• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.808-813
• /
• 2003

This paper is analysis of opening thick plate on foundation. This paper has the object of investigating natural frequencies of opening thick plates on pasternak foundation by means of finite element method and providing Kinematic design data for mat of building structures. In this paper, vibration analysis of rectangular opening thick plate is done by use of Serendipity finite element with 8 nodes by considering shearing strain of plate. It is shown that natural frequencies depend on not only Winkler foundation Parameter but also shear foundation parameter, opening position, opening size.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.37-43
• /
• 2019

This paper studies application of modified couple stress theory and first order shear deformation theory to magneto-electro-mechanical vibration analysis of three-layered size-dependent curved beam. The curved beam is resting on Pasternak's foundation and is subjected to mechanical, magnetic and electrical loads. Size dependency is accounted by employing a small scale parameter based on modified couple stress theory. The magneto-electro-mechanical preloads are accounted in governing equations to obtain natural frequencies in terms of initial magneto-electro-mechanical loads. The analytical approach is applied to investigate the effect of some important parameters such as opening angle, initial electric and magnetic potentials, small scale parameter, and some geometric dimensionless parameters and direct and shear parameters of elastic foundation on the magneto-electro-elastic vibration responses.

• 한국의류학회지
• /
• 제25권4호
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• Steel and Composite Structures
• /
• 제49권4호
• /
• pp.361-380
• /
• 2023

A size dependent bending behavior of piezoelectrical flexoelectric layered perforated functionally graded (FG) composite nanobeam rested on an elastic foundation is investigated analytically. The composite beam is composed of regularly cutout FG core and two piezoelectric face sheets. The material characteristics is graded through the core thickness by power law function. Regular squared cutout perforation pattern is considered and closed forms of the equivalent stiffness parameters are derived. The modified nonlocal strain gradient elasticity theory is employed to incorporate the microstructure as well as nonlocality effects into governing equations. The Winkler as well as the Pasternak elastic foundation models are employed to simulate the substrate medium. The Hamiltonian approach is adopted to derive the governing equilibrium equation including piezoelectric and flexoelectric effects. Analytical solution methodology is developed to derive closed forms for the size dependent electromechanical as well as mechanical bending profiles. The model is verified by comparing the obtained results with the available corresponding results in the literature. To demonstrate the applicability of the developed procedure, parametric studies are performed to explore influences of gradation index, elastic medium parameters, flexoelectric and piezoelectric parameters, geometrical and peroration parameters, and material parameters on the size dependent bending behavior of piezoelectrically layered PFG nanobeams. Results obtained revealed the significant effects both the flexoelectric and piezoelectric parameters on the bending behavior of the piezoelectric composite nanobeams. These parameters could be controlled to improve the size dependent electromechanical as well as mechanical behaviors. The obtained results and the developed procedure are helpful for design and manufacturing of MEMS and NEMS.

• Geomechanics and Engineering
• /
• 제27권6호
• /
• pp.595-604
• /
• 2021

With the advantages of high permeability and strength, pervious concrete piles can be suitable for ground improvement with high water content and low bearing capacity. By comparing the strength and permeability of pervious concrete with different aggregate sizes (3-5 mm and 4-6 mm) and porosities (20%, 25%, 30% and 35%), the recommended aggregate size (3-5 mm) and porosity (30%) can be achieved. The model tests of the pervious concrete piles in soft soil (silt and clay) foundations were conducted to evaluate the bearing characteristics, results show that, for the higher consolidation efficiency of the silty foundation, the bearing capacity of the silty foundation is 16% higher, and the pile-soil stress ratio is smaller. But when it is the ultimate load for the piles, they will penetrate into the underlying layer, which reduces the pile-soil stress ratios. With higher skin friction of the pile in the silty foundation, the pile penetration is smaller, so the decrease of the pile axial force can be less. For the difference in consolidation efficiency, the skin friction of pile in silt is more affected by the effective stress of soil, while the skin friction of pile in clay is more affected by the lateral stress. When the load reaches 4400 N, the skin friction of the pile in the silty foundation is about 35% higher than that of the clay foundation.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.499-507
• /
• 2018

For the spatiotemporally aligned observation of photothrombosis induction and transient variations of in vivo brain stroke, we developed a novel photothrombosis inducing system compatible to a magnetic resonance imaging (MRI) system using nonmagnetic stereotaxic equipment. From the spatial point of view, the system provides a more reliable level of reproducibility of the photothrombosis in each brain. From the temporal point of view, from T1- and T2-weighted in vivo MR (magnetic resonance) images, the transient variations such as incidence, location, and size of the thrombosis are measured quantitatively. In addition, the final variation is observed in the ex vivo brain by TTC (Triphenyltetrazolium chloride) staining based on histological assay and utilized for the verification of the MR images. From the experimental result of the rat brain, the proposed system shows more reliable characteristics for transient variations of brain strokes.

• 한국강구조학회 논문집
• /
• 제15권3호
• /
• pp.291-298
• /
• 2003

최근 건축물의 대형화로 구조물의 기초는 비균질지반에 지지된다. 본 연구는 면내력을 받는 후판의 진동해석을 한 것이다. 장방 형판은 등방, 균질의 선형 탄성재료로 구성되었다. 장방형 후판의 진동해석은 8절점과 9절점을 이용한 장방형 유한요소를 사용하여 행하였다. 본 연구에서 기초를 수직스프링으로 이상화한 Winkler지반에 전단지반층을 추가한 Pasternk지반으로 이상화하였다. 지반의 강성을 달리한 비균질 Pasternak지반에 지지된 판을 해석하기 위해 중앙부분과 가장자리 부분의 Winkler지반계수를 WFP1과 WFP2로 선택하였다. (그림 4.) Winkler지반계수 WFP1과 WFP2는 0, 10, $10^2$, $10^3$으로 변환시키고 전단지반강성은 0, 5, 10으로 하였다. 후판의 좌굴응력(${\sigma}_{cr}$)에 대한 면내력의 비는 각각 0.4, 0.8에 대해 적용하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.69-77
• /
• 2021

The objective of this research is to explore the inconclusive theoretical and empirical association between institutional ownership and firm performance in the context of emerging Pakistani economy. The data set consists of all the non-financial firms listed on the Pakistan Stock Exchange (PSX). Annual data set covers the period ranging from 2010 to 2015. However, the econometric analysis does not include those firms with incomplete data. Thus the final data set comprised of an unbalanced panel of sample of 276 firms with 1231 firms years observations. Data related to the institutional ownership and other variables taken for the study were extracted through the annual financial reports of the firms. The research used Tobin's Q as a proxy of market measure of firm performance and tested the endogenous relation with institutional ownership through OLS and 2SLS approach. The study also applied Durbin-Wu-Hausman test to determine the endogeneity before analyzing the 2SLS model. The Durbin-Wu-Hausman Test (DWH) conform the endogenous link between institutional ownership and performance and vice versa. The results derived from 2SLS also confirm a highly significant relationship and two way direct proportional relationships between the institutional investment and corporate performance in the studied companies.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.279-286
• /
• 2006

The main purpose of this paper is to apply differential transformation method(DTM) and generalized differential quadrature method(GDQM) to vibration analysis of Euler-Bernoulli beam with open cracks on elastic foundation. In this paper the concepts of DTM and GDQM were briefly introduced. The governing equation of motion of the beam with open cracks on elastic foundation is derived. The cracks are modeled by massless substitute spring. The effects of the crack location, size and the foundation constants, on the natural frequencies of the beam, are investigated. Numerical calculations are carried out and compared with previous published results.

• 한국산학기술학회논문지
• /
• 제12권8호
• /
• pp.3729-3744
• /
• 2011

토목구조물이 대형화되고 규모가 커짐에 따라 하부 기초 지반 조건도 위치마다 상이하게 나타나게 되어 일부구간에서 기초지반의 불균일성으로 인해 국부적으로 지내력이 부족한 경우가 빈번하게 발생되고 있다. 일반적으로 상부 구조물의 안정성 확보 차원에서 기초지반이 균질하지 않은 경우에는 가능한 보수적인 기초공법을 적용함으로써 안정성 확보를 그 주안점으로 두고 있다. 직접기초와 파일기초가 혼용되는 복합기초의 경우에 대한 연구가 미비하여 그 적용성과 안정성이 검증되지 못하고 개략검토를 통한 복합기초의 시공이 적용되고 있는 점이 원인으로 사료된다. 본 연구에서는 직접기초와 파일기초가 혼용되는 복합기초에 대한 적용가능성을 평가하고, 석고와 주문진 표준사, 쇄석 등을 이용하여 다양한 지반을 조성한 실내 모형실험을 수행하여 동일기초와 복합기초의 거동을 비교, 분석하였다. 이와 같은 모형실험을 통한 연구결과를 근거로 복합기초(직접기초+말뚝기초)와 보수적인 말뚝기초 및 전면기초의 거동을 확인하고 지내력이 급격히 변화하는 지반의 경우 기존의 기초보다 효율적이고 경제적인 복합기초의 안정성 및 적용성을 평가하였다. 그 결과, 복합기초의 적용시 보수적인 말뚝기초보다 전체적인 침하량이 증가하였으나 그 차이가 미비하였고, 구조물의 부등침하에 대한 안정성평가 결과, 적용 가능한 것으로 확인되었다.