acinetobacter junii POH dramatically increased 20 hrs cultivation-time and reached a almost stationary phsae 40 hrs cultivation-time then phenol was degraded about 98%. Cell growth was inhibited y phenol at concentrations over 1500 ppm. The isolate was resistant to several antibiotics as well as various heavy metal ions. The growth-limiting log P value of Acinetobacter junii POH on organic solvents was 2.9 in the LB medium. Therefore, it is suggested that Acinetobacter junii POH could be effectively used for the biological treatment of wastewater containing the presence of heavy metal ions and organic solvents.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• 제16권6호
• /
• pp.43-48
• /
• 2007

It is important to measure the rotational accuracy of lathe spindle as it affects to the qualities of all machines machined by the lathe using in industries. The bad rotational accuracy of lathe spindle are caused mainly by wearness of the spindle in using and quality of spindle when machining and using low level bearings. It occurs especially in case of lathes because the cutting force acting to work-piece act on one side to the spindle not to both sides symmetrically. Therefore in this study, constructing experimental apparatus for measuring of rotational accuracy by using eddy current type gap sensors AEC5706PS and sensors, s-06LN, data acquisition board DT9834(USB type) and software for data acquisition, DT Measure Foundry ver. 4.0.7 etc., error data acquired in the rotational accuracy test of lathe spindle are analysed in plots and statistical treatments.

• Magazine of the Korea Concrete Institute
• /
• 제9권6호
• /
• pp.195-206
• /
• 1997

산업폐기물인 폐주물사를 재활용하여 에너지절감과 환경오염방지효과를 얻을 수 있다. 반요인실험법을 사용하여 폐주물사를 잔골재에 일정비율 치환한 콘크리트의 적정배합설계제시를 위한 예비실험에서 물-시멘트비, 폐주물사의 잔골재치환율, 잔골재율, 슬럼프와 같은 주요변수와 변수사이의 2차상호작용을 파악하였다. 예비실험결과 폐주물사의 잔골재치환율 70%까지 실시하였을 때 폐주물사를 혼입한 콘크리트의 강도 발현에 가장 중요한 변수는 물-시멘트비로 분석되었고 폐주물사의 잔골재치환율은 거의 영향이 없는 것으로 분석되어 폐주물사를 콘크리트의 잔골재로 대체할 수 있음을 알 수 있었다. 각 변수의 2차상호작용에서는 폐주물사의 잔골재치환율과 잔골재율의 상관관계가 콘크리트의 강도발현에 가장 큰 영향을 미치는 것으로 나타났다. 목표압축강도에 대한 적정배합조건을 폐주물사의 잔골재 치환율에 따라 물-시멘트비, 잔골재율에 대해 제시하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제26권3호
• /
• pp.67-73
• /
• 2003

Manufacturing technologies of compound semiconductor are similar to the process of memory device, but management technology of manufacturing process for compound semiconductor is not enough developed. Semiconductor manufacturing environment also has been emerged as mass customization and open foundry service so integrated manufacturing system is needed. In this study we design the integrated manufacturing system for compound semiconductor fabrication t hat has monitoring of process, reduction of lead-time, obedience of due-dates and so on. This study presents integrated manufacturing system having database system that based on web and data acquisition system. And we will implement them in the actual compound semiconductor fabrication.

• Korean Journal of Metals and Materials
• /
• 제49권10호
• /
• pp.790-796
• /
• 2011

To reduce the heat released during intermetallic reaction, Ni-50at%Al powder compact has been previously annealed at several conditions before the reaction. The effects of the pre-annealing conditions on the reaction synthesis process have been investigated. Experimental results show that the heat released during the reaction synthesis decreased proportionally with increase of the pre-annealing temperature and duration time. The reaction duration period was significantly increased when the intermetallics were formed in the powder compact during the pre-annealing. This was attributed to the fact that the reaction occurred by solid-state diffusion between the un-reacted elemental atoms and that the $NiAl_3$ phase formed predominantly during pre-annealing.