• 한국전문물리치료학회지
• /
• 제26권3호
• /
• pp.32-41
• /
• 2019

Background: Limitations in hip flexion caused by tight hamstrings lead to excessive lumbar flexion and low back pain. Accordingly, many studies have examined how to stretch the hamstring muscle. However, no study has focused on the effect of hamstring eccentric exercise for tight hamstrings on trunk forward bending. Objects: We compared the short-term effect of hamstring eccentric exercise (HEE) and hamstring static stretching (HSS) on trunk forward bending in individuals with tight hamstrings. Methods: Thirty individuals with tight hamstrings participated in the study. The subjects were randomly allocated to either a HEE or HSS group. To determine whether the hamstrings were tight, the active knee extension (AKE) test was performed, and the degree of hip flexion was measured. To assess trunk forward bending, subjects performed the fingertip to floor (FTF) and modified modified Schober tests, and the degree of trunk forward bending was measured using an inclinometer. We used paired t-tests to compare the values before and after exercise in each group and independent t-tests to compare the two groups on various measures Results: The FTF test results were improved significantly after the exercise in both groups, and AKE for both legs increased significantly in both groups. There was no significant difference in the hip angles, mmS test results, or degree of trunk forward bending between groups after the exercise. No test results differed significantly between the two groups at baseline or after the exercise. Both groups increased hamstring flexibility and trunk forward bending. Conclusion: HSS and the HEE groups increased hamstring flexibility and trunk forward bending. However, HEE has additional benefits, such as injury prevention and muscle strengthening.

• 한국음향학회지
• /
• 제23권4호
• /
• pp.303-308
• /
• 2004

본 논문에서는 전력 증폭기의 선형화를 위해 제안된 feed-forward 선형화 방식을 IMT-2000용 송신 시스템에 적용한 새로운 송신 시스템 구조를 제안한다. 이 시스템에서 feed-forward 구조는 왜곡 성분을 비교하고 제거하기 위해 보조신호(reference signal)을 필요로 하는데, 이 보조신호는 무시할 정도로 낮은 왜곡을 갖도록 낮은 입력 동작 범위에서 동작하는 두 번째 변조기에서 만들어 진다. 이런 구조로 한 결과송신 시스템에서 증폭기뿐만 아니라 변조기의 왜곡을 줄일 수 있다는 큰 장점이 있다. 본 논문의 시스템은 Agilent 社의 EEsoft ADS ver.2002를 사용하여 설계하였으며, 입력은 1.98GHz 주파수 대역에서 2MHz의 주파수 간격을 갖는 2-tone으로 하였고, 약 49.95dB의 IMD 개선 특성을 얻어, 본 논문에서 제안하는 시스템은 간단함과 선형성을 동시에 제공할 수 있다는 것을 입증하였다.

• 대한의용생체공학회:의공학회지
• /
• 제30권1호
• /
• pp.10-17
• /
• 2009

Accurate electroencephalography (EEG) forward calculation is of importance for the accurate estimation of neuronal electrical sources. Conventional studies concerning the EEG forward problems have investigated various factors influencing the forward solution accuracy, e.g. tissue conductivity values in head compartments, anisotropic conductivity distribution of a head model, tessellation patterns of boundary element models, the number of elements used for boundary/finite element method (BEM/FEM), and so on. In the present paper, we investigated the influence of modeling errors in the boundary element volume conductor models upon the accuracy of the EEG forward solutions. From our simulation results, we could confirm that accurate construction of boundary element models is one of the key factors in obtaining accurate EEG forward solutions from BEM. Among three boundaries (scalp, outer skull, and inner skull boundary), the solution errors originated from the modeling error in the scalp boundary were most significant. We found that the nonuniform error distribution on the scalp surface is closely related to the electrode configuration and the error distributions on the outer and inner skull boundaries have statistically meaningful similarity to the curvature distributions of the boundary surfaces. Our simulation results also demonstrated that the accumulation of small modeling errors could lead to considerable errors in the EEG source localization. It is expected that our finding can be a useful reference in generating boundary element head models.

• The Journal of Korean Physical Therapy
• /
• 제25권5호
• /
• pp.311-315
• /
• 2013

Purpose: Forward head posture is a typical symptom in people who use computers for long periods of time. Respiration is a complex function involving co-operation of muscular, skeletal, and nervous systems. Abnormal posture can have a negative effect on respiratory function. The purpose of this study was to investigate the relationship between forward head posture and respiratory function in young adults. Methods: Forty-six healthy subjects participated in this study. Craniovertebral angle was measured for assessment of the forward head posture. The respiratory function of all subjects was evaluated by measuring forced vital capacity (FVC), forced expiratory volume at one second (FEV1), forced expiratory volume at one second/forced vital capacity (FEV1/FVC) ratio, and peak expiratory flow (PEF). The baseline of forward head posture was less than 49 degrees. Results: : Significant differences for predicted FVC and FEV1 were observed between the two groups, however, no statistically significant differences in FEV1/FVC ratio and PEF were observed between the two groups. Conclusion: Results of this study demonstrate that forward head posture has a negative effect on respiratory function in young adults.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.972-978
• /
• 2004

Forward slip is an important parameter often used in rolling-speed control models for tandem hot strip rolling mills. In a hot strip mill, on-line measurement of strip speed is inherently very difficult. Therefore, for the set-up of the finishing mill, a forward slip model is used to calculate the strip speed from roll circumferential velocity at each mill stand. Due to its complexity, most previous researches have used semi-empirical methods in determining values for the forward slip. Although these investigations may be useful in process design and control, they do not have a theoretical basis. In the present study, a better forward slip model has been developed, which provides for a better set-up and more precise control of the mill. Factors such as neutral point, friction coefficient, width spread, shape of deformation zone in the roll bite are incorporated into the model. Implementation of the new forward slip model for the control of a 7-stand hot strip tandem rolling mill shows significant improvement in roll speed set-up accuracy.

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.60-66
• /
• 2005

본 연구에서는 단일전력단 Two-Switch Forward 컨버터에 관하여 논하였다. 최근 국제적으로 제정된 ICE 61000-3-2와 IEEE 519같은 규정에서 입력 전류에 대한 고조파 규제가 강화되면서 전원 공급 장치의 역률개선 회로가 필수적으로 되었다. 따라서 본 연구에서는 저전압 대전류 출력에 적합한 방안으로 단일전력단 Two-Switch Forward 컨버터 회로를 제안하고, 모드별 동작, 특성 및 설계에 관하여 논하였으며, MOSFET를 사용하여 200[W](5[V], 40[A])급 시작품을 제작, 100[kHz]에서 실험하였다.

• 한국전문물리치료학회지
• /
• 제7권1호
• /
• pp.46-54
• /
• 2000

The purpose of this study is to determine whether movement strategies affect functional forward reach distance in a standing position. Forty-seven healthy subjects were selected for this study: 23 men and 24 women, with an average age of 22.3. Functional forward reach distances were measured as hip strategy and squat strategy (included knee and ankle movement strategy) in a standing position, respectively. The mean values of functional forward reach distance in hip strategy, squat strategy were 33.57 cm, 29.48 cm, respectively. There was significantly difference in functional forward reach distance between hip strategy and squat strategy(p<.001). There was no difference of functional forward reach distance between male and female in hip strategy, but there was significant difference in other strategy(p<.05). These results suggest that movement strategies should be considered during functional forward reach test in standing. Further study is required to determine whether movement strategies affect functional reach distance in elderly and disabled groups.

• Ocean Systems Engineering
• /
• 제6권4호
• /
• pp.305-324
• /
• 2016

Wave load prediction at zero forward speed using finite depth Green function is a well-established method regularly used in the offshore and marine industry. The forward speed approximation in deep water condition, although with limitations, is also found to be quite useful for engineering applications. However, analysis of vessels with forward speed in finite water depth still requires efficient computing methods. In this paper, a method for analysis of wave induced forces and corresponding motion on freely floating three-dimensional bodies with low to moderate forward speed is presented. A finite depth Green function is developed and incorporated in a 3D frequency domain potential flow based tool to allow consideration of finite (or shallow) water depth conditions. First order forces and moments and mean second order forces and moments in six degree of freedom are obtained. The effect of hull flare angle in predicting added resistance is incorporated. This implementation provides the unique capability of predicting added resistance in finite water depth with flare angle effect using a Green function approach. The results are validated using a half immersed sphere and S-175 ship. Finally, the effect of finite depth on a tanker with forward speed is presented.

• 대한정형도수물리치료학회지
• /
• 제21권1호
• /
• pp.43-47
• /
• 2015

Background: The purpose of this study was to identify the effects of the blood flow on carotid and vertebral artery during the forward shift on head. Methods: A 20-year female healthy subject participated in this study. This study was set up the forward shift on head at the 3cm and 6cm in a shoulder midline (acromion). Measurement method were using duplex ultrasound with colour doppler imaging for the blood flow on carotid and vertebral artery. Results: Carotid artery was increased the blood flow and vertebral artery was decreased the blood flow during forward shift on head. Conclusions: These findings suggest that carotid and vertebral artery changes to the blood flow during forward shift on head. Therefore, we should be consider that hemodynamic factor when apply to the therapeutic exercise for patients of forward head posture.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.398-404
• /
• 2017

In order to study the AC driving mechanism for OLED lighting, the fluorescent OLEDs were fabricated and the electroluminescent characteristics of the OLEDs by AC forward bias were analyzed. In the case of the driving method of OLED by AC forward bias under the same voltage and the same current density, degradation of luminescent characteristics for elapsed time progressed faster than in the case of the driving method by DC bias. These phenomena were caused by the peak voltage of AC forward bias which is ${\sqrt{2}}$ times higher than the DC voltage. In addition, the degradation of the OLED was accelerated because the AC forward bias had come close to the upper limit of the allowable voltage range even though the peak voltage didn't exceed the allowable range of the OLED. However, the fabricated fluorescent OLED showed little degradation of OLED characteristics due to AC forward bias from 0 V to 6.04 V. Therefore, OLED lighting by AC driving will become commercialized if sufficient luminance is realized at a voltage at which the characteristics of the OLED are not degradation by the AC driving method.