• 한국세라믹학회지
• /
• 제14권4호
• /
• pp.248-255
• /
• 1977

The effect of firing temperature, soaking time and batch composition upon the glass phase and pore formation as well as their distribution in slag foamed glass was investigated. Sulfur dioxide gas produced by the oxidation and reduction of metal sulfide in waterslag was attributed to foam forming agent. Slag foamed glass matrix was mainly composed of 35~60% glas phase and melilite crystalline phase. The increment of bentonite addition in batch lowered the foam forming temperature in studied system. The result showed also that the foam size distribution was broadened as th firing temperature wa inbereased.

• 설비공학논문집
• /
• 제18권7호
• /
• pp.596-602
• /
• 2006

Ice adhesion and blockage problems have been issued in continuous ice slurry making process. So we composed continuous ice slurry making device using a commercial small plate heat exchanger (PHX), and investigated character of ice formation. An experiment of ice formation was peformed with an aqueous solution of ethylene glycol 7 mass%. In the experiment, the effect of the pressurization on ice slurry formation during the cooling process was investigated. The pressurization test for the aqueous solution was performed by setting valves at the PHX inlet and outlet. At the results, the time of continuous ice formation increased as the pressure of the plate heat exchanger increased for cooling temperature of $-5^{\circ}C$. Also continuous ice formation at the cooling temperature of $-7^{\circ}C$ showed a possibility. It was found that the pressurization may contribute to suppress the dissolution of supercooled aqueous solution in the PHX.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.42-46
• /
• 2017

The effects of the heat treatment temperature ($600^{\circ}C-1050^{\circ}C$) on the formation of $MgB_2$ and the superconducting properties have been examined. The self-synthesized $MgB_4$ and commercial Mg powders were used as raw materials for the formation of $MgB_2$. The superconducting critical temperatures ($T_cs$) of $MgB_2$ bulk superconductors prepared at $600^{\circ}C-850^{\circ}C$ were as high as 37-38 K regardless of the heat treatment temperature. However, because $MgB_4$ is more stable than $MgB_2$ at above $850^{\circ}C$, no superconducting signals were detected in the susceptibility-temperature curves of the samples prepared above $850^{\circ}C$. As for the critical current density ($J_c$), the sample heat-treated at a low temperature ($600^{\circ}C$) for a prolonged period (40 h) showed a Jc higher than those prepared at $650^{\circ}C-850^{\circ}C$ for a short period (1 h). The FWHM (full width at half maximum) result showed that the grain size of $MgB_2$ of the $600^{\circ}C$ sample was smaller than that of the other samples. The high $J_c$ of the $600^{\circ}C$sample is attributed to the presence of large numbers of grain boundaries, which can act as flux pinning centers of $MgB_2$.

• 소성∙가공
• /
• 제22권8호
• /
• pp.456-462
• /
• 2013

Compression tests were conducted at the various temperatures and strain rates to investigate void formation and microstructures behavior of a 1.9wt%C ultrahigh carbon steel used in forged workrolls. The microstructure, grain size and volume fraction of cementite were determined using specimens deformed in the temperature range from 800 to $1150^{\circ}C$ and strain rates from 0.01 to 10/s. It was found from the microstructural analysis that the grain size is larger at higher temperatures and lower strain rate deformation conditions. In addition, a higher volume fraction of cementite was measured at lower temperatures. The brittle blocky cementite was fractured at $800^{\circ}C$ and $900^{\circ}C$ regardless of strain rate. As a result, numerous new micro voids were formed in the fragmented blocky cementite. It was also found that local melting can occur at temperatures of more than $1130^{\circ}C$. Therefore, the forging temperature should be controlled between $900^{\circ}C$ and $1120^{\circ}C$. The temperature rise, which depends on the anvil stroke and velocity, was estimated through cogging simulation to find the appropriate forging temperature and to prevent local melting due to plastic work.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1529_1530
• /
• 2009

The process conditions for fabricating p-type silicon pillars were optimized by controlling current density, bath temperature. To get best process flexibility for pillar arrays formation, three factors affecting pillar formation were changed. First, the solution bath was designed to keep constant temperature during the experiment irrespective of external temperature. Second, the counter Pt electrode was changed from rod type to mesh to obtain uniform distribution of current density. Third, Cr-Cu alloy electrode instead of Cu was used to increase electrode current density.

• 한국미생물·생명공학회지
• /
• 제22권2호
• /
• pp.115-119
• /
• 1994

White mutant of Ganoderma lucidum(G4142) induced the non-basediocarpous basidiospores(NBB) from the aerial mycelia on agar media by the light illumination. Light was found to be necessary for NBB formation, but it also inhibited the growth of mycelium. The best sporulation was obtained at the periodic exposure of 16 hour light and 8 hour dark. Blue and yellow light were the most effective on sporulation, however, near UV and red light did not induce any spores. Effective light intensity for NBB bearing was about 1,000 lux as white light. Even after 16 days of culture, this strain did not form the pinhead nor chlamydospore. Optimum temperature for the mycelial growth and NBB formation were 30$\circ $C. Ganoderma lucidum G4142 exhibited the formation of stroma after five days of incubation at 30$\circ $C.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.55-58
• /
• 2002

To control the frost formation, a temperature variation of the cooling plate and characteristics on hydrophilic and hydrophobic surfaces was attempted. As a temperature variation of the cooling plate, being closely related to the frost layer density of frost layer is found to be affected by the melting process inside the frost layer during the heating period. At characteristics on surface, completely different structures of frost are appeared in the initial stage of frost formation due to the difference in surface conditions, while those effects are vanished with time. It is found that the frost thickness, density and heat flux characteristics are closely associated with the frost structure.

• 열처리공학회지
• /
• 제33권6호
• /
• pp.296-302
• /
• 2020

Magnesium alloys have been rapidly attracting as lightweight structural material in various industry fields because of having high specific strength and low density. It is well known that the crystallographic texture plays an important role in improvement of poor room temperature ductility of magnesium alloys. In this study, high-temperature plane strain compression deformation was conducted on extruded AZ80 magnesium alloy at 723K by varying the strain rates ranging from 5.0×10^-3s^-1 to 5.0×10^-2s^-1 in order to investigate the behaviors of texture formation. It was found that texture formation behaviors in three kinds of specimens were affected by continuous and discontiuous deformation mechanism.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.65-66
• /
• 2023

This study is aimed to understand the effect of pyrolysis temperature on the biochar synthesis for shape stabilizing the Lauric acid (LA). Three different temperatures (350, 500, and 650 ℃) have been chosen with a soaking time of 1h for synthesizing biochars form sesame plants (SP). The structural characterizations indicate the formation of amorphous biochar at 350 ℃ whereas, a stain of graphene formation has been observed for the biochar synthesized at 500 ℃. Formation of a substantial amount of graphene has been found for the sample, synthesized at 650 ℃. Energy storage performances of the PCMs which are shape stabilized by these three biochars have been discussed in this paper.

• 한국광물학회지
• /
• 제4권1호
• /
• pp.32-42
• /
• 1991

직운산층의 열적변성도를 밝히기위해 일라이트의 '결정도'와 녹니석의 화학성분을 이용하였다. 직운산층의 일라이트 '결정도'값은 Weaver index로는 4.48에서 32.5에 이르며, Kubler index로는 $0.14{{\Delta}{\circ}}\;2{\Theta}$에서 $0.03{{\Delta}{\circ}}\;2{\Theta}$에 이른다. 대부분의 일라이트 '결정도'값은 epizone의 영역 (K. I.< $0.21{{\Delta}{\circ}}\;2{\Theta}$)에 속한다. 직운산층 녹니석에 의해 계산된 온도와 그 화학 분석치(Fe/(Fe+Mg)=0.45, Tet. Al/Octa. Al=0.84, the calculated temperature=250-270${\circ}C$)는 기존의 epizone 녹니석의 연구결과와 잘 일치한다. 이 연구의 결과는 직운산층의 변성정도가 epizone에 속하고 직운산층은 과거에 적어도 300${\circ}C$의 온도에 도달했다는 것을 나타낸다.