• Applied Chemistry for Engineering
• /
• 제24권4호
• /
• pp.428-432
• /
• 2013

From the forest areas in Chungbuk, large amounts of wood wastes by pruning are generated, however most of them considered as by-products are not treated properly with no disposal options. In this work, among diverse wood wastes such as Quercus variabillis, Juniperus chinensis, Larix kaemoferi, and Pinus densiflora, Juniperus chinensis was found to be more effective biosorbent for the removal of lead ions than other wood wastes. Also, the enhancement of lead removal efficiency from the aqueous phase was investigated using Juniperus chinensis waste. It was observed that the optimal initial pH to increase the removal efficiency of 20 mg/L lead ions was 4.0 and the optimal dosage concentration with regard to the biosorbent for the enhanced removal of 50 mg/L lead ions was 0.6 g/100 mL. In addition, chemical treatment of Juniperus chinensis waste with sulfuric acid was required to improve the adsorption capacity for high lead concentrations (over 100 mg/L). When Juniperus chinensis waste was chemically treated with 6 M sulfuric acid, the adsorption quantities of lead ions were 180, 340, and 425 mg/g with regard to 200, 400, and 500 mg/L lead ions concentrations, respectively. These results indicate that the practical biosorbent technology developed in this study is a highly efficient method to treat the lead ion from an aqueous solution.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제4권2호
• /
• pp.3-11
• /
• 1998

Coating was carried out on liner components of B flute, single-wall corrugated board(SK180/S120/K200) to examine the effect of liner component coatings by oxidized starch on the properties of corrugated board. Both bursting strength and edgewise compression strength(ECS) of corrugated board were improved by coating of its liner components with oxidized starch. Bursting strength of corrugated board rapidly increased with an initial increase of coating weight, but as the coating weight further increased, there was no increase in bursting strength. The results showed 30.3% improvement for $2.32g/m^2$ coating on outside liner component, 36.8% improvement for $4.84g/m^2$ coating on inside liner component and 39.9% improvement for $7.16g/m^2$ coating on both liner components in bursting strength of corrugated board. Regardless of treated liner components, ECS of corrugated board was improved by coating of oxidized starch, and especially greater improvement was accomplished when corrugated board was coated on inside liner component or both liner components at low level of coating weight - 11.3% improvement for $1.58g/m^2$ coating on Inside liner component and 11.9% improvement for $2.99g/m^2$ coating on both liner components.

• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.95-103
• /
• 2011

We have investigated pretreatment of waste wood using milling refinery combined with poping method, which can save energy for pretreatment and enzyme loading for enzymatic hydrolysis. The chemical analysis of holocellulose of non and popping treated waste wood showed 65.9% and 58.8%, and the lignin, organic extracts and ash were increased by 3%, 4% and 0.7% after pretreatment, respectively. The reducing sugar yields of pretreated waste wood were increased four times more than non-pretreated one and the synergistic effect of cellulase and xylanase were evaluated compare with individual enzyme treatment. Especially, enzyme cocktail (cellulase 50 U and xylanase 50 U) treatment was very efficient in 1% substrate (50 mg). Also, glucose and xylose conversion rate of pretreated waste wood by GC analysis were 45.9% and 38.7%, respectively.

• Journal of Mushroom
• /
• 제3권2호
• /
• pp.52-59
• /
• 2005

The Aphyllophorales is a large order containing about 2,000 known species. Many of these are the bracket and coral fungi. The vast majority of these fungi are saprophytic on the plant debris. Many species are significant in decomposing plant remains, as they are able to digest cellulose or lignin that occurs in plant cell walls. Many of these fungi have been involved in everyday human affairs. A few were used medicinally by the Greeks and Romans as a remedy for many complaints, including colic, fractured limbs and bruises. Other bracket fungi have been used as curry combs for horses, as snuff, as razor strops and as a source of dye for clothing. The texture of the basidiocarp may be similar to that of cork, wood, leather, paper, or cartilage. Unlike the basidiocarps of the Order Agaricales, the basidiocarps of the Aphyllophorales are not fleshly and moist. Division of the members of the Aphyllophorales into genera was originally made on the basis of gross morphology of the basidiocarp and hymenium and Donk(1964) recognizes 22 families in this order. The species and genus whose typical in Aphylloporales were listed in Table. with related information. The ITS region sequence of some genus were found by BLAST search. Sequences retrieved from GenBank were visually aligned by the program CLUSTAL G. As a result, the medicinal mushroom was separated in four groups. In this multiple alignment, the sequence analysis among Fomes group, Inonotus group and Phellinus group showed high genetic similarity except Hericium group and Sparassis group.

• Journal of Conservation Science
• /
• 제24권
• /
• pp.13-22
• /
• 2008

The identification of species, hygroscopic property, and ability of ethylene gas absorption of 23 ancient charcoals excavated from wooden coffin burials and roof-tile kilns of Chudong-ri cultural site were investigated. All of the 12 charcoals excavated from wooden coffin burials were broad-leaved trees. Among the total 12 samples, 9 samples were Lepidobalanus and others were Celtis spp.. On the other hand, other 11 charcoals from roof-tile kilns were needle-leaved tree, Pinus spp.(hard pine). The broad-leaved tree charcoals from wooden coffin burials showed a higher moisture absorption capacity than needle-leaved tree charcoals from roof-tile kilns. The ethylene gas absorption was greater in the Lepidobalanus charcoal than that of Celtis spp. and Pinus spp. (hard pine) charcoal. The broad-leaved tree charcoal having high absorption ability of substances was due to a large microporous and specific surface area. Therefore, it was estimated that broad-leaved tree charcoals were filled in order to make favorable condition in tomb. The wood quality of pine is soft and easy to burn because of low specific gravity, as well as high calorific value by resin in wood. We could assume that the pine wood was used as fuel for roof-tile kilns because of easy control of heating and thermal power.

• Current Research on Agriculture and Life Sciences
• /
• 제31권4호
• /
• pp.286-294
• /
• 2013

Increasing concern for the health, well-being, and income of the people has expectedly brought continuous increase in the industrial value of medicinal plants in recent years as these are also used in foods and cosmetics. However, Korea's increased import of these products from China due to the FTA contract causes negative effects on its industrial value. In this regard, various measures for medicinal crop seed development and production, organization and expansion of circulation and forest land use deregulation are needed to promote the agricultural food industry including medicinal plants. As a measure, first, a database of medicinal plants should be built that can help to promote the national medicinal industry and the seed management system. Second, agricultural productivity should be enhanced via the development and supply of varieties of high quality medicinal plants. Third, there should be a good practice of the system maintenance for the production and supply of medicinal crop seeds. Fourth, production and distribution system of medicinal plants should be established by standardization of high quality seeds. Nowadays, the consumption pattern of medicinal crops is changing from direct ingestion to cosmetics, drugs, and food and this is expected to increase continuously. Consequently, the increased production of medicinal crops will support the development policy and the institutional improvement in response to this trend of the positive change of industrialization.

• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.1-8
• /
• 2000

To develop the technology of producing structural board from low grade materials, an attempt was made to produce strand/particle composites from split wood strand(S) and particle(P) of (Cryptomeria japonica D. Don), which changed the layer construction and the ratio of S/P. The influence of layer construction on board properties was determined, focusing on the number and alignment of the S layers. The effect of weight ratio of S/P (3:7, 1:1, 7:3) on mechanical properties was also discussed on seven layered panel. Mechanical properties were determined from static bending tests to give parallel and perpendicular modulus of rupture (MOR) and modulus of elasticity (MOE), and the internal bond (IB) strength. In general, the surface strand layers contributed to the MOR and MOE. The parallel MOR and MOE values were the largest for the single layered S panel (only Slayers: S1), but the perpendicular MOR and MOE was the smallest. Perpendicular MOR and MOE were the largest for seven layered composite that had two cross oriented strand layers (SPSPSPS: SP7). Specimens retained more than half of their MOE and MOR after two hours in boiling water and one hour soaking. IB was the largest for the panel having only P layers, however, differences in IB strength were not identified among the other multi-layered composite panels thus the effect of layer construction on IB strength was small. Thickness swelling (TS) and surface roughness were smaller for the composite having P layers on the surface than for those having S layers. The addition of strands did not enhance the mechanical properties (MOR, MOE, IB). TS values for the panels, with which the S/P ratio was over than 1:1, was the similar to the value for the single layered S panels.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제40권5호
• /
• pp.60-69
• /
• 2008

The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.

• Korean Journal of Medicinal Crop Science
• /
• 제11권2호
• /
• pp.143-147
• /
• 2003

This study was carried out to investigate the effect of Sorbus commixta Hedl. fruit extracts on the lipid metabolism in rats. Experimental groups were divided into 3 groups; Sprague-dawley rats were fed either diets containing 1% of water extracts(WE group), 1% methanol extracts(MeOH group) and diets without extracts(Control group) during 4 weeks. Food intake, weight gain and liver weight were not shown in meaning full difference among the groups. The concentration of serum triglyceride and total cholesterol were significantly decreased in WE and MeOH group compared to control group. Serum HDL-cholesterol, phospholipids and glucose contents were slightly lower in WE and MeOH group than control group. The levels of liver triglyceride was significantly decreased in MeOH group compared to control group. The levels of total cholesterol and phospholipids in liver were significantly lower in WE and MeOH group than control group.

• Molecules and Cells
• /
• 제26권3호
• /
• pp.314-318
• /
• 2008

Korean long-tailed goral (Nemorhaedus caudatus) is one of the most endangered species in South Korea. However, detailed species distribution and sex ratio data on the elusive goral are still lacking due to difficulty of identification of the species and sex in the field. The primary aim of this study was to develop an economical PCR-RFLP method to identify species using invasive or non-invasive samples from five Korean ungulates: goral (N. caudatus), roe deer (Capreolus pygargus), feral goat (Capra hircus), water deer (Hydropotes inermis) and musk deer (Moschus moschiferus). The secondary aim was to find more efficient molecular sexing techniques that may be applied to invasive or non-invasive samples of ungulate species. We successfully utilized PCR-RFLP of partial mitochondrial cytochrome b gene (376 bp) for species identification, and sex-specific amplification of ZFX/Y and AMELX/Y genes for sexing. Three species (goral, goat and water deer) showed distinctive band patterns by using three restriction enzymes (Xbal, Stul or Sspl). Three different sexing primer sets (LGL331/335 for ZFX/Y gene; SE47/48 or SE47/53 for AMELX/Y gene) produced sex-specific band patterns in goral, goat and roe deer. Our results suggest that the molecular analyses of non-invasive samples might provide us with potential tools for the further genetic and ecological study of Korean goral and related species.