• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.258-263
• /
• 2019

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid and accurate method of evaluating some chemical compositions in forages. The objective of this study was to evaluate the potential of NIRS, applied to imported forage, to estimate the moisture and chemical parameters for imported hays. A population of 392 imported hay representing a wide range in chemical parameters was used in this study. Samples of forage were scanned at 1 nm intervals over the wavelength range 680-2500nm and the optical data was recorded as log 1/Reflectance(log 1/R), which scanned in intact fresh condition. The spectral data were regressed against a range of chemical parameters using partial least squares(PLS) multivariate analysis in conjunction with spectral math treatments to reduced the effect of extraneous noise. The optimum calibrations were selected based on the highest coefficients of determination in cross validation(R²) and the lowest standard error of cross-validation(SECV). The results of this study showed that NIRS predicted the chemical parameters with very high degree of accuracy. The R² and SECV for imported hay calibration were 0.92(SECV 0.61%) for moisture, 0.98(SECV 0.65%) for acid detergent fiber, 0.97(SECV 0.40%) for neutral detergent fiber, 0.99(SECV 0.06%) for crude protein and 0.97(SECV 3.04%) for relative feed value on a dry matter(%), respectively. Results of this experiment showed the possibility of NIRS method to predict the moisture and chemical composition of imported hay in Korea for routine analysis method to evaluate the feed value.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.37-42
• /
• 2009

This experiment was conducted to investigate the effect of cattle manure application on macro contents change in pasture. The treatment consisted of T1: 100% chemical fertilizer (CF 100%), T2: 50% CF+50% cattle manure (CM), T3: 25% CF+75% CM, T4: 100% CM 100%, T5: 100% CM(1st year (yr.) +100% CF (2nd yr.)+100% CM (3rd yr.), T6: 100% CM (1st yr.)+100% CF (2nd yr.)+100% CF (3rd yr.). The highest substitution effect of chemical fertilizer with cattle manure indicated by the highest yield of 11,169 kg/ha was obtained from the application of 100% CM (1 yr.) + 100% CF (2 yr.). The forage yield of plots applied with 100% CM (1 yr.) + 100% CF(2 yr.) was only 4% more than the yield of plots applied with 100% CM. It was only 3% less than the yield of plots applied with 100% CF. In this study, cattle manure application recorded slightly lower forage dry matter (DM) yield than 100% CF application but they were statistically comparable on the third year of production. The all treatments have narrow range of P, K, Ca, Mg and Na contents $0.25{\sim}0.32%,\;3.08{\sim}3.71%,\;0.42{\sim}0.55%,\;0.21{\sim}0.38%$ and $0.08{\sim}0.15%$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.361-370
• /
• 2011

This study was conducted to obtain basic a information on growth characteristics, productivity, and feed values of whole crop barleys with different awn types. The field experiments were conducted on land at Iksan, Jeollabuk-do province in Korea for one year. Six barleys with three different awn types, such as Youngyang (rough), Yuyeon (hood), Youho (hood), Iksan449 (hood), Iksan456 (hood), and Iksan448 (awnless), were used in this study. Barleys were harvested on five growth stages after (DAH); 20 days after heading (20 DAH), 25 DAH, 30 DAH, 35 DAH, and 40 DAH. Heading was earlier in Yuyeon (April 22), while was later in Iksan448 (April 29). The maximum dry matter and total digestible nutrients (TDN) yields, 11.8 and 8.1 ton per ha, respectively, was recorded in Ikan456 harvested at 35~40 DAH, followed by Youngyang, Yuyeon, Iksan448, Youho and the lowest in Iksan449. They were increased significantly with advancing crop maturity. Crude protein content was the highest in Iksan448 (10.9%) and the lowest in Youho (9.7%) and that was decreased significantly with late harvest. Total digestible nutrients (TDN) and relative feed value (RFV) were the highest in Iksan448 (73.0%, 183.8, respectively) and the lowest in Iksan456 (68.0%, 135.4, respectively) and they were increased significantly with late harvest. The mean RFV evaluated by awn types was the highest in Iksan448 (183.8) of awnless, the lowest in Youho (149.5) and Iksan456 (135.4), indicated the insufficiency of hooded type barleys as good fodder use. Therefore, in this study suggest that hooded barley should improve forage productivity as well as quality.

• Korean Journal of Breeding Science
• /
• v.49 no.2
• /
• pp.80-86
• /
• 2017

'Jungmo2501' (Avena sativa L.), a winter oat for forage use, was developed by the breeding team at the National Institute of Crop Science, RDA in 2010. The following is the characteristics of 'Jungmo2501' that is characterized as light green leaf, yellow brown culm and whitish yellow grain. The heading date of 'Jungmo2501' was about 3 days earlier than that of check cultivar 'Samhan'(May 7 and May 10, respectively). Its plant height was 11 cm longer than 103 cm of the check, and the leaf blade ratio of aerial parts was 26 % higher than the check (11.8% and 9.4%, respectively). The cold tolerance, resistance to lodging and wet injury of 'Jungmo2501' were similar to those of the check. The average forage dry matter yield of 'Jungmo2501' harvested at milk-ripe stage was 5% higher than the check ($15.5ton\;ha^{-1}$ and $14.7ton\;ha^{-1}$, respectively). 'Jungmo2501' was higher than the check in terms of protein content (6.6% and 5.9%, respectively), neutral detergent fiber (58.5% and 57.6%, respectively), and acid detergent fiber (34.5% and 32.1%, respectively), while total digestible nutrients was lower than the check (61.6% and 63.6%, respectively), and TDN yield was $0.37ton\;ha^{-1}$ more than that of the check ($9.71ton\;ha^{-1}$ and $9.34ton\;ha^{-1}$, respectively). The silage grade of 'Jungmo2501' estimated by Flig score showed level II, meaning good quality. Fall sowing cropping of 'Jungmo2501' is recommended only for areas where average daily minimum mean temperatures in January are higher than $-6^{\circ}C$.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.600-605
• /
• 2010

'Dagreen' (Scale cereal L.), a new rye variety was developed from the open pollination among 10 rye lines at the National Institute of Crop Science in 1995 and mass selection were made at National Institute of Crop Science from 1996 to 1999. Recurrent selections were made at Dept. Rice and Winter Cereal Crop, NICS, RDA from 2000 to 2006. This new variety has erect plant type with medium size pale green leaves. The number of spike per $m^2$ was 713 and the plant height was 103cm. The heading date of 'Dagreen' was April 24 which was 7 days earlier than that of "Koolgrazer". It was adaptable for forage use at an early stage as a whole crop. Lodging resistance was higher than that of check variety 'Koolgrazer'. The chemical components and quality of forage showed 10.2 % crude protein, 36.6 % ADF, 62.4 % NDF and 59.9 % TDN. 'Dagreen' showed high resistance to powdery mildew and leaf rust than those of check variety in the field condition. The average dry matter (7,010kg $ha^{-1}$) of 'Dagreen' harvested at April 28 were 6 % higher than 'Koolgrazer'. This variety is recommended for all of the rye cultivation area in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.301-309
• /
• 1985

This experiment was conducted to know a substantial body of information about the differences of the important forage characteristics; green fodder yield, dry matter yield, TDN%, TDN yield and so forth of the seven cultivars selected as the forage crops (Rye, Triticale, Wheat and Barley) depending on the specific times of cutting stage, on the Wheat and Barley Research Institute from October, 1983 to June, 1984, and the results summarized as follows. Green fodder yield & dry matter weight, when clipped at 20, 30 April and 10 May, of varieties Homil #2 showed the most yielding capacity, but when clipped at 20 May, Suweon#8 (triticale) showed the most green fodder yield whereas Homil #1 the most significant dry matter weight. Plant height, in the cases of Paldanghomil, Homil #1 & Homil #2, showed distinctly longer than that of Bunong, Suweon #8 & Suweon #9 and continued to grow even after the heading date. Dry matter ratio increased with time (Dry matter yield/green fodder yield x100). TDN % decreased but TDN yield increased with time but Homil #1, Homil #2 and Paldanghomil showed relatively the higher values. In the elements of nutrient of cell wall, Suweon #8 & Bungong among 7 cultivars have good quality. The reasonable clipping date of wheat &barley as green fodder crops are 10 May to 20 May, but if clipped before 10 May and 20 May, Homil #2 and Suweon #8 became the promising forage crops, respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.350-356
• /
• 2016

The objective of this study was to evaluate the effect of different dietary corn levels in Total Mixed Rations (TMR) on growth and meat quality of castrated Korean black goats. For feeding trials, thirty-two castrated Korean black goats with similar age (average of 3 months) and body weight (average of 15.9 kg) were divided into the following four treatment groups: commercial feed (control), TMR containing 15% of corn (T1), TMR containing 25% of corn (T2), and TMR containing 35% of corn (T3) in a randomized complete block design. Final body weight was the highest in T2 (58.9 kg), followed by that in control group (53.1 kg). Average daily gain (ADG) and total dry matter intake (TDMI) were also the highest in T2 (100.2 g and 1,346 g, respectively). However, feed conversion ratio (13.4) was the lowest in T2. Carcass weight and dressing percentage in T2 and T3 were higher than those in the control. For meat quality characteristics, crude fat content was the highest in T2 (6.54%). Cooking loss (15.2%) was the lowest in the control. However, the control had the highest flavor value (5.3%). Oleic acid (C18:l) and palmitic acid (C16:0) were the highest in T2 (48.6% and 22.4%, respectively). Stearic acid (C18:0) was the highest in T1 (14.5%). Unsaturated fatty acid was the highest in the control (58.8%), followed by that in T3 (58.2%), T2 (57.8%), and T1 (54.4%). These results indicate that TMR containing 25% of corn could improve the growth performance and meat quality of castrated Korean black goats.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.264-271
• /
• 2019

This study was conducted to investigate the effect of whole crop rice based TMR on the meat quality of Korean Native Cattle (Hanwoo). Sixteen Hanwoo steers (average 8 months old) were divided into the control group (commercially marketed TMR) and the WCR-TMR group (whole crop rice based TMR). Feeding trials were carried out up to 30 months of age, and after slaughter, the strip loin were collected and analyzed for meat quality. There were no significant differences in proximate compositions of Hanwoo (P>0.05), and crude protein, crude fat and crude ash were 19.51~20.23 %, 11.53~11.35 % and 1.10~1.12 %, respectively. There was no significant difference in water holding capacity and cooking loss between treatments (P>0.05), but it was slightly lower in the control group. Among the various functional components in meat, β-carotene was not detected, but α-tocopherol was significantly higher in WCR-TMR group and vitamin A content in control (P<0.05). The a^⁎-value in the meat color index decreased significantly with longer storage period in the control group, whereas the WCR-TMR fed group showed no significant difference (P>0.05) according to the storage period. There were no difference between the treatments in the TBARS (2-Thiobarbituric acid reactive substances) value used as an indicator of lipid oxidation and in fatty acid content. But the control group had high myristic acid content, whereas the WCR-TMR supplemented group showed higher oleic acid and linoleic acid content. In conclusion, feeding of WCR based-TMR increased the α-tocopherol content, which is a functional ingredient in meat, and the other components were not significantly different from the control. Therefore, it was judged that there was no significant difference between WCR based and conventional TMR in meat quality characteristics.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.1 no.1
• /
• pp.18-28
• /
• 1978

To study about the effect of harvested stage and physical treatment such as wilting or chopping of plant material on the quality of silage, Italian ryegrass(Lolium multiflorum) harvested at pre-headed or heading stage and Seombadi(Dystaenia takesimana Nakai) harvested at pre-flowering stage, were used for the purpose. The materials were treated in four different ways which were a) non-treated, b) one day-wilted, c) chopped with 1 to 2cm length and d) wilted and chopped, and those were ensiled in plastic containers and stored at room temperature for three months. After three months of storage, it was investigated and obtained the following results. 1) Having 6.31 of NFE/CP ratio and low content of crude fiber, Seombadi contained more suitable constituents for silage than Italian ryegrass. 2) Under the non-treated or chopped condition, the loss of NFE was higher, and lower with wilted material. 3) Wilting or chopping improved DM digestibility. 4) Compared with Italian ryegrass harvested at pre-headed stage, the storage amount per unit volume of heading stage-Italian ryegrass and Seombadi were higher 8% and 69% respectively, and wilting and/or chopping increased the storage amount 41 to 134%. 5) The majority of weight loss during storage was observed at 1st week after ensiling, it continued slightly until 4th week. The highest loss in 8th week were 3.76% of nontreated material. 6) One day wilting increased DM content of silage 23 to 131%. Wilting and chopping increased pH and lactic acid improved the quality considerably. 7) The correlation between $NH_3$ and butyric acid, and between lactic acid and DM were r=0.782**, r=0.634** respectively. The regression equation were y=12.853X+4.908 (X=butyric acid), y=0.016X+1.309(X=DM content), respectively. 8. The above results indicate that it is necessary to wilt or chop material to make good quality silage from Italian ryegrass, and such treatment can improve the quality of silage with Seombadi also.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.1
• /
• pp.53-62
• /
• 2006

Near infrared reflectance spectroscopy (NIRS) has been increasingly used as a rapid, accurate method of evaluating some chemical compositions in forages. Analysis of forage quality by NIRS usually involves dry ground samples. Costs might be reduced if samples could be analyzed without drying or grinding. The objective of this study was to investigate effect of sample preparations and spectral math treatments on prediction ability of chemical composition for corn silage by NIRS. A population of 112 corn silage representing a wide range in chemical parameters were used in this investigation. Samples of com silage were scanned at 2nm intervals over the wavelength range 400-2500nm and the optical data recorded as log l/Reflectance(log l/R) and scanned in overt-dried grinding(ODG), liquid nitrogen grinding(LNG) or intact fresh(IF) condition. Samples were analysed for neutral detergent fiber(NDF), acid detergent fiber(ADF), acid detergent lignin(ADL), crude protein(CP) and crude ash content were expressed on a dry-matter(DM) basis. The spectral data were regressed against a range of chemical parameters using modified partial least squares(MPLS) multivariate analysis in conjunction with four spectral math treatments to reduce the effect of extraneous noise. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation(SECV). The results of this study show that NIRS predicted the chemical parameters with very high degree of accuracy(the correlation coefficient of cross validation$(R^2cv)$ range from $0.70{\sim}0.95$) in ODG. The optimum equations were selected on the basis of minimizing the standard error of prediction(SEP). The Optimum sample preparation methods and spectral math treatment were for ADF, the ODG method using 2,10,5 math treatment(SEP = 0.99, $R^2v=0.93$), and for CP, the ODG method using 1,4,4 math treatment(SEP = 0.29. $R^2v=0.91$).