• 한국건설관리학회논문집
• /
• 제19권6호
• /
• pp.3-13
• /
• 2018

거푸집공사비는 건축공사비의 10~15%, 골조공사비의 30~40%로, 건축공사에서 차지하는 비중이 상당하다. 또한 거푸집 붕괴로 인한 사망재해가 빈번하게 발생하고 있어, 다른 공종에 비하여 상대적으로 재해강도가 높은 공종이라 할 수 있다. 이처럼 건설 프로젝트에서 거푸집을 설계할 때 정확한 물량산출과 구조계산은 매우 중요한 사항이다. 따라서 본 연구에서는 거푸집설계를 용이하게 하기 위하여 거푸집공사에 관련된 새로운 IFC Entity를 제안하였으며, "개방형 BIM 거푸집설계 프로토타입"을 개발하였다. 본 연구에서 제안하는 거푸집설계 접근법은 시공 관리자로 하여금 정확한 물량산출과 신속한 계획 및 시공을 수행하는데 도움을 줄 것으로 기대된다. 하지만 본 연구는 소규모 특정건축물과 유로폼 만을 대상으로 수행하였기 때문에, 그 외의 건축물의 거푸집공사에 적용하기에는 한계가 있고, 범용적으로 거푸집공사에 적용하기 위해서는 추가적인 연구가 필요할 것이다.

• 약학회지
• /
• 제57권3호
• /
• pp.205-212
• /
• 2013

Dissolution test has been performed to control drug quality and to predict in vivo drug release profile of solid dosage forms, so there's a drift towards setting dissolution test instead of disintegration test. However, some solid dosage forms in Korea Pharmaceutical Codex (KPC) are not established the dissolution test yet, so these monographs are necessary to set the specification of dissolution test. In this study, we developed the specification and test method of dissolution test for itopride hydrochloride tablets and tiropramide hydrochloride tablets which are not established the dissolution test yet. According to the "Manual for Guideline Application for Validation of Analytical Procedures" and "Guidelines on Specification of Dissolution test for Oral dosage form" of Korean Pharmacopoeia (KP), we validated and established each development method. Based on the preliminary dissolution profile, we set the dissolution condition(paddle apparatus, pH 1.2 media, 50 rpm). For this condition, we performed the main dissolution test to determine the specification (45 min, 85%). Finally, we validated each analytical method by specificity, linearity, accuracy and precision. These developed methods will be included the next supplement of KPC and also contributed to the quality control of medicines.

• 한국수자원학회논문집
• /
• 제43권9호
• /
• pp.823-833
• /
• 2010

침수식생 개수로 흐름은 식생영역과 상부영역에 서로 다른 흐름구조를 보인다. 즉, 식생영역에서 전단으로 인해 생성되는 난류는 억제되며 비교적 균일한 유속 분포를 보이며 상부영역에서는 일반 개수로 흐름과 유사한 흐름구조를 보인다. 이와 같이 두 상이한흐름구조가 결합된 복잡한 흐름특성으로 인해 침수식생 개수로흐름은 공학적인 관심의 대상이 되어왔다. 본 연구에서는 침수식생 개수로 흐름의 층적분 모형의 비교 분석을 수행하였다. 일반적으로 식생흐름의 층적분 모형은 층의 수에 따라 2층 및 3층모형으로 구분한다. 즉, 전체 수심을 식생영역과 상부영역으로 구분하는 2층모형과 식생영역을 바닥 조도의 영향 유무에 따라 내부 및 외부 식생영역으로 구분하는 3층모형으로 분류된다. 본 연구에서는 2층모형과 3층모형을 비교하였다. 다양한 실험조건에 적용한 결과, 3층모형이 식생영역에서 유속의 변화를 고려할 수 있으나 결과는 레이놀즈응력 분포에 민감하며, 적분된 유속은 2층모형에 의한 예측 결과가 더욱 정확한 것으로 나타났다. 3층모형에서 내부 식생영역의 결과가 전체 흐름구조에 미치는 영향이 무시할 수 있으므로 이 점을 착안하여 식생영역에서 유속 변화가 고려되는 수정 2층모형을 제시하였다. 수정 2층모형에서 가정하는 레이놀즈응력 분포는 상부영역에서는 선형, 식생영역에서는 멱함수 형으로 변화한다. 다양한 조건에 적용한 결과, 수정 2층모형이 대체로 기존의 모형과 비슷한 정도의 예측을 수행하나 식생밀도가 매우 작은 흐름의 경우 예측 결과가 불량한 것으로 나타났다.

• 한국ITS학회 논문지
• /
• 제10권2호
• /
• pp.22-34
• /
• 2011

본 논문은 고속도로 톨게이트에서 통행 요금징수로 인해 교통지체가 발생할 때 이를 최소화하기 위해 자동요금징수시스템을 설치하는 경우 차량들의 통과시간이 어떻게 변화하는지 분석한 연구결과를 제시하고 있다. 본 연구에서는 이 설치효과를 톨게이트를 빠져나가는 차량들의 통과시간 감소 편익이라고 생각했으며, 차량의 통과시간을 분석하기 위해 다중서비스 대기행렬 이론을 적용해서 분석하였다. 본 연구에서 분석한 결과, 톨게이트로 진입하는 차량들의 입차 간격이 Poisson 분포를 따르고, 자동요금징수시스템의 서비스 시간이 지수 분포를 따를 때 다중서비스 대기행렬이론을 적용하여 차량들의 통과시간을 분석하는 것이 바람직하다는 것과, 자동요금징수시스템을 설치하더라도 통행 요금을 징수하는데 걸리는 시간이 다르기 때문에 톨게이트 출구 쪽이 입구 쪽보다 통과시간 감소효과가 더 크게 나타난다는 것, 그리고 자동요금징수시스템을 설치한다고 해서 항상 톨게이트를 통과하는 시간이 감소하는 것은 아니며, 자동요금징수시스템 차로에 너무 많은 차량들이 몰리는 경우 오히려 톨게이트 전체로 볼 때는 차량당 통과시간이 증가한다는 것을 밝혔다. 끝으로 본 연구에서는 다중서비스 대기행렬이론의 정확성을 판단하기 위해 실제로 톨게이트 현장조사에서 통과 차량들의 평균 통과시간을 조사해서 모형 값과 비교했는데, 그 결과 모형 값과 실측 값은 약 1~3초 정도의 미소한 차이만을 보여서 다중서비스 대기행렬이론을 실무에 적용해도 좋다는 결론을 얻었다.

• 한국지반공학회지:지반
• /
• 제1권1호
• /
• pp.59-72
• /
• 1985

본 논문은 Biot의 압밀이론을 유한요소법에 의해 해석하는 데 있어 수정 Cam-clay model과 해석 기법으로서는 Christian Boehmer방법을 사용한 것이다. 특히 본 해석에 있어서 압밀의 시간간격과 요소의 분할은 정도와 경제성의 관점에서 연구하였다. 나아가 본 프르그램의 정확을 조사하기 인하여 본 프로그램에 Terzaghi의 정해에 의한 일차원추밀의 해석을 시도하여 그 정상성을 확인하고 또한 Magnan이 연구목적으로 수행한 프랑스의 Cubzac-les-ponts에서 시험성토의 결과와 비교하였다. 본 연구에서 얻은 주요결론은 다음과 같다. 1. 일차원압밀의 평우에 배수층에 가까이 갈수록 요소를 세분하면 수치해석에서 더 높은 결과를 얻을 수 있다. 2. 상간간격에 대해서는 1 log cycle당 20회로 하면 안정된다. 3. 긴 배수거리를 갖는 요소에서는 Mandel-cryer 효과가 시간지연과 더불어 일어난다. 4. 본 프로그램에 의해 예측된 초기하중 단계에서 축변위는 성토하중으로 산하는 것 보다도 강성을 주는 Mesh화한 것이 관측치와 잘 일치한다. 5. 본 프로그램에 의해 예측된 간극수압은 Magnan결과와 비교해 볼 때 관측치와 더 잘 일치 한다.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.245-263
• /
• 1997

For twelve solvent thinners, evaporation rates of components were investigated and models to estimate the actual concentration have been evaluated. Also, the current ACGIH TLVs (Threshold Limit Values) for the concentration of organic mixtures have been adjusted. The results of this study are summarized as follows : 1. Airborne concentrations of solvent thinner components were related to their respective vapor pressure (r=0.96). On the other hand, there was no significant relation between the concentrations in the air of the thinner compounds and the original amount in liquid form. 2. Airborne concentrations of each chemical were estimated by temperature at $8.5{\pm}1$, $16.7{\pm}1$ and $31.5{\pm}2^{\circ}C$ with an air velocity of 1.5 m/s. The concentrations were increased by increasing temperature (p<0.05). The percentage of concentrations were proportionate to their respective percentage of vapor pressure. Among the chemicals studied, n-butyl acetate, n-butyl alcohol, m-xylene, p-xylene and o-xylene showed a clear relationship to temperature. 3. Airborne concentration of each chemical was estimated by air velocity at 0.05, 1.50 and 2.50 m/s, with a constant temperature at $17{\pm}2^{\circ}C$. The concentrations were increased by increasing air velocity (p<0.05). The percentage of concentrations were proportionate to their respective percentage of vapor pressure. Among the chemicals studied, n-butyl alcohol, m-xylene and p-xylene showed a clear relationship to velocity. 4. In estimating the concentrations of solvent thinners by temperature and air velocity, ACGIH TLVs for mixtures tended to be larger than the values obtained by ACGIH exposure index. It shows that ACGIH TLVs for mixtures are not adequate for evaluating the airborne concentration of thinners and other organic mixtures. 5. The evaporation rate of the thinners were compared to the theoretical equations of Hummel, Braun and Mackay. The Hummel and Braun methods were close to exposure index but Makay's showed an underestimated value. In order to see the accuracy of each three models, the SSE (Error Sum of Squares) calculated for Hummel's was 1.73, being the closest to the actual values. 6. Present ACGIH TLVs for mixtures are not appropriate evaluate industrial environments. In this study, a correction of TLVs using vapor pressure of respective components was suggested. In order to evaluate the corrected TLVs a paired t-test was performed. There was no significant difference between the exposure index and the concentration over suggested TLVs (p>0.05). Thus, this corrected TLVs seem appropriate in order to evaluate actual industrial workplaces organic chemical concentration in the air.

• 건축역사연구
• /
• 제19권1호
• /
• pp.91-104
• /
• 2010

Korea's stone buildings are varied in their types such as stone pagodas, stone lanterns, stone bridges, stoneworks, etc. These account for more than 30% over the entire cultural properties, but research achievements are lacking compared to wooden buildings. Accordingly, this study aims to identify the shape, role and transition of Tapgu, which had been used to set up boundary at a stone pagoda, one of the stone buildings. The 20th stone pagodas, which have relative accuracy in its forming year, have been studied around national treasure or treasure between 7th century and 9th century. There are a lot of different opinions about the role and meaning of Tapgu, and at this writer's option, Tapgu is defined as follows: First, each structure plays a different role. A structure to pass the load in the upper part to the ground can be seen as a stair or a pedestal, but a structure to form double foundations can be considered as Tapgu. Second, Tapgu can be used to divide areas with stones or stepping stones. As a result, the shape, role and transition of Tapgu is as follows: Firstly, when it comes to its shape, Tapgu includes flagstone type, belt type, double foundation type, compound type. Flagstone type had been used to set up boundary at stone pagodas by using foundation stone, belt type by keeping apart from stone pagodas, and double foundation stone by installing dual foundation stones. Secondly, Tapgu is considered to set up boundary in the case of flagstone and plate stone, and acts like a structure which can prevent surrounding area of stone pagoda from coming up while being stuck around stone pagodas. Belt type was installed only for the purpose of forming boundary. At the bottom, double foundation stone had been used to pass the load in the upper part to the ground in the same way as the foundation stone in the upper part, and the boundaries were set varying the size. Thirdly, when it comes to the transition of Tapgu, flagstone type of boundary stone had been installed in the 7th century, and belt type of boundary stone had been mainly installed in the 8th century. And double foundation stone had been installed in the 9th century. Comprehensively, flagstone type and belt type had been made around the 7th and 8th century when Tapgu was regarded important and stone pagoda started to be built. At the turn to the 9th century, the role of Tapgu had been increasingly losing in the construction of stone pagoda, and foundation stone started to appear.

• 기본간호학회지
• /
• 제3권1호
• /
• pp.37-49
• /
• 1996

The Purposes of this study were to understand the types of appellations used by nurses and doctors for patients in a hospital and to analyze satisfaction and reason about appellation for patient. This would enable us to provide basic data on culturally suitable appellations for admitted patients. 454 patients at K University hospital in Seoul were subjects for this study. Subjects were interviewed individually using a questionnair and frequency $X^2-test$. Results are as follows. 1. The most frequently used type of appellations in hospitals was '-ssi ; -sir' used by 88.1% of the nurses and 83.9% of the doctors. About 3 quaters of the medical staff used '-ssi' while none used job position. 2. 93.2% of the patients were satisfied with the appellations used by nurses and 93.0% of the patients were satisfied with the appellations used by the doctors 43.7% didn't think appellations were important and 44.3% thought it natural to use the appellation. The most satisfactory form of appellation used by nurses was '-ssi' to 93.3% of patients. All were satisfied with '-nim ; -sir', '-teacher' and there was no statistically significance. On the other hand, the level of satisfaction and the appellation used by doctors showed a relationship($X^2=19.72$, p=.000). Every patient was satisfied with '-nim' and '-teacher' but 19.9% were dissatisfied with the others of appellations. 3. Most patients preferred to be called '-ssi' by nurses(77.3%) and doctors(78.7%) respectively. The dominant reason being accuracy(45.8%), naturalness(33.9%) for nurses and 43.8% and 45.4% respectively for doctors. 4. The relationship between the type of appellations requested of nurses and general characteristics showed that age($X^2=83.91%$ p=.000), level of education($X^2=33.35$ p=.000), and occupation($X^2=38.22$ p=.033) were related to the type of appellation. The type of appellation requested of doctors was related to the age($X^2=72.56$ p=.000), level of education($X^2=30.01$ p=.000), and occupation($X^2$=42.90 p=.010). Generally, '-ssi' was requested of doctors and nurses, but lower age group or higher age group(over 61), those in elementary schools or elementary school graduates snd students preferred being called by their first names or grandfather, grandmother. From the results above, we can see that the most general type of appellation used for patients by the medical staff is '-ssi' and most patients were satisfied with the appellation but, the reason being that such appellations were accepted without concern. This shows that most are not adequately satisfied with the appellation. Only a small number of people use '-nim' and '-teacher' but is the preferred and frequently used types of appellation. Therfore, a continuous research of appellations used for patients with patients using '-nim' and an investigation with nurses' opinions of appellations for patients as the subject are required.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.418-418
• /
• 2008

The electrochemical etching of silicon in HF-based solutions is known to form various types of porous structures. Porous structures are generally classified into three categories according to pore sizes: micropore (below 2 nm in size), mesopore (2 ~ 50 nm), and macropore (above 50 nm). Recently, the formation of macropores has attracted increasing interest because of their promising characteristics for an wide scope of applications such as microelectromechanical systems (MEMS), chemical sensors, biotechnology, photonic crystals, and photovoltaic application. One of the promising applications of macropores is in the field of MEMS. Anisotropic etching is essential step for fabrication of MEMS. Conventional wet etching has advantages such as low processing cost and high throughput, but it is unsuitable to fabricate high-aspect-ratio structures with vertical sidewalls due to its inherent etching characteristics along certain crystal orientations. Reactive ion dry etching is another technique of anisotropic etching. This has excellent ability to fabricate high-aspect-ratio structures with vertical sidewalls and high accuracy. However, its high processing cost is one of the bottlenecks for widely successful commercialization of MEMS. In contrast, by using electrochemical etching method together with pre-patterning by lithographic step, regular macropore arrays with very high-aspect-ratio up to 250 can be obtained. The formed macropores have very smooth surface and side, unlike deep reactive ion etching where surfaces are damaged and wavy. Especially, to make vertical microwire or nanowire arrays (aspect ratio = over 1:100) on silicon wafer with top-down photolithography, it is very difficult to fabricate them with conventional dry etching. The electrochemical etching is the most proper candidate to do it. The pillar structures are demonstrated for n-type silicon and the formation mechanism is well explained, while such a experimental results are few for p-type silicon. In this report, In order to understand the roles played by the kinds of etching solution and mask patterns in the formation of microwire arrays, we have undertaken a systematic study of the solvent effects in mixtures of HF, dimethyl sulfoxide (DMSO), iso-propanol, and mixtures of HF with water on the structure formation on monocrystalline p-type silicon with a resistivity with 10 ~ 20 $\Omega{\cdot}cm$. The different morphological results are presented according to mask patterns and etching solutions.

• 전자공학회논문지
• /
• 제50권3호
• /
• pp.102-112
• /
• 2013

본 연구에서는 저 명암 대비 영상에서 잡음이 많은 육각형을 포함하는 윤곽 검출과 보완의 2단계 처리방법을 제안한다. 이 방법은 라플라시안-가우시안 필터(LGF)의 조합과 형상에 의존하는 필터의 아이디어에 기초한다. 먼저, 1단계에서는 모서리에서 특히 육각형상의 에지를 검출하기 위한 검출기로서 6개의 마스크를 갖는 알고리즘을 사용한다. 여기에서 두 개의 삼각화살 모양의 필터는 육각형의 삼각화살 모양의 접속부를 검출하기 위해 사용되고, 기타 네 개의 필터는 육각형 주변의 에지를 검출하기 위해 사용된다. 자연영상으로서 보통 규칙적인 육각형상의 각막 내피 세포를 선택하며, 이 각막 내피 세포의 형상을 자동적으로 계측하는 것은 임상진단에 있어서 중요하다. 그 유효성을 평가하기 위해 제안 방법과 기존 방법을 잡음을 포함하는 육각형 영상에 적용한다. 그 결과, 제안 알고리즘이 기존의 다른 방법에 비해 잡음에 대한 강인성과 출력 신호 대 잡음비, 에지 일치율 및 검출 정확도의 면에서 보다 양호한 검출률을 나타냈다. 다음으로, 2단계에서는 에너지 최소화 알고리즘에 의한 세선화 영상의 결손 부분을 보완한 후 임상진단에 필요한 정보를 제공하는 세포의 면적과 분포를 계산한다.