• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.193-199
• /
• 1988

본 연구의 목적은 SCPA방법을 이용한 비선형 2자유도 비감쇠계의 해석을 통하여 응답곡선을 구하고, 그 응답곡선의 분기현상을 규명함에 있다. 결과의 비교를 위하여 4차의 Runge-Kutta방법을 이용한 수치실험을 수행하였다.

• 대한기계학회논문집
• /
• 제7권1호
• /
• pp.11-18
• /
• 1983

For the steady-state solutions of vibratory systems where the dynamics involves nonlinearity and discontinuity, a method of numerical simulation has been normally used. This paper presents a new approach which may overcome some difficulties in the simulation method. This approach is based on the fundamental assumption that the steady-state forced vibration is periodic, so that the problem is formulated as a two-point boundary-value problem and can be solved by Waner's algorithm. This method is demonstrated through the solutions of a linear system, a system with Coulomb friction and an impact pair. It is found that the method gives true solutions well both for linear and nonlinear systems, which convinces us of the usefulness of the method.

• Structural Engineering and Mechanics
• /
• 제24권5호
• /
• pp.543-560
• /
• 2006

In this paper, first, the equations of motion for a rectangular isotropic plate have been derived. This derivation is based on the Von Karmann theory and the effects of shear deformation have been considered. Introducing an Airy stress function, the equations of motion have been transformed to a nonlinear coupled equation. Using Galerkin method, this equation has been separated into position and time functions. By means of the dimensional analysis, it is shown that the orders of magnitude for nonlinear terms are small with respect to linear terms. The Multiple Scales Method has been applied to the equation of motion in the forced vibration and free vibration cases and closed-form relations for the nonlinear natural frequencies, displacement and frequency response of the plate have been derived. The obtained results in comparison with numerical methods are in good agreements. Using the obtained relation, the effects of initial displacement, thickness and dimensions of the plate on the nonlinear natural frequencies and displacements have been investigated. These results are valid for a special range of the ratio of thickness to dimensions of the plate, which is a characteristic of the Multiple Scales Method. In the forced vibration case, the frequency response equation for the primary resonance condition is calculated and the effects of various parameters on the frequency response of system have been studied.

• Wind and Structures
• /
• 제24권5호
• /
• pp.481-500
• /
• 2017

A novel three-degree-of-freedom (DOF) forced vibration system has been developed for identification of aeroelastic (self-excited) load parameters used in time-domain response analysis of wind-excited flexible structures. This system is capable of forcing sinusoidal motions on a section model of a structure that is used in wind tunnel aeroelastic studies along all three degrees of freedom - along-wind, cross-wind, and torsional - simultaneously or in any combination thereof. It utilizes three linear actuators to force vibrations at a consistent frequency but varying amplitudes between the three. This system was designed to identify all the parameters, namely, aeroelastic- damping and stiffness that appear in self-excited (motion-dependent) load formulation either in time-domain (rational functions) or frequency-domain (flutter derivatives). Relatively large displacements (at low frequencies) can be generated by the system, if required. Results from three experiments, airfoil, streamlined bridge deck and a bluff-shaped bridge deck, are presented to demonstrate the functionality and robustness of the system and its applicability to multiple cross-section types. The system will allow routine identification of aeroelastic parameters through wind tunnel tests that can be used to predict response of flexible structures in extreme and transient wind conditions.

• Advances in nano research
• /
• 제14권5호
• /
• pp.475-493
• /
• 2023

In the context of nonclassical nonlocal strain gradient elasticity, this article studies the free and forced responses of functionally graded material (FGM) porous nanoplates exposed to thermal and magnetic fields under a moving load. The developed mathematical model includes shear deformation, size-scale, miscorstructure influences in the framework of higher order shear deformation theory (HSDT) and nonlocal strain gradient theory (NSGT), respectively. To explore the porosity effect, the study considers four different porosity models across the thickness: uniform, symmetrical, asymmetric bottom, and asymmetric top distributions. The system of quations of motion of the FGM porous nanoplate, including the effects of thermal load, Lorentz force, due to the magnetic field and moving load, are derived using the Hamilton's principle, and then solved analytically by employing the Navier method. For the free and forced responses of the nanoplate, the effects of nonlocal elasticity, strain gradient elasticity, temperature rise, magnetic field intensity, porosity volume fraction, and porosity distribution are analyzed. It is found that the forced vibrations of FGM porous nanoplates under thermal and live loads can be damped by applying a directed magnetic field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.396.1-396
• /
• 2002

The AVT under traffic-induced vibrations was carried out on Namhae Suspension bridge in Korea. Mode shapes as well as natural frequencies up to the 15th mode were acquired exactly, and the effect of traffic mass and temperature on measured natural frequencies was investigated. The results from the AVT are compared with those from forced vibration test(FVT) and FE analysis. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.435-440
• /
• 2000

It is shown, in nonlinear two-degree-of freedom system, that the bifurcating modes are created by the stability changes of normal modes. There are four types of stability criterion, each of which gives rise to a distinct functional form of bifurcating modes; the bifurcating mode is born in the form of eigenfunction through which the stability is changed. Then a procedure is formulated to compute the bifurcating mode by the method of harmonic balance. Application of bifurcating mode to forced vibrations is introduced.

• 한국항공우주학회지
• /
• 제35권3호
• /
• pp.218-224
• /
• 2007

PZT와 같은 압전 재료는 능동 진동 억제 분야에서 널리 사용되고 있지만 단일 PZT의 경우 장착 과정에서의 손상, 전기 누전, 낮은 피로 성능과 같은 문제가 지적되고 있다. 이러한 문제를 해결하기 위하여 개발된 LIPCA 작동기는 여러 층의 복합재료와 PZT 층으로 구성되어 있다. 본 연구에서는 LIPCA 작동기를 끝단 질량이 부착된 알루미늄 외팔보의 진동을 억제하는데 적용하였다. 양변위 되먹임 제어 알고리듬을 사용하였으며, 필터 주파수를 대상 모드의 첫 번째 고유진동수에 맞추었다. 실험적으로 구한 알루미늄 보의 고유 진동수는 유한요소 해석의 결과와 잘 일치하였다. LIPCA 작동기를 능동 진동제어에 적용할 때 효율성을 시간과 주파수 영역에서 확인하고자 하였는데, 실험 결과 PPF제어를 사용한 LIPCA 작동기가 자유 진동의 안정화 시간과 강제 진동의 진폭을 효과적으로 제어할 수 있었다. 사례 연구로 다른 두께를 가지는 보의 강제 진동 제어를 수행하였다.

• 한국지진공학회논문집
• /
• 제11권2호
• /
• pp.27-38
• /
• 2007

노스리지 지진에 의해 손상을 받은4층 철근콘크리트조 골조건물을 대상으로 선형가진기 및 대용량의 편심가진기를 이용한 강제진동실험과 상시미진동 측정을 실시하였다. 미진동 가속도데이터 및 선형가진기에 의한 백색잡음 실험시의 가속도데이터로부터 구조물식별을 수행하여 7차모드까지의 고유진동수 및 모드감쇠비를 얻었다. 두대의 대용량 편심가진기를 사용하여 얻은 큰 진폭의 조화 진동하에서는 가속도데이터를 사용하여 각 방향 1차모드를 식별하였으며 변위계와 변형게이지를 이용하여 층간변위각, 기둥과 슬래브와 같은 구조부재의 곡률분포를 측정하였다. 각 경우 고유진동수는 진동의 크기가 클수록 낮아졌다. 즉, 편심가진기가력시 고유진동수는 상시미진동시에 비해 $70{\sim}75%$, 선형가진시가력시에 비해 $92{\sim}93%$ 정도로 낮게 나타났다. 이러한 진동수의 감소폭은 지진에 의해 큰 손상을 받았던 건물의 남북방향에서 크게 나타났다.

• Structural Engineering and Mechanics
• /
• 제34권4호
• /
• pp.507-523
• /
• 2010

Parametric and forced non-linear vibrations of an axially moving rotor both in non-resonance and near-resonance cases have been investigated analytically in this paper. The axial speed is assumed to involve a mean value along with small harmonic fluctuations. Hamilton's principle is employed for this gyroscopic system to derive three coupled non-linear equations of motion. Longitudinal inertia is neglected under the quasi-static stretch assumption and two integro-partial-differential equations are obtained. With introducing a complex variable, the equations of motion is presented in the form of a single, complex equation. The method of multiple scales is applied directly to the resulting equation and the approximate closed-form solution is obtained. Stability boundaries for the steady-state response are formulated and the frequency-response curves are drawn. A number of case studies are considered and the numerical simulations are presented to highlight the effects of system parameters on the linear and nonlinear natural frequencies, mode shapes, limit cycles and the frequency-response curves of the system.