• 제목/요약/키워드: foreign material

검색결과 664건 처리시간 0.038초

통신회선의 잡음전압 기준 및 측정법 (Psophometeric Noise Voltage of Telecommunication Lines and Test methods)

  • 황종선;김영민;이경욱;김재준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.617-620
    • /
    • 2001
  • The protection of communication lines against harmful effects from electricity lines is very important with the rapid development of communications network. This paper is introduced the reference of noise voltage and the test methods of foreign coutnreis. Further we will also present study measurement equipment for telecommunications noise voltage and circuit noise phenomenon.

  • PDF

고성능 금속마찰재의 트라이볼로지적 특성 (Tribological Characteristics for High Perfomance Metallic Friction Materials)

  • 김석삼;김재호;안효준
    • Tribology and Lubricants
    • /
    • 제14권1호
    • /
    • pp.45-53
    • /
    • 1998
  • Friction and wear test for two kinds of Cu-based sintered metallic friction material against cast iron disk was carried out by plate-on-disk type friction and wear tester to investigate the friction and wear characteristics of brake system in severe condition. In this experimental study, the counter specimen was cast iron which is being used generally in brakes of heavy duty equipments. Test friction materials were A type which was manufactured by foreign company and B type by domestic company. Friction coefficient and wear volume were measured and compared with each other. The experiment was performed under room temperature. The worn surface of cast iron disk and friction material were observed by scanning electron microscope. The temperature of surface of disk was measured continuously by the non-contacting thermometer. It was found that A type friction material had stable friction coefficient over the wide range of sliding condition, but B type friction material had unstable friction coefficient and lower value of 0.2 under the severe sliding condition.

초미립 초경소재 개발을 통한 엔드밀 공구의 성능 평가 (Machinability Evaluation of Endmill Tool through Development of Ultra-fine Grain Grade Cemented Tungsten Carbide Material)

  • 김홍규;서정태;권동현;김정석;강명창
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.865-869
    • /
    • 1997
  • In recent years, there has been increasing demand of ultra-fine grain graded cemented tungsten carbide material with high hardness and toughness which is used as high speed cutting tool for development in semiconductor, electronics and die/mold industry, which bring into limelight high-precision, high-efficient machining of sculptured surfaces. This paper deals with the performance of variation in the ultra-fine grain graded cemented tungsten carbide material such as grain size, hardness and density varied according to the volume of added elements, Co or TaC, and he changing of mixing, sintering process. Also, the performance of developing material with uniformed grain size of 0.5${\mu}{\textrm}{m}$ is compared with other domestics' & foreign companies' with analyzing and cutting performance testing.

  • PDF

치과 치료에서 발생하는 이물질의 삼킴과 흡인의 예방과 대처 (Prevention and management of foreign body ingestion and aspiration during the dental treatment)

  • 전한솔;이진한
    • 구강회복응용과학지
    • /
    • 제34권2호
    • /
    • pp.63-71
    • /
    • 2018
  • 임플란트를 통한 보철 수복은 대중화되어 일상적인 진료가 되었다. 임플란트 보철과정에서 사용되는 기구나 작은 부속품들은 크기가 작아 치과의사의 손에서 미끄러지거나 떨어지는 경우가 많은 빈도로 발생할 수 있다. 치과 기구나 재료가 상부 위장관 내로 넘어가는 경우, 합병증이 없이 체외로 배출될 가능성이 높지만 이물질의 종류에 따라서는 심각한 합병증을 나타낼 수 있다. 이물질이 환자의 기도로 넘어가는 경우는 응급상황이며, 적절한 대처와 처치가 이루어지지 않는 경우에는 치명적인 결과를 가져올 수 있다. 본 연구에서는 치과 치료 중에 발생할 수 있는 이물질의 삼킴과 흡인을 방지하기 위하여, 이물질 삼킴과 흡인이 발생되는 과정과 예방법, 그리고 발생 시의 대처법에 대해 문헌 고찰을 시행하고자 한다.

수술적 처치가 필요했던 식도이물에 관한 임상적 고찰 (A Surgical Treatment of the Esophageal Foreign Body (10 cases report))

  • 황의두;황경환
    • Journal of Chest Surgery
    • /
    • 제30권11호
    • /
    • pp.1117-1120
    • /
    • 1997
  • 충남대학교병원에서 1980년7월부터 1995년 8월까지 경험한 식도이물 10례를 수술 치료하였다. 나이는 25 세에서 71세로, 평균 나이는 45.3세였고 남녀의 비는 6:4였다 가장 흔한 증상은 연하곤란, 발열, 이물감, 경부 동통이였다. 이물질은 생선뼈 3례였고, 거품 약포장지가 2례였고, 맥주병 마개,욕조 물마개, 깨진 사발 조각, 닭고기, 콩이 각각 1례였다. 진단은 수용성 식도 조영제와 식도 내시경을 이용하였다. 10례중 2례에서는 과거에 가성소다 섭취로 인해 식도 협착이 있었다. 1례에서는 정신과적 문제가 있었다. 식도이물은 모두 수술적 처치로 제거하였다 5례에서는 경부식도절게술을 시행하였고 1례는 우측 개흉술 을, 1례는 개복하여 위를 통해 위관을 역류성으로 통과 제거하였으며, 2례는 경부농양이 있어 절개후 배농하 였다. 3례는 수술 후 누출이 있었으나 수술치료없이 보존적 요법으로 호전되었으며,1례는 일시적인 애성이 있 었다. 1례는 외상성 기흉이 발생하여 폐쇄적 홉관 삽관술로 치료하였다. 수술 사망자는 없었다.

  • PDF

Surgical Removal of the Lung Lobe Metal Foreign Body in a Dog

  • Hwang, Yawon;Kang, Jihoun;Chang, Dongwoo;Kim, Gonhyung
    • 한국임상수의학회지
    • /
    • 제34권2호
    • /
    • pp.108-111
    • /
    • 2017
  • A 4-year-old, weighing 7.6 kg, castrated male, Pug presented with ingestion of gastric cavity foreign body. Physical examination revealed panting, retching and hyper-salivation. Blood chemistry and complete blood cell count were normal, but hypophosphatemia was observed. An abdominal radiograph revealed the foreign body (FB), round shape and 2 cm length, at the pyloric region of stomach. A thoracic radiograph revealed an incidental metal FB, 3.5 cm length, at the cranial portion of the diaphragm. An upper gastrointestinal endoscopy was performed to remove the FB in the stomach and then a peach-pit was removed. However the metal FB was not found in the esophagus therefore a lateral thoracotomy was performed. A right lateral thoracotomy through the $7^{th}$ intercostal space was accomplished to expose the right caudal lung lobe. After open the thoracic cavity, foreign body was not observed by gross evaluation and caudal lung lobe was attached to the diaphragm. The FB was identified inside the lung lobe and surrounded by granulation tissue. The metal FB (sewing needle) was removed with blunt dissection and incised lung lobe was sutured using absorbable suture material PDS 4-0 with interrupted suture. A thoracotomy tube was inserted into the thoracic cavity during surgery. Patient's respiration became stable after surgery. A chest tube was removed 3 days after surgery. No complications were noted and the dog was discharged 4 days after surgery. In small animal, foreign body ingestion is a common reason for emergency. After ingestion of the FB, perforation through the esophagus and migration to inside the lung lobe is not common in small animals. In this case, thoracic metal FB was identified incidentally and removal of a thoracic FB with thoracotomy was performed successfully.

이용자와 상호대차담당자가 인식하는 외국학술지지원센터(FRIC)의 서비스품질과 고객만족도 분석 (An Analysis of the Service Quality and Satisfaction Perceived by Users and Librarians on the Foreign Research Information Center)

  • 오동근;황재영;여지숙
    • 정보관리연구
    • /
    • 제43권2호
    • /
    • pp.23-42
    • /
    • 2012
  • 이 연구는 외국학술지지원센터의 이용자와 상호대차담당자들을 대상으로 외국학술지지원센터에서 제공하는 서비스에 대한 품질과 고객만족도에 대한 인식을 조사 분석하였다. 외국학술지지원센터의 자체이용자, 최종이용자, 상호대차담당자의 서비스품질 지각과 고객만족도는 상당히 높은 것으로 나타났다. 자체 이용자와 최종이용자간에 만족도와 충성도, 서비스품질에 대한 지각에서 차이가 있는지를 분석한 결과, 자체 이용자가 최종이용자보다 만족도 관련 6개 항목, 충성도 관련 1개 항목, 서비스품질관련 7개 항목에서 통계적으로 유의하게 높은 것으로 나타났다. 자체이용자와 최종이용자에 대한 구조방정식 모형을 설정하고 검증한 결과, 두 모형 모두 적합한 것으로 나타났다. 자체이용자와 최종이용자 양 집단에서 만족도에 유의한 영향을 미치는 요인은 원문복사의 신청 성공률과 제공 자료의 전반적인 상태를 포함한 자료자체인 것으로 나타났다.

영상자료가 지니는 외국어 학습 자료로서의 가치 : 공손한 언어를 중심으로 (The Value of Film as Material for Learning a Foreign Language: Using Posh Discourse)

  • 김혜정
    • 한국콘텐츠학회논문지
    • /
    • 제16권2호
    • /
    • pp.643-651
    • /
    • 2016
  • 본 연구의 목적은 영어권 나라의 영화나 드라마가 외국어 학습 자료로서의 가치가 있는지를 공손한 언어를 중심으로 고찰해 보는 것이다. 영어를 학습할 때 의사소통 능력의 강조로 많은 학습자들은 실용적 표현을 습득하는데 중점을 두는 경향이 있다. 하지만 우리는 살아가면서 같은 말이라도 상대방을 기분 좋게 할 수 있고, 상대방의 호의를 거절하거나 불쾌한 정보를 전달해야 할 경우 상대방의 기분을 고려해서 최대한 신중하고 예의바르게 말하는 경우도 있다. 따라서 우리가 사회적 관계를 맺고 살아나가기 위해서 일상생활 속 공손한 언어의 학습은 필수적이다. 이를 위해서 본 연구에서는 영국 드라마 다운튼 애비(Downton Abbey)를 이용하여 이 드라마에서 사용된 공손한 언어를 분석하고 제 2언어 학습 시 공손한 표현을 의식적으로 학습할 필요가 있음을 강조한다. 또한 실제 교실 현장에서는 이러한 공손한 표현들을 실질적으로 어떻게 학습해야 하는지가 중요하다. 다운튼 애비에 나타난 공손한 언어를 장기 기억으로 내재화하기 위한 조별 학습 활동으로 동영상 촬영하기와 캐릭터 파악하기를 제안한다. 다양한 장르와 다채로운 주제를 지닌 영상자료는 학습자가 학습하고자 하는 외국어의 다양한 언어 기능을 모두 보여줄 수 있는 매우 폭넓은 콘텐츠이다. 외국어 학습자라면 영화나 드라마, 시트콤을 자신의 학습 목적에 맞는 학습 자료로 활용한다면 학습의 동기부여와 흥미 증진에 큰 도움이 될 것이다.

설비용 단열재 난연성 평가 현황과 개선 방안 (A Study on Incombustibility of Building Service System Insulation Material)

  • 박종일;김석현;홍진관;이민우
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2006년도 하계학술발표대회 논문집
    • /
    • pp.999-1005
    • /
    • 2006
  • The aim of this paper is to evaluation survey and improvement method of building service system insulation material incombustibility. In Korea, various insulation materials are being used to prevent energy losses. Performance of insulation materials is gradually advanced, and new insulation materials are developed and being used. We don't have prefer test standard of insulation material incombustibility. In this paper we investigate domestic and foreign standard about incombustibility Through the authors will show how we can improve incombustibility test standard in Korea.

  • PDF

제조 로봇용 서보모터의 양산성능 평가 연구 (A study on the mass production performance evaluation of servomotors for manufacturing robots)

  • 류경하;이태현;박종원;권혁성;강보식
    • 드라이브 ㆍ 컨트롤
    • /
    • 제19권4호
    • /
    • pp.91-96
    • /
    • 2022
  • The performance and reliability of foreign servomotors and domestic servomotors for manufacturing robots were compared and verified. The mass productivity was confirmed by satisfying the requirements of the demanding companies. The servomotor was designed in consideration of mass productivity while satisfying the requirements of the demanding company. It was mounted on a real robot to check its performance and reliability. To secure mass-production performance, we designed and manufactured easy-to-manufacture parts and jigs to manufacture servomotors and achieved the goal of the mass-production evaluation of servomotors through individual performance evaluation, robot mounting test evaluation, and supplementation.