• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.329-333
• /
• 1995

The usual methods for the temperature control of mass-concrete structures include the use of low-heat cement, pre-cooling, or pipe-cooling. In order to control the heat of hydration of mass-concrete structures such as massive pier or anchor block, and mat foundation, the pipe cooling method is widely acceptable for pratical use. In this paper, method of analysis using the Finite Element Method was applied to analyze the heat exchange on the field of three dimensional thermal conduction. The result of analysis Well agreed with experimentally measurement data by "KUMATANI". The method of this analysis will be used widely to control the heat of hydration by the pipe cooling in mass-concrete.-concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.229-230
• /
• 2023

In this study, the hydration heat differential method was applied to mass concrete structures, and the hydration heat analysis was compared and analyzed with on-site measurement results. The results showed that the temperature history measurements of mass concrete were managed at a difference of 8.4 ℃, and although there was some deviation in thermal stress, a similar trend was observed. Consequently, it was determined that the thermal stress on the surface of mass concrete is less than its tensile strength, which would prevent the occurrence of thermal cracks.

• 콘크리트학회지
• /
• 제23권2호
• /
• pp.47-51
• /
• 2011

• Structural Engineering and Mechanics
• /
• 제63권3호
• /
• pp.281-292
• /
• 2017

Architecture constraints in buildings may typically cause irregularities in the distribution of stiffness and mass and consequently causes non-compliance of centers of mass, stiffness and strength. Such buildings are known as asymmetric buildings the distribution of strength and stiffness is one of whose main challenges. This distribution is more complicated for concrete buildings with RC shear walls in which stiffness and strength are interdependent parameters. The flexibility under the foundation is another subject that can affect this distribution due to the variation of dynamic properties of the structure and its constituting elements. In this paper, it is attempted to achieve an appropriate distribution pattern by expressing the effects of foundation flexibility on the seismic demand of concrete shear walls and also evaluate the effects of this issue on strength and stiffness distribution among lateral force resistant elements. In order to understand the importance of flexibility in strength and stiffness distribution for an asymmetric building in different conditions of under-foundation flexibility, the assigned value to each of the walls is numerically calculated and eventually a procedure for strength and stiffness distribution dependencies on flexibility is provided.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.287-297
• /
• 2014

최근 증가 추세에 있는 화력발전소 건설에 있어서, 터빈 기초 구조물은 규모가 매우 큰 매스콘크리트이다. 매스콘크리트의 수화열은 구조물의 품질과 공기 등에 중대한 영향을 미치는 요인 중 하나이므로, 수화열 제어를 위한 적절한 방안은 필수적이다. 이 연구에서는 국내 복합화력발전소 터빈 기초 시공에 앞서 수화열 해석을 통하여 수화열 균열 발생 가능성을 예측하고, 수화열 제어 방안으로서 콘크리트 배합 및 양생방법 변경을 제안하였다. 콘크리트 배합은 기존 1종 보통시멘트 콘크리트 배합에서 슬래그시멘트 콘크리트 배합으로 변경을 제안하였고, 기존 양생포 및 살수양생방법을 개선하기 위하여 매스콘크리트 중심부와 표면부의 온도를 모니터링하여 온도차를 일정수준 이하로 일정하게 유지시켜주는 양생자동화시스템을 적용한 양생방법을 제안하였다. 실제 시공시에는 슬래그콘크리트 배합을 사용하고, 2기의 동일한 터빈 기초 구조물에 대하여 각각 보온양생공법과 양생자동화시스템을 적용하여 양생방법에 따른 온도균열 제어효과를 비교하였으며, 2기의 매스콘크리트에서 온도, 변형률 모니터링 및 균열 조사를 통하여 수화열 제어 효과를 평가하였다.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.139-154
• /
• 2023

Red-bed soft rock is a common stratum and it is necessary to evaluate the mechanical properties and bearing capacity of red-bed soft rock mass affected by different environmental effects. This paper presents a complete procedure for evaluating the bearing capacity of red-bed soft rock by means of geophysical exploration and in-situ rock mechanics tests. Firstly, the thickness of surface loosened rock mass of red-bed soft rock was determined using geophysical prospecting method. Then, three environmental effects, including natural weathering effect, dry-wet cycling effect and concrete sealing effect, were considered. After each effect lasted for three months, in-situ rock mass mechanical tests were conducted. The test results show that the mechanical properties of rock mass considering the sealing effect of concrete were maintained. After considering the natural weathering effect, the mechanical parameters decrease to a certain extent. After considering the effect of dry-wet cycling, the decreases of mechanical parameters are the most significant. The test results confirm that the red-bed soft rock dam foundation rock mass will be significantly affected by various environmental effects. Therefore, combined with the mechanical test results, some useful implementations are proposed for the construction of a red-bed soft rock dam foundation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.309-312
• /
• 2000

Nonuniform temperature distribution due to hydration heat induces thermal stress in mass concrete. At early ages, such thermal stress may induce thermal cracks which can affect on the durability ad safety of the structure. Steel fiber reinforced concrete may be useful when a large amount of energy has to be absorbed, when a high tensile strength and reduced cracking are desirable, of an improvement of thermal conductivity is desirable. In LG IPP Project, the upper part(50cm) of turbine foundation was replaced with steel fiber reinforced concrete to reduce the thermal crack induced by hydration heat. It was shown that the thermal crack control could be successfully achieved by steel fiber reinforced concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.333-336
• /
• 1999

The crack of concrete induced by the heat of hydration is a serious problem, particularly in concrete structures such as mat-slab of nuclear reactor buildings, dams or large footings, foundations of high rise buildings, etc.. As a result of the temperature rise and restriction condition of foundation, the thermal stress which may induce the cracks can occur. Therefore the various techniques of the thermal stress control in massive concrete have been widely used. One of them is prediction of the thermal stress, besides low-heat cement which mitigates the temperature rise, pre-cooling which lowers the initial temperature of fresh concrete with ice flake, pipe cooling which cools the temperature of concrete with flowing water, design change which considers steel bar reinforcement, operation control and so on. The Aim of this paper is to verify the effect of low heat blended cement in reducing thermal stress in slab type's mass concrete such as container harbor structures.

• 한국건축시공학회지
• /
• 제17권1호
• /
• pp.39-46
• /
• 2017

최근 건축물의 기초는 구조체의 안정성과 연관하여 두꺼운 매스콘크리트 형태가 설계되어지고 있다. 그런데, 이와 같은 매트 매스콘크리트는 800mm 이상의 두꺼운 부재로 설계되는 경우가 많아짐에 따라 수화열에 의한 균열이 문제점으로 제기 되고 있다. 이에, 본 연구에서는 상 하부를 구분하여 타설하는 실무조건을 고려하여, 컴퓨터 프로그램상으로 하부와 상부의 최적치를 도출한 다음, 실구조체에 적용 해석치와 실측치간을 비교하므로서 효율적인 수화열균열 저감방안을 제안하고자 하였다. 그 결과, 상 하부 타설 콘크리트간의 저발열 배합정도를 고려한 수화발열량차 적용은 침하균열 방지 및 수화열 균열제어에 효과적인 것으로 밝혀졌다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권1호
• /
• pp.156-164
• /
• 2010

부상식 면진기초 매스콘크리트의 시공이 6차에 걸쳐 분리타설로 이루어졌다. 선행 Mock-up실험을 통하여 각각 온도이력계측과 수화열해석이 병행되었고 최선의 양생조건과 시공순서가 부여되었다. 그 결과 수화발열과 냉각시 발생가능한 온도균열은 나타나지 않았다. 그러나 현행 콘크리트 시방서 매스콘크리트편의 온도균열지수의 간이식, 정밀식 모두 낮은 범위의 지수를 나타내었다. 이는 수화열 거동 및 균열예측에 있어 온도균열 발생확률이 높은 것으로 나타나, 실제 타설경과 내용과 상이함을 알 수 있었다. 각 시공단계의 계측 및 해석결과는 대상 부재의 크기와 형상을 고려하여 부재내부를 등온도분포영역과 상대적으로 온도경사가 높은 영역으로 분리할 필요가 있음을 추정케 하였다. 결론적으로, 구조형태별 수화발열/냉각시 온도변화에 보다 민감한 특성두께를 정의하여, 현실적인 온도균열지수를 계산하는 과정과 방법이 필요하다고 사료된다.