• Food Science and Industry
• /
• v.42 no.1
• /
• pp.39-48
• /
• 2009

• Korean Journal of Organic Agriculture
• /
• v.28 no.2
• /
• pp.139-154
• /
• 2020

The purpose of this study is to improve some problems of the country-of-origin labeling based on the perception of consumers. For this, we surveyed 636 people. The questions of the survey are largely divided into three categories; 1) criteria and subject for imposition of fine, 2) the possibility of getting consumers confused with the products using domestic regional names as domestic products, 3) criteria for the country-of-origin transplantation of agricultural products and forestry products. According to the results, more than 30.0% of consumers preferred that it is adequate for imposing fine as much as its total sales, regardless of the type of business. In addition, in the case of products using domestic regional names, consumers can be confused about the products with domestic ones, even though there is a standard for confusing country-of-origin labeling. Standard for changing the country-of-origin of agricultural, forestry products and livestock, fisheries products are not balanced. The results of this study can be used as basis data for revising the country-of-origin labeling.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.219-229
• /
• 2017

Forest road is an essential infrastructure for forest management such as the composition and management of forest resources, timber and forest byproduct production & transportation. It has recently been utilized forest recreation and forest sports as well as also forest pest control, forest fire prevention and evolution. When you build a forest road, the economic function in the forest is activated, so that it can result in the ripple effect of induced employment, value-added creation and production inducement. The purpose of this study is to analyze the impact caused by forest road construction occurring as the overall economy. For analysis it was applied to inter industry analysis method that is a method for analyzing the quantitative cross-correlation. The data were used in the Input-Output Tables In 2014, the Bank of Korea. When you build a forest road, economic effect due to the construction of the forest road is generated and economic effects are also generated due to the increase in the production of forest products after the construction of the forest road. Therefore, we will analyze the economic impact of the two effects. The estimated economic value of forest products, which is the economic effect of forest product cultivation, was calculated through some assumptions and the economic ripple effect was analyzed. The forest road construction sector is defined as land clearing and reclamation, and irrigation project construction and the forestry forest products sector is defined as the sum of raw timber, edible forest products and misc. forest products. In total, 32 sectors were classified, and except for the two sectors defined as forest road construction and forestry forest products, the remaining sectors were integrated according to the classification system of 30 integrated classifications of the Bank of Korea. As a result, the production inducement coefficient for forest construction was analyzed to be 2.767 and the production inducement coefficient for forestry forest products was analyzed to be 1.565. This means that 2,767 times the production of forest road construction investment is induced in the whole industry and the production of 1.562 times the amount of forestry forest products is caused by the whole industry as the production of forestry forest products increases. The value added inducement coefficient for forest road construction was 0.977 and the value added inducement coefficient for forestry forest products was 0.985. Forest road are essential infrastructure for forestry development and should be continuously invested because they are essential elements of timber production and forest byproduct production with functions such as forest management, forest recreation, forest sports, and town connection.

• Mycobiology
• /
• v.51 no.1
• /
• pp.36-48
• /
• 2023

Xanthoria elegans is a lichen symbiosis, that inhabits extreme environments and can absorb UV-B. We reported the de novo sequencing and assembly of X. elegans genome. The whole genome was approximately 44.63 Mb, with a GC content of 40.69%. Genome assembly generated 207 scaffolds with an N50 length of 563,100 bp, N90 length of 122,672 bp. The genome comprised 9,581 genes, some encoded enzymes involved in the secondary metabolism such as terpene, polyketides. To further understand the UV-B absorbing and adaptability to extreme environments mechanisms of X. elegans, we searched the secondary metabolites genes and gene-cluster from the genome using genome-mining and bioinformatics analysis. The results revealed that 7 NR-PKSs, 12 HR-PKSs and 2 hybrid PKS-PKSs from X. elegans were isolated, they belong to Type I PKS (T1PKS) according to the domain architecture; phylogenetic analysis and BGCs comparison linked the putative products to two NR-PKSs and three HR-PKSs, the putative products of two NR-PKSs were emodin xanthrone (most likely parietin) and mycophelonic acid, the putative products of three HR-PKSs were soppilines, (+)-asperlin and macrolactone brefeldin A, respectively. 5 PKSs from X. elegans build a correlation between the SMs carbon skeleton and PKS genes based on the domain architecture, phylogenetic and BGC comparison. Although the function of 16 PKSs remains unclear, the findings emphasize that the genes from X. elegans represent an unexploited source of novel polyketide and utilization of lichen gene resources.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.4
• /
• pp.347-358
• /
• 2011

Fomitopsis palustris, a brown-rot basidiomycete, causes the most destructive type of decay in wooden structures. In spite of its great economic importance, very little information is available at the molecular level regarding its complex decay process. To address this, we generated over 3,000 expressed sequence tags (ESTs) from a cDNA library constructed from F. palustris. Clustering of 3,095 high-quality ESTs resulted in a set of 1,403 putative unigenes comprising 485 contigs and 918 singlets. Homology searches based on BlastX analysis revealed that 78% of the F. palustris unigenes had a significant match to proteins deposited in the nonredundant databases. A subset of F. palustris unigenes showed similarity to the carbohydrateactive enzymes (CAZymes), including a range of glycosyl hydrolase (GH) family proteins. Some of these CAZyme-encoded genes were previously undescribed for F. palustris but predicted to have potential roles in biodegradation of wood. Among them, we identified and characterized a gene (FpCel45A) encoding the GH family 45 endoglucanase. Moreover, we also provided functional classification of 473 (34%) of F. palustris unigenes using the Gene Ontology hierarchy. The annotated EST data sets and related analysis may be useful in providing an initial insight into the genetic background of F. palustris.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.671-681
• /
• 2017

Oil palm trunk (OPT) is a potential source of biomass for the production of biopellet. In the present research, biopellet were prepared from the meristem part of 25 years old OPT with various percentages of its bark (0, 10, and 30%). The highest biopellet durability was found for biopellet produced at $130^{\circ}C$ of pelletizing temperature with 30% bark content. Scanning electron microscopy (SEM) of biopellet showed the weak of particle bonding due to the low pelletizing pressure. The moisture content, unit density, ash content, and caloric value of OPT-based pellets were 3.55-5.35%, $525.56-855.23kg/m^3$, 2.76-3.44%, and 17.89-19.14 MJ/kg, respectively. The combustion profiles obtained by thermogravimetric analysis (TGA) seemed to be unaffected by the bark content on. Differential thermal analysis of TGA curve indicated different pyrolysis characteristic of hemicellulose, cellulose, and lignin.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.641-650
• /
• 2020

In this study, the chemical components and termiticidal activities of bamboo vinegar against subterranean termite were evaluated. Bamboo vinegar used in this study were produced from Mayan (Gigantochloa robusta Kurz.), Balcoa (Bambusa balcooa Roxb.), and Taiwan (Dendrocalamus latiflorus Munro). It was analyzed by gravimetric methods. Rubberwood (Hevea brasiliensis) was soaked for 24 h and tested against Coptotermes curvignathus Holmgren according to the Indonesian National Standard (SNI 7207-2014). The bamboo vinegar demonstrated antitermite activities against subterranean termite. Vinegar of 400℃ recorded higher total phenol and acid than that of 300℃. Results from this study suggest that the phenolic and acidic component of the bamboo vinegar contributed to 100% mortality rate of the termite, some wood weight loss, and a decrease in the termite feeding rate. These results strongly recommend that bamboo vinegar from D. latiflorus Munro is a potential environmentally friendly preservative.

• Plant Biotechnology Reports
• /
• v.3 no.1
• /
• pp.57-65
• /
• 2009

Cultured Cupressus lusitanica cells induced by various stresses are thought to produce different complexes of defense chemicals to optimize defense. To compare the induced products of two stimulations, we investigated the emission of monoterpenes, biosynthesis of ${\beta}-thujaplicin$, and accumulation of lignin in mechanically stressed and fungal elicited cultured C. lusitanica cells. Both mechanical stress and fungal elicitor caused emission of qualitatively similar monoterpene blends indicating de novo biosynthesis of these compounds after stimulation, while mechanical stress alone is sufficient to induce fungal elicitor-related monoterpene emission. Sabinene and limonene were the dominant compounds over the time course in both volatile blends. Although the emitted volatile blends were qualitatively similar, the time course and the relative ratios of the constituents of the volatile blends differed with the type of stimulation. While fungal elicited cells produced significant amounts of ${\beta}-thujaplicin$ over the 5-day time course, no ${\beta}-thujaplicin$ was observed in the mechanically stressed cells. The production of ${\beta}-thujaplicin$ was the main dissimilarity of the induced products of these two treatments, suggesting that synthesis of ${\beta}-thujaplicin$ is not a general response to all types of stresses, but is a specific response and serves as a strong toxic compound against already invaded fungus. Significantly higher amounts of lignin accumulations were observed in the fungal elicited and mechanically stressed cells on the 5th day after induction. Based on these results, we suggest the composition of induced products was dependent on the method of stimulation.

• Korean Journal of Agricultural Science
• /
• v.38 no.3
• /
• pp.421-428
• /
• 2011

Of the countries where Korea has advanced for overseas afforestation investments, Indonesia might be the most important country. As the end of 2010, nine Korean companies have been implementing afforestation projects in Indonesia, covering a total area of one hundred and fifty thousand hectares roughly. Following the Memorandum Of Understanding (MOU) on afforestation investment covering five hundred thousand hectares (A/R CDM / industrial afforestation) signed between Korea and Indonesia, the two countries concluded in 2009 an additional MOU covering two hundred thousand hectares for biomass afforestation, thus securing a total afforestation area of seven hundred thousand hectares. Further it was guaranteed that afforestation license would have validity for maximum 95 years, which laid the foundation for long-term stable investments for afforestation projects. Forest law of Indonesia consists of Presidential decree and Governmental decree as superior regulations and Minister's decree as subordinate regulations, being made up of total 17 chapters. Forestry Minister's decree was amended at end of last year, as regards license for exploitation of timber and forestry products in afforestation area. In the past, such license to develop and use timber and forestry products had been granted under Forestry Minister's decree No. P 11 / Menhut-II / 2008. After the amendment in 2010, however, the ground was shifted to Forestry Minister's decree No. P 50 / Menhut-II / 2010, trimming the procedure to obtain afforestation license into a little simplified one.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1161-1161
• /
• 2001

Rapid cost-effective methods of measuring wood quality are extremely important to tree improvement programs where it is necessary to test large numbers of trees. Non-destructive sampling of a forest can be achieved by using increment cores generally removed at breast height. At CSIRO Forestry and Forest Products methods for the rapid, non-destructive measurement of wood properties and wood chemistry based on increment core samples have been developed. In this paper the application of near infrared (NIR) spectroscopy to the prediction of a range solid wood properties, including density, longitudinal modulus of elasticity (E$\sub$L/) and microfibril angle (MFA), is described. Experiments conducted on individual species (Eucalyptus delegatensis and Pinus radiata), the two species combined and a number of mixed species from several genera are reported. NIR spectra were obtained from the radial/longitudinal face of each sample and used to develop calibrations for the measured physical properties. When the individual species were used the relationships between laboratory determined data and NIR fitted data were good in all cases. Coefficients of determination (R$^2$) ranging from 0.77 for MFA to 0.93 for stick density were obtained for E. delegatensis and R$^2$ ranging from 0.68 for MFA to 0.94 for strip density were obtained for P. radiata. The calibration statistics for the combined E. delegatensis and P. radiata samples were similar to those found for the individual species. As these results indicated that it might be possible to produce general calibrations based on samples from a number of species of a single genus or samples from a number of different genera, a wide range of species was subsequently tested. Good relationships were obtained for both density and E$\sub$L/. These calibrations had R$^2$ that were slightly lower than those determined using individual species and standard errors that were higher. The mixed species calibrations, when applied to the E. delegatensis and P. radiata sample sets, provided good estimates of density (stick and strip) and E$\sub$L/. The results demonstrated that a mixed species calibration, that encompasses wide variation in terms of, wood anatomy, chemistry and physical properties, could be used to rank trees. Experiments reported in this paper demonstrate that solid wood properties can be estimated by NIR spectroscopy. The method offers a rapid and non-destructive alternative to traditional methods of analysis and is applicable to large-scale non-destructive forest resource assessment, and to tree breeding and silvicultural programs.