• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.1
• /
• pp.55-68
• /
• 2020

In order to investigate the hydraulic characteristics of a boundary layer streaming over the beach cusps appeared in swells prevailing mild seas, we numerically simulated the shoaling process of Edge waves over the beach cusp. Synchronous Edge waves known to sustain the beach cusps could successfully be duplicated by generating two obliquely colliding Edge waves in front of beach cusps. The amplitude A_B and length L_B of Beach Cusp were elected to be 1.25 m and 18 m, respectively based on the measured data along the Mang-Bang beach. Numerical results show that boundary layer streaming was formed at every phase of shoaling process without exception, and the maximum boundary layer streaming was observed to occur at the crest of sand bar. In RUN 1 where the shortest waves were deployed, the maximum boundary layer streaming was observed to be around 0.32 m/s, which far exceeds the amplitude of free stream by two times. It is also noted that the maximum boundary layer streaming mentioned above greatly differs from the analytical solution by Longuet-Higgins (1957) based on wave Reynolds stress. In doing so, we also identify the recovery procedure of natural beaches in swells prevailing mild seas, which can be summarized such as: as the infra-gravity waves formed in swells by the resonance wave-wave interaction arrives near the breaking line, the sediments ascending near the free surface by the Phase II waves orbital motion were carried toward the pinnacle of foreshore by the shoreward flow commenced at the steep front of breaking waves, and were deposited near the pinnacle of foreshore due to the infiltration.

• Journal of the Korean earth science society
• /
• v.39 no.1
• /
• pp.23-45
• /
• 2018

Moderately diverse, but very abundant trace fossils are found from the Late Pleistocene deposits of Jeju Island, Korea. Vertical I-, Y- and U-shaped domichnia of annelids or decapods are, over 2500, extremely abundant, 3D network domichnia of callianassids are, over 200, very abundant, and small sinuous trails of nematode repichnia are, over 50, abundant in number. Horizontal trails attributable to polychaete or worm-like animals are, less than 50, common, but horizontal spreiten burrows, fish traces and crab trackways are, less than 10, rare in occurrence. Of these trace fossils, Taenidium barretti, Undichna britannica and Undichna unisulca represent the first record from the Pleistocene in Asia. Psilonichnus upsilon is the second record in Asia. Crab trackways probably produced by underwater punting gait of sideway walking crabs may represent the first record in the world. In addition, diverse and very abundant footprints of more than 500 hominids, more than 200 birds and more than 1000 mammals are closely associated with these invertebrate trace fossils. Trace fossil assemblage integrated with sedimentary facies is interpreted to have been formed in the marginal marine foreshore to backshore environment corresponding to the Psilonichnus and Skolithos ichnofacies.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.5
• /
• pp.366-371
• /
• 2012

High swell has been known for the one of the main causes of beach erosion in the east coast of Korea. In this study, coastal topography changes due to high swells are simulated to find its effect on the backshore by using movable bed experiments and numerical experiments. Sea bottom topographical changes due to various incident waves were investigated using CSHORE model in the numerical experiments. Furthermore, the mechanism and the phenomena of beach erosion due to waves and high swells on the foreshore and backshore were analyzed and compared with movable bed hydraulic experiments.

• Smart Structures and Systems
• /
• v.7 no.4
• /
• pp.289-302
• /
• 2011

In marine clay deposits, naturally formed or artificially reclaimed, the evaluation and monitoring of the consolidation process has been a critical issue in civil engineering practices due to the time frame required for completing the consolidation process, which range from several days to several years. While complementing the conventional iconographic method suggested by Casagrande and recently developed in-situ techniques that measure the shear wave, this study suggests an alternative experimental procedure that can be used to evaluate the consolidation state of marine clay deposits using the shear wave velocity. A laboratory consolidation testing apparatus was implemented with bimorph-type piezoelectric bender elements to determine the effective stress-shear wave velocity (${\sigma}^{\prime}-V_s$) relationship with the marine clays of interest. The in-situ consolidation state was then evaluated by comparing the in-situ shear wave velocity data with the effective stress-shear wave velocity relationships obtained from laboratory experiments. The suggested methodology was applied and verified at three different sites in South Korea, i.e., a foreshore site in Incheon, a submarine deposit in Busan, and an estuary delta deposit in Busan. It is found that the shear wave-based experimental procedure presented in this paper can be effectively and reliably used to evaluate the consolidation state of marine clay deposits.

• Korean Journal of Ecology and Environment
• /
• v.54 no.3
• /
• pp.257-264
• /
• 2021

In this study, we analyzed the food components in the release product that sampled Sinonovacula constricta from the foreshore littoral at Byeongnyang-myeon, Suncheon Bay. We used microscopy and next-generation sequencing (NGS) to evaluate the applicability of morphological and molecular methods to analyze release products. The higher species diversity observed in the NGS method is due to the different levels of species identification, as microscopy displays morphological and anatomical levels of plankton species identification in S. constrita. Moreover, NGS can identify the level of species in the organic matter by using the 18s_V9 primer.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.3 no.1
• /
• pp.75-80
• /
• 1999

An investigation of noise and vibration caused by the reclamation of the foreshore around J village resulted in noise measurements of 56-84 dB at the first point, 62-81 dB at the second point, and 68-78 dB at the third point. These measurements were higher than the standard level of environmental noise that is 55 dB at noon and 45 dB at night. The vibration measurements were 61-83 dB at the first point, 63-88 dB at the second point, and 58-77 dB at the third point. These measurements were also higher than the standard level of environmental vibration that is 60 dB at noon and 54 dB at night. The measurements of scattering dust were 80 $\mu\textrm{g}$/$\textrm{m}^3$ at the first point, 120 $\mu\textrm{g}$/$\textrm{m}^3$ at the second point, and 169 $\mu\textrm{g}$/$\textrm{m}^3$ at the third point. These measurements were lower than the standard level of environmental dust that is 300 $\mu\textrm{g}$/$\textrm{m}^3$/day. Although the maximum vibration level was higher than the standard level of environmental vibration, it had no influence on the construction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.1-11
• /
• 1988

Some promising design criteria for the construction of artificial beaches are presented. Based on the result of visitor's enquete and field observations, the degree of satisfaction for some parameters such as wave height, water and air temperature and quality of sediments are obtained. Correlations between these parameters and the degree of satisfaction are also derived and discussed. From the study, the desirable design conditions for artificial beaches with the degree of satisfaction over 70% are proposed as; the minimum comfortable utilization area per capita is found to be approximately $10m^2$, maximum mean wave height 0.7m, the lowest water temperature $22^{\circ}C$, average diameter of sands 0.5mm approximately with identical grain size and roundness, and the foreshore slope less than 1 : 20.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.141-153
• /
• 2018

Purpose : The subject site selected in this study was a place that was prepared through the reclamation of foreshore completed in 1973. Since then, the site has been occupied by the industry of ship repair for over 30 years. Method : The results of a precise soil examination conducted in 2013 showed that the site was seriously contaminated with TPH over an area of $10,000m^2$ and GL(-)3.0m in depth, with an expanding coverage of contamination. Results : The soil contamination by refined petroleum products often results in adverse effects to human health and ecological systems, thus the contamination should be purified as soon as possible. Conclusion : Hydrogeological investigation can be employed to assess the groundwater movement and propagation of contamination to determine the potential agents or contaminants in the soil contaminated with high concentration TPH.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.108-113
• /
• 2006

For the past scores of years, our country has driven its land development toward economic growth as its top priority. ut, as a result that almost all developments been promoted excepting environmental values, in fact, they've incurred some bad environmental effects desirable. Especially, as representative examples, we can raise some issues such as damages of the foreshore or coast wet lands by seas reclamation, and coast corrosion by building up of rivers or coast constructions. Recently, many people started to have great interests in businesses of environment preservation or recycling to minimize effects of these environmental matters. However, before beginning public businesses of non-commercial goods relevant to the seas environments, there seemed to be some limitations that can not accomplish under consideration of environmental sides at the same time while performing economic validities and efficiencies with environmental economic analysis, which is already effective in countries advanced in environment, it's a very meaningful course in that citizens' opinions are being influenced in seas environmental policies for their efficient execution. In this research, after modeling coast corrosion preventives with Jeong-am coast of Gangwon Province, and using Contingent Valuation Method being widely used of value measuring methods on Non-commercial goods, we've appreciated environmental economy's validity of construction works and the scale of environmental economic value of beach restoration work.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.25-31
• /
• 2008

As we choose ground control points for aerial triangulation, we have a lot of problems in a mountain, a costal area, a desert, the foreshore etc because they don't have clear topography for control points and it spends a lot of cost and occurs problems of accuracy. In this study, we compare and analyze between ground control points from LiDAR intensity, digital map with ground control points from the field survey as doing AT each. As the result, the average error was ${\pm}1.02m$ from using LiDAR intensity, ${\pm}1.13m$ from using digital map. this result can present the control points from LiDAR intensity is 0.11m better than from digital map.