• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.226-230
• /
• 1996

A small amount of fine particle graphite was added to $\alpha$-SiC and $\beta$-SiC having certain particle distributions, and they were mixed clay and frit. After forming, they were sintered at 140$0^{\circ}C$ for 3 hours. Tribological properties of sintered $\alpha$-SiC-$\beta$-SiC-graphite-clay (frit) system showed that kinetic friction coefficient was 0.108, specific wear rate was 1.3${\times}10^-8\;mm^2$.$kgf^1$, and torque was 0.01kgf.cm at the wrench torque of 100 kgf.cm.

• Journal of the Korean Ceramic Society
• /
• v.21 no.1
• /
• pp.5-10
• /
• 1984

$eta$-Sialon synthesis was investigated via the simulataneous reduction and nitriding of Wando pyrophyllite. When Wando pyrophyllite-graphite-$Si_3N_4$ seed mixture was heated at 135$0^{\circ}C$ for as long as 10 hours in 80% $N_2$-20%$H_2$ atomsphere $eta$-$Si_3N_4$ solid solution was mainly formed together with a small amount of $\alpha$-$Si_3N_4$ The value z of the forming $Si_{6-x}Al_2O_2N{8-z}$ was decreased with heating time.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.57-61
• /
• 1999

Springback after forming is the critical factor affecting the product quality. It is very difficult to predict the amount of springback not only because of complex geometry and material characteristics of the stamping product but because the methodology has not been established. In this study springback mechanism is introduced and experimental tryout and computer simulation are carried out for die design of automotive rear side frame. Futher springback was verified by comparing the result of computer simulation with the measured tryout result.

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.34-40
• /
• 1993

ORMOSIL was synthesized with inorganic precursor, TEOS and organic precursor, PDMS, and the variation of composite properties according to the concentration of HCl, solvent content and reaction time were studied. As the concentration of HCl increased, condensation reaction was well proceeded and more regularly distributed network was observed. Increase in reactivity was found with the amount of solvent, and composite had a tendency of forming more porous microstructure as reaction time was increased, which had no influence on the bonding degree.

• Archives of Pharmacal Research
• /
• v.13 no.3
• /
• pp.285-288
• /
• 1990

The polysaccharide fraction from the rhizome of Trichosanthes kirilowii (Cu-curbitaceae) showed marked antitumor and cytotoxic activity with immunopotentiating activity. It was evidenced by the increase in the number of circulating leucocytes and peritoneal exudate cells and the recovery of lowered antibody forming activity in mice. The polysaccharide was mainly composed of glucose, galactose, fructose, manmose and xylose and a small amount of protein.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.347-351
• /
• 1998

Dynamic programming is applicable to any situation where items from several groups must be combined to form an entity, such as a composite investment or a transportation route connecting several districts. The most desirable entity is constructed in stages by forming sub-entities that are candidates for inclusion in the most desirable entity are retained, and all other sub-entities are discarded. In the paper, the fuzzy dynamic programming is applied to the situation where each investment in the set has the following characteristics : the amount to be invested has several possible values, and the rte of return varies with the amount invested. Each sum that may be invested represents a distinct level of investment , and the investment therefore has multiple levels. A numeric example constructing a combination of multilevel investments is given in the paper.

• Journal of Powder Materials
• /
• v.3 no.2
• /
• pp.97-103
• /
• 1996

The densification of the compacts of pure Co, Fe+50%.Co and Fe+25% Co sintered under H$_2$ gas or in vacuum was investigated. The effects of AL, Nb, Ti, and V additions on the densification were also studied. The sintered compact of Co was fully-dense when the density of the compact was lower than $Dg^c$. However, above $Dg^{c}$, it was never fully-dense regardless of sintering atmosphere, temperature, and time. The densification of sintered compacts of Fe-50% Co and Fe-25% Co were always incomplete. While the addition of AL made all compacts fully-dense, the addition of Ti was effective for the compacts of Co and Fe-25% Co. V was effective only for the Fe-25% Co. These results tell us that the particle size of Co powder, the amount of Fe, and the amount of additives forming stable oxides play on important role for the complete densification. Therefore it is desirable to reduce or eliminate the equilibrium pressure of H$_{2}$O or CO in isolated pores to obtain a fully-dense sintered compact.

• Ceramist
• /
• v.22 no.3
• /
• pp.301-315
• /
• 2019

We prepared hybrids between layered double hydroxide (LDH) and natural plant extract such as Peaonia suffruticosa Andrews (PS) and Peaonia Japonica (PJ) which was confirmed anti-bacterial activity through paper disc diffusion assay. According to X-ray diffractometer, scanning electron microscope, zeta-potential measurement and quantification of extract loading amount in hybrids, we confirmed that similar amount of PS and PJ loaded on inter-particle pore of LDH with partial adsorption on surface of LDH through reconstruction process. We also evaluated the bacterial colony forming inhibition of PS extract, PJ extract, PS-LDH and PJ-LDH hybrids against Escherichia coli as gram negative bacterium and Bacillus subtilis as gram positive bacterium, suggesting that both hybrids have enhanced anti-bacterial activity compared with extract itself.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.171-175
• /
• 1998

$Al_2O_3$-TiC composites were prepared from aluminum, titanium oxide, and carbon fibers by self-propagating high-temperature synthesis(SHS). After the SHS reaction, the TiC phase in the sample was found either fibrous or non-fibrous shape. The fraction of the fibrous TiC phase varied with the amount of $Al_2O_3$ diluent addition. The optimum amount of diluent to make fibrous carbide was determined to be 30%. The fibers were hollow inside and made of multiple grains with a composition of titanium carbide. The hollow fiber formation mechanism was suggested and discussed. The synthesized powders were consolidated to dense composites by hot pressing at $1750^{\circ}C$ under 30 MPa.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.6
• /
• pp.342-345
• /
• 2004

In this work, a new method of measuring volume fraction of deformation-induced ${\varepsilon}$ martensite is proposed using endothermic heat on reverse transformation. As grain size increases, the amount of ${\varepsilon}$ martensite forming on cooling increases. However, with a decrease in grain size, more ${\varepsilon}$ is induced by deformation, improving shape memory effect.