• Journal of the Korean Institute of Navigation
• /
• v.17 no.1
• /
• pp.1-15
• /
• 1993

According to careful study on the COLREGS, 1972, we can easily find out a main point that is to eliminate risk of collision at sea through exercising due regard to all danger of navigation and collision and to any special circumstances including the limitation of the vessels involved, or precaution which may be required by the ordinary practice of seamen. This paper, therefore, aims to clarify legal concept concerning the risk of collision so as to easier assimilate and understand by all mariner before being presented with a situation of danger in realty. After such a forethought and understanding the mariner will be in a position timely to implement the due regard or precaution to avoid collision by himself. For the purpose of good guidance, comprehensive legal practices of collision avoidance are adequately summarized by foreign and domestic cases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.796-801
• /
• 2011

The objective of this work presented here was focused on analysis of development trend for the integrated power system of naval vessels to perform the high-power and energy mission load platform. These mission loads are affected by the high level of military technologies, digitalization of the ocean battlefield, high power sensor system for maximization of the ship survivability. All electric power including propulsion power for ship should be controlled by integrated single system in order to carry various high power density weapon system such as Electromagnetic Aircraft Launch System, Electromagnetic Rail Gun[feasible precision striking at long distance 200NM(370km) or over]. As the analyzing the present state of things, mechanical propulsion system is shifted into hybrid or fully electric propulsion systems to realize integrated power system at the developed countries. Such challenges include reduced dependency on foreign-supplied fossil fuel, increasing demand for installed ship power, controlling life-cycle costs.

• ALGAE
• /
• v.26 no.2
• /
• pp.181-192
• /
• 2011

Ballasting and deballasting of shipping vessels in foreign ports have been reported worldwide as a vector of introduction of non-native aquatic plants and animals. Recently, attention has turned to ballast water as a factor in the global increase of harmful algal blooms (HABs). Many species of microalgae, including harmful dinoflagellate species, can remain viable for months in dormant benthic stages (cysts) in ballast sediments. Over a period of four years, we surveyed ballast water and sediment of ships docked in two ports of Tampa Bay, Florida, USA. Sampling conditions encountered while sampling ballast water and sediments were vastly different between vessels. Since no single sample collection protocol could be applied, existing methods for sampling ballast were modified and new methods created to reduce time and labor necessary for the collection of high-quality, qualitative samples. Five methods were refined or developed, including one that allowed for a directed intake of water and sediments. From 63 samples, 1,633 dinoflagellate cysts and cyst-like cells were recovered. A native, cyst-forming, harmful dinoflagellate, Alexandrium balechii (Steidinger) F. J. R. Taylor, was collected, isolated, and cultured from the same vessel six months apart, indicating that ships exchanging ballast water in Tampa Bay have the potential to transport HAB species to other ports with similar ecologies, exposing them to non-native, potentially toxic blooms.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.47-52
• /
• 2011

On the high seas, under international law, a ship is subject to the jurisdiction of the state whose flag she flies. Vessels of any flag are free to navigate the high seas without interference from other states. Thus, there are certain limits of coastal state's exercising law enforcement jurisdiction over a foreign flag vessel on the high seas. However, there are exceptions to exclusive flag state jurisdiction. One of them is the theory of constructive presence. The other is theory of partial execution. Korea Coast Guard's law enforcement authority should be exercised more actively based on those theories supported by the international cases.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.4
• /
• pp.397-418
• /
• 1994

Microvascular surgery has been widely used in the clinical field of replantation and reconstructive surgery. Since the last 20 years, microsurgical techniques and instruments have been rapidly developed and the success rate is remarkably increased. But thrombotic occlusion of vessels remains the major reason for clinical failure. The change of vessel wall is the most important factor in thrombus formation. If we can reduce the traumatic changes in the vessel walls during surgery, the success rate can be markedly increased. For this study, femoral arteries and veins of 36 Sprague-Dawley rats with average weights of 300gm were used. The author observed the histological changes and healing process in the anastomostic site after 1 hour, 24 hours, 1, 2, 3 and 4 weeks under light microscopy and scanning electron microscopy. The results were as follows : 1. The patency rate was 100% in femoral arteries and 85% in femoral vein. 2. At the early stages after microvascular anastomosis, the loss of endothelial cell in the vessel walls was observed in the wide area including anastomotic site. In scanning electron microscopic finding the anastomotic site was covered with much fibrin, many red blood cells and some platelets. 3. At 1st week, new endothelial cells were formed toward anastomotic site and at 3rd week, the anastomotic site was completely covered by new endothelial cells. At 4th week, the complete endothelialization over the threads was observed. 4. The media extended from the anastomotic site toward the end of the specimen. At later stages, the extent of media necrosis was markedly decreased. But the media necrosis of anastomotic site was not regenerated till 4th week. 5. Intimal hyperplasia appeared at 1st week and increased till 4th week. The layer consisted of endothelialization the most luminal layers and smooth muscle in the deeper layers. But in veins, the response was less pronounced than in arteries. 6. Foreign body granuloma remained during 4 weeks and aneurysm was observed at 3rd week in artery. In aneurismal wall, media necrosis, loss of elastic lamina and intimal hyperplasia were seen.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.20-27
• /
• 2010

In order to prevent the corrosion of component contacted primary water designed alloy 600 material in the nuclear power plant. But the primary water stress corrosion cracking(PWSCC) of alloy 600 and weld area occurs continuously due to the residual stress. The leakage accident resulted from PWSCC in the drain nozzle of the steam generator of domestic power plants. Heater sleeves of the pressurizer are welded with alloy 600 weld material and therefore exposed to the primary water environment. PWSCC occurred in heater sleeve material and weld area of many foreign power plants. The current issue of domestic nuclear power plants are consequently concentrated to PWSCC of similar material. In order to improve the detection and the sizing of the PWSCC in the welding sleeve of the pressurizer, the automatic UT system and multi-directions probe sets have been developed. The experimental studies have been performed using the mock-up block containing artificial reflectors(ID connected EDM notch) and semi-artificial cracks made from thermal fatigue. The automatic UT System is applied in the detection and the length sizing of the ID/OD on the tube and the J-groove weld area of the artificial reflectors and results of the detection and the sizing are compared respectively. Also, the developed automatic UT system is successfully accomplished to inspect the heater sleeve and the J-groove weld area on the pressurizer for the detection of PWSCC.

• Journal of Navigation and Port Research
• /
• v.33 no.7
• /
• pp.491-500
• /
• 2009

In order to attract more transshipment cargoes, Busan Port Authority (BPA) has, since 2003, adopted the volume incentive policy by which more than US$ 10 million annually have been paid back to shipping lines that were called at the port. However, having been a transshipment port for the Northeast region of China, the port of Busan has come under threat from bold Chinese port development projects, notably Shanghai, as northern Chinese regionnl ports place more emphasis on building facilities capable of handling growing trade volumes. Undoubtedly this would lead to a decline in transshipment container traffic moved via Busan. The purpose of this paper is to identify some core factors that have been affecting the increase of transshipment cargoes of Busan and further to recommend BPA an improved incentive scheme with which more T/S cargoes can be attracted into the port of Busan To clarity the reason why T/S cargoes have increased in the port of Busan, several steps are made as follows: The first step is to make a quantitative model for explaining the development of T/S cargoes during the last decade. The second step is to define the dependent and the independent variables for multiple regressions after testing variable significance. For this, data collection and the accuracy of validation have been done by the direct interview with the experienced staffs in shipping companies of both domestic and foreign country. After validating the model with collected data, the final step is to find variables which are explaining the model mostly. In conclusion, 2 variables were clearly identified as core factors that explain well the development of T/S cargoes in the port of Busan: 'Mohring effect' and total cost. It is strongly recommended, by an empirical study, that an incentive scheme be changed to a way which more feeder vessels rather than mother vessels can reduce their direct costs to call in the port of Busan.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.398-404
• /
• 2014

The criteria of operating anchorage and the unit of anchorage capacity have not been unified and the different terms have been used in same matters in each regulations related to the anchorages provided in major domestic ports. The competent authorities and vessels which are going to use anchorages are confused due to those situations. This paper suggests the schemes to unify criteria of operating anchorage, the unit of anchorage capacity and terms used in same matters through reviewing the anchorage operating regulations provided in major domestic ports. In addition, this paper suggests that the principles of anchorage naming, the unit of anchorage capacity and the number of vessels that can be accommodated should be established at the next revision of regulations through reviewing the status of anchorages in major foreign ports to minimize the confusion on operating anchorages.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.151-157
• /
• 2020

Harmful aquatic organisms introduced by ship movement cause marine ecosystem disturbances and are in the form of ballastwater and biofouling. Harmful marine life from ballastwater has been considerably reduced because mandatory treatment on all vessels is required to install onboard vessels. However, there remains risk of migration because biofouling is recommended to countries for management through the IMO guidelines. In particular, biofouling management has recently attracted attention for achieving IMO GHG reduction targets because it contributes to energy efficiency, as well as there are reasons for marine ecosystem protection. In recent years, increasing international consensus on the need for biofouling management is likely to lead to enforcement regulations. Thus, this study suggests the management method of hull attachment organisms in Korea, focusing on the cases of foreign countries that have regulated hull attachment organisms.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.1
• /
• pp.62-70
• /
• 2019

The APR1400 reactor may be operated for a long time under high temperature and pressure conditions, causing damage to the stud holes and causing stud bolts and holes to stick. The present practice is to manually remove the anti-sticking agent and foreign matter remaining in the APR1400 reactor stud hole and to visually check the surface condition of the thread to check the damage status of the threads. In the case of the APR1400 reactor stud holes, manually cleaning the threads increases the risk of radiation exposure and operator's fatigue. To avoid this, the autonomous mobile robot is used to automatically clean the reactor stud holes. The purpose of this study is to optimize the cleaning performance of the mobile robot by looking at the behavior of the surface roughness of the stud surface cleaned by the brush attached to the mobile robot due to changes in brush material, thickness of wire, and rotation speed. A microscopic approach to the surface roughness of the flank is needed to investigate the effects of the newly proposed brush of the autonomous mobile robot on the thread holes. According to this experiment, it is reasonable to use STS brush rather than Carbon one. Optimal operating conditions are derived and the safety of APR1400 reactor stud holes maintenance can be improved.