• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.267-268
• /
• 2012

Soot formation and oxidation characteristics of air-diluted propane diffusion flames have been experimentally investigated under the elevated pressure conditions. PAH concentrations showed more pressure sensitive behavior comparing to soot volume fractions. The flame/soot temperatures in soot oxidation region were obtained using the MOLLIP technique. Under the complete soot oxidation environment, the flame/soot temperature is increased with pressure. The increased temperature could accelerate the soot oxidation process and then exothermic oxidation reaction, in turn, could further raise the flame/soot temperature, which would result in the enhancement of soot oxidation process.

• 동굴
• /
• 제78호
• /
• pp.1-8
• /
• 2007

The combination of mechano-chemical activation (MCA)and Self-propagating High-temperature Synthesis (SHS) has widened the technical possibilities for both methods. For YBCO systems the investigation showed that a short-term MCA of initial powders before SHS leads to single-phase and ultra-fine products. A new technique for preparation ultra-fine high-temperature superconductors (HTS) of YBCO composition with a grain size d <1m is developed using combination of MCA and SHS. The specific feature of the technique is formation of the $YBa_2Cu_3O_7-$ crystalline lattice directly from an X-ray amorphous state arising as a result of mechanical activation of the original oxide mixture. The technique allows the stage of formation of any intermediate reaction products to be ruled out. X-ray and magnetic studies of ultra-fine high temperature superconductors are carried out. Dimension effects associated with the microstructure peculiarities are revealed. A considerable enhancement of inter-grain critical currents is found to take place in the ultra-fine samples.

• 한국입자에어로졸학회지
• /
• 제6권1호
• /
• pp.1-7
• /
• 2010

Generally, large amounts of DOP(Di-Octyl Phthalate) chemicals are used as plasticizers in PVC compound manufacturing processes. However, it is very important to collect DOP species immediately from a workplace in order to protect worker's heath and recover them. To accomplish these objectives, we need to understand the droplet formation and growth mechanisms of DOP species. In this study, two important parameters such as temperature gradient and residence time were considered to clarify these mechanisms. We found that residence time is very critical to determine the droplet size distribution of DOP, whereas temperature gradient in general operating conditions(less than $-6.8^{\circ}C/cm$) is negligible.

• 한국수산과학회지
• /
• 제42권3호
• /
• pp.297-301
• /
• 2009

The water temperature from 1980 to 2000 and the anchovy catch from 1990 to 2000 in the southeastern portion of the South Sea of Korea were used to illustrate the influence of water temperature on the catch of the anchovy, Engraulis japonica. 1993 and 1998 were selected as poor and good fishing years therefore, the horizontal and vertical distribution of water temperature and catch per unit effort in these years was compared. When the anchovy catch was lower, the water temperature at 10 m was also about $0-2^{\circ}C$ lower than during a normal year, which resulted in the formation of a weak thermocline. Conversely, when the anchovy catch was higher, the water temperature at 10m was $0-2^{\circ}C$ greater than during a normal year, which resulted in the formation of a strong thermocline at around 20 m.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.356-359
• /
• 1997

The Effects of different melting temperature and holding time in the melting temperature on J$\sub$c/ of YBa$_2$Cu$_3$O$\sub$x/ based superconducting bulk using MPMG process were investigated. the value of critical current density was the largest at l120$^{\circ}C$, the melting temperature which is appointed to the mid point of (Y$_2$BaCuO$\sub$5/ + Liquid)region. With the melting temperature in which the value of J$\sub$c/ is the largest, J$\sub$c/ was again measured to see whether the holding time at this proper melting temperature has the effect on the critical characteristics. From the result above it was concluded that the melting temperature and holding time were important to improve the J$\sub$c/ and the formation of the Y$_2$BaCuO$\sub$5/. In this paper, the melting temperature obtained was l120$^{\circ}C$ and propel holding time could be obtained as 20 minute and the more holding time was not effective in the J$\sub$c/ improvement as well as the formation of Y$_2$BaCuO$\sub$5/.

• Environmental Engineering Research
• /
• 제11권4호
• /
• pp.217-231
• /
• 2006

The gas-phase formation of polychlorinated naphthalenes (PCNs) and dibenzofurans (PCDFs) was experimentally investigated by slow combustion of the three chlorophenols (CPs): 2-chlorophenol (2-CP), 3-chlorophenol (3-CP) and 4-chlorophenol (4-CP), in a laminar flow reactor over the range of 550 to $750^{\circ}C$ under oxidative condition. Contrary to the a priori hypothesis, different distributions of PCN isomers were produced from each CP. To explain the distributions of polychlorinated dibenzofuran (PCDF) and PCN congeners, a pathway is proposed that builds on published mechanisms of PCDF formation from chlorinated phenols and naphthalene formation from dihydrofulvalene. This pathway involves phenoxy radical coupling at unsubstituted ortho-carbon sites followed by CO elimination to produce dichloro-9, 10-dihydrofulvalene intermediates. Naphthalene products are formed by loss of H and/or Cl atoms and rearrangement. The degree of chlorination of naphthalene and dibenzofuran products decreased as temperature increased, and, on average, the naphthalene congeners were less chlorinated than the dibenzofuran congeners. PCDF isomers were found to be weakly dependent to temperature, suggesting that phenoxy radical coupling is a low activation energy process. Different PCN isomers, on the other hand, are formed by alternative fusion routes from the same phenoxy radical coupling intermediate. PCN isomer distributions were found to be more temperature sensitive, with selectivity to particular isomers decreasing with increasing temperature.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.153-158
• /
• 2008

Fe-aluminides have the potential to replace many types of stainless steels that are currently used in structural applications. Once commercialized, it is expected that they will be twice as strong as stainless steels with higher corrosion resistance at high temperatures, while their average production cost will be approximately 10% of that of stainless steels. Self-propagating, high-temperature Synthesis (SHS) has been used to produce intermetallic and ceramic compounds from reactions between elemental constituents. The driving force for the SHS is the high thermodynamic stability during the formation of the intermetallic compound. Therefore, the advantages of the SHS method include a higher purity of the products, low energy requirements and the relative simplicity of the process. In this work, a Fe-aluminide intermetallic compound was formed from high-purity elemental Fe and Al foils via a SHS reaction in a hot press. The formation of iron aluminides at the interface between the Fe and Al foil was observed to be controlled by the temperature, pressure and heating rate. Particularly, the heating rate plays the most important role in the formation of the intermetallic compound during the SHS reaction. According to a DSC analysis, a SHS reaction appeared at two different temperatures below and above the metaling point of Al. It was also observed that the SHS reaction temperatures increased as the heating rate increased. A fully dense, well-bonded intermetallic composite sheet with a thickness of $700\;{\mu}m$ was formed by a heat treatment at $665^{\circ}C$ for 15 hours after a SHS reaction of alternatively layered 10 Fe and 9 Al foils. The phases and microstructures of the intermetallic composite sheets were confirmed by EPMA and XRD analyses.

• 해양환경안전학회지
• /
• 제29권4호
• /
• pp.356-362
• /
• 2023

기후 변화에 따른 위험성은 전 세계적으로 오랜 기간 강조되고 있으며, 이를 극복하기 위한 노력은 해운분야에서도 국제해사 기구를 중심으로 이어지고 있다. 연소과정에서 발생한 매연을 제어하기 위하여 매연 생성 특성에 관한 연구는 필수적이다. 본 연구에서는 에틸렌 가스를 기반으로 한 대향류 확산화염에서 불활성 기체인 질소를 혼합하여 화염온도, 화염형태, 매연 생성 관련된 화학종의 상태변화를 확인하기 위해 광소멸법과 화학반응 수치해석을 수행하였다. 연구 결과. 질소의 혼합비율이 증가함에 따라 화염온도 감소와 매연체적분율 감소로 이루어졌다. 매연 입자가 분포하는 구간도 감소하였으며, 30% 이상 혼합비율이 높아지면 체적분율 감소율이 감소하였다. 매연 성장에 관여하는 화학종들의 몰분율도 감소하였다. HACA 반응 관련 화학종은 탄화수소 연료 비율에 따라 영향을 받으나, 홀수탄소 경로 관련 화학종은 탄화수소 연료 비율뿐만 아니라 화염온도 영향을 받는 것을 확인하였다.

• Applied Biological Chemistry
• /
• 제27권1호
• /
• pp.34-39
• /
• 1984

합성배지(合成培地)에서 팽나무버섯균(菌)의 균사생육(菌絲生育)과 자실체형성(子實體形成)에 대한 환경적(環境的) 특성(特性)을 검토(檢討)하였다. 균사생육(菌絲生育)은 광조사(光照射)에 의하여 저해(沮害)되었으나 자실체형성(子實體形成)은 촉진(促進)되었으며, 자실체형성(子實體形成)을 위한 광(光)의 최적조도(最適照度)는 $100{\sim}1000lux$이고, 이때의 조사시간(照射時間)은 매일 $4{\sim}8$시간이었다. 균사생육(菌絲生育)과 자실체형성(子實體形成)의 최적온도(最適溫度)는 각각 $25^{\circ}C,\;15^{\circ}C$이었으며 최적(最適) pH 범위(範圍)는 각각 $5.0{\sim}7.5,\;5.0{\sim}6.0$이었다. 저온처리(低溫處理)에 의한 균사체형성(菌絲體形成)은 $15^{\circ}C$에서는 12시간, $5^{\circ}C$와 $19^{\circ}C$는 48시간이었으며, $15^{\circ}C$에서 더 효과적(效果的)이었다. 균사(菌絲)는 $7{\sim}10$일간(日間) 배양(培養)했을 때가 자실체형성(子實體形成)과 수율(收率)이 좋았다.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.8-18
• /
• 2010

When metal oxides are exposed to chemical potential gradients, ions are driven to diffusive mass transport. During this transport process, the divergence of ionic fluxes offers the formation/annihilation of oxides. Therefore, the divergence of ionic flux may play an important role in the void formation in oxides. Kinetic equations were derived for describing chemical potential distribution, ionic fluxes and their divergence in oxides. The divergence was found to be the measure of void formation. Defect chemistry in scales is directly related to the sign of divergence and gives an indication of the void formation behavior. The quantitative estimation on the void formation was successfully applied to a growing magnetite scale in high temperature oxidation of iron at 823 K.