• Proceedings of the Korean Society of Crop Science Conference
• /
• 2019.09a
• /
• pp.5-5
• /
• 2019

The objectives of this paper are (i) to analyze past trends and future directions of rice production, consumption and trade across the world and (ii) to discuss emerging challenges and future directions in the global rice industry. Rice is a staple food of over half of the world's 7.7 billion people. It is an important economic, social, political, and cultural commodity in most Asian countries. Rice is the $1^{st}$ most widely consumed, $2^{nd}$ largely produced, and $3^{rd}$ most widely grown food crop in the world. It was cultivated by 144 million farms in over 100 countries with harvested area of over 163 million ha producing about 745 million tons paddy in 2018. About 90% of the total rice is produced in Asia. China and India, the biggest rice producers, account for over half of the world's rice production. Between 1960 and 2018, world rice production increased over threefold from 221 to 745 million tons (2.1% per year) due to area expansion from 120 to 163 million ha (0.5% per year) and paddy yield increase from 1.8 to 4.6 t/ha (1.6% per year). The Green Revolution led massive increase in rice production prevented famines, provided food for millions of people, reduced poverty and hunger, and improved livelihoods of millions of Asians. The future increase in rice production must come from yield increase as the scope for area expansion is limited. Rice is the most widely consumed food crop. The world's average per capita milled rice consumption is 64 kilograms providing 19% of daily calories. Asia accounted for 84% of global consumption followed by Africa (7%), South America (3%), and the Middle East (2%). Asia's per capita rice consumption is 100 kilograms per year providing 28% of daily calories. The global and Asian per capita consumption increased from the 1960s to the 1990s but stable afterward. The per capita rice consumption is expected to decline in Asia but increase outside Asia especially in Africa in the future. The total milled rice consumption was about 490 million tons in 2018 and projected to reach 550 million tons by 2030 and 590 million tons by 2040. Rice is thinly traded in international market because it is a highly protected commodity. Only about 9% of the total production is traded in global rice market. However, the volume of global rice trade has increased over six-fold from 7.5 to 46.5 million tons between the 1960s and 2018. A relatively small number of exporting countries interact with a large number of importing countries. The top five rice exporting countries are India, Thailand, Vietnam, Pakistan, and China accounting for 74% of the global rice export. The top five rice importing countries are China, Philippines, Nigeria, European Union and Saudi Arabia accounting for 26% of the global rice import. Within rice varieties, Japonica rice accounts for the highest share of the global rice trade (about 12%) followed by Basmati rice (about 10%). The high concentration of exports to a few countries makes international rice market vulnerable to supply disruptions in exporting countries, leading to higher world prices of rice. The export price of Thai 5% broken rice increased from 198 US$/ton in 2000 to 421 US$/ton in 2018. The volumes of trade and rice prices in the global market are expected to increase in the future. The major future challenges of the rice industry are increasing demand due to population growth, rising demand in Africa, economic growth and diet diversification, competition for natural resources (land and water), labor scarcity, climate change and natural hazards, poverty and inequality, hunger and malnutrition, urbanization, low income in rice farming, yield saturation, aging of farmers, feminization of agriculture, health and environmental concerns, improving value chains, and shifting donor priorities away from agriculture. At the same time, new opportunities are available due to access to new technologies, increased investment by the private sector, and increased global partnership. More investment in rice research and development is needed to develop and disseminate innovative technologies and practices to overcome problems and ensure food and nutrition security of the future population.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.896-904
• /
• 2010

HACCP is a scientific and systematic program that identifies specific hazards and gives measurements in order to control them and ensure the safety of foods. Transportation of livestock and its products is one of the vulnerable sectors regarding food safety in Korea, as meats are transported by truck in the form of a carcass or packaged meat in a box. HACCP application and its acceleration of distribution, in particular transportation, are regarded as important to providing consumers with ultimately safe livestock products. To achieve this goal, practical tools for HACCP application should be developed. Supply chain management (SCM) is a holistic and strategic approach to demand, operations, procurement, and logistics process management. SCM has been beneficially applied to several industries, notably in vehicle manufacture and the retail trade. HACCP-based real-time visibility system using wireless application (WAP) of the livestock distribution is centralized management system that enables control of temperature and HACCP management in real-time for livestock transportation. Therefore, the application of HACCP to livestock distribution (transportation, storage, and sale) can be activated. Using this system, HACCP management can be made easier, and distribution of safe livestock products can be achieved.

• Journal of Food Hygiene and Safety
• /
• v.28 no.4
• /
• pp.324-329
• /
• 2013

This study investigated and evaluated contamination levels of bacteria on tomatoes at farms stage to evaluate potential hazards associated with fresh tomatoes. A total of 170 samples, 90 samples from 5 sampling sites from 18 farms and 80 samples from 1 sampling site from 4 farms every month for four months, were analyzed to enumerate aerobic bacterial counts, coliforms, E. coli, Bacillus cereus, Staphylococcus aureus, Escherichia coli, E. coli O157:H7, Salmonella spp., and Listeria monocytogenes. Aerobic bacterial counts ranged from 0.48 to 6.15 Log CFU/g, with the lowest and the highest bacterial cell counts recorded for A site and E site, respectively. Thirty five percent of the samples from the E site contained more than 2 Log CFU/g. Six samples (6.6%) of 90 samples contained B. cereus less than 1 Log CFU/g. In addition, the contamination level of indicator bacteria and B. cereus in tomatoes were higher on March than on April, May and June (P < 0.05). S. aureus, E. coli, E. coli O157:H7, Salmonella spp. and L. monocytogenes were not detected in the tomato samples. The microbial contamination levels of tomatoes determined in this study may be used as the data for microbiological risk assessment.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.3-40
• /
• 2020

The term "accident" in the Warsaw Convention of 1929 and the Montreal Convention of 1999, which govern carrier liability in international air transport, is an important criterion for determining carrier liability. However, because there is no explicit definition of the term in the treaty provisions, the term is largely subjected to the judgment and interpretation of the courts. Although there have been numerous changes in purpose and circumstance in the transition from the Warsaw regime to the conclusion of the Montreal Convention, there was no discussion on the concept of "accident" therefore, even after the adoption of the Montreal Convention, there is no doubt that the term is to be interpreted in the same manner as before. On this point, the United States Supreme Court's Air France v. Saks clarified the concept of "accident" and is still cited as an important precedent. Recently, the CJEU, in GN v. ZU, presented a new concept of "accident" introduced in the Montreal Convention: that "reference must be made to the ordinary meaning" in interpreting "accident" and that the term "covers all situations occurring on aboard an aircraft." Furthermore, the CJEU ruled that the term does not include the applicability of "hazards typically associated with aviation," which was controversial in previous cases. Such an interpretation can be reasonably seen as the court's expansion of the concept of "accident," with a focus on "protecting consumer interests," a core tenet of both the Montreal convention and the European Union Regulations(EC: No 889/2002). The CJEU's independent interpretation of "accident" is a departure from the Warsaw Convention and the Saks case, with their focus on "carrier protection," and instead focuses on the "passenger protection" standard of the Montreal Convention. Consequently, this expands both the court's discretion and the carrier's risk management liability. Such an interpretation by the CJEU can be said to be in line with the purpose of the Montreal Convention in terms of "passenger protection." However, there are problems to be considered in tandem with an expanded interpretation of "accident." First, there may be controversy concerning "balance" in that it focused on "passenger protection" in relation to the "equitable balance of interests" between air carriers and passengers, which is the basic purpose of the agreement. Second, huge losses are expected as many airlines fly to countries within the European Union. Third, there is now a gap in the interpretation of "accident" in Europe and the United States, which raises a question on the "unity of rules," another basic tenet of the Convention. Fourth, this interpretation of "accident" by the CJEU raises questions regarding its scope of application, as it only refers to the "hazards typically associated with aviation" and "situations occurring aboard an aircraft." In this case, the CJEU newly proposed a novel criterion for the interpretation of "accident" under the Montreal Convention. As this presents food for thought on the interpretation of "accident," it is necessary to pay close attention to any changes in court rulings in the future. In addition, it suggests that active measures be taken for passenger safety by recognizing air carriers' unlimited liability and conducting systematic reforms.

• Korean Journal of Poultry Science
• /
• v.50 no.1
• /
• pp.41-50
• /
• 2023

Over the last decade, avian influenza (AI) has been considered an emerging disease that would become the next pandemic, particularly in countries like South Korea, with continuous animal outbreaks. In this situation, risk assessment is highly needed to prevent and prepare for human infection with AI. Thus, we developed the risk assessment matrix for a high-risk area of human infection with AI in South Korea based on the notion that risk is the multiplication of hazards with vulnerability. This matrix consisted of highly pathogenic avian influenza (HPAI) in poultry farms and the number of poultry-associated production facilities assumed as hazards of avian influenza and vulnerability, respectively. The average number of HPAI in poultry farms at the 229-municipal level as the hazard axis of the matrix was predicted using a negative binomial regression with nationwide outbreaks data from 2003 to 2018. The two components of the matrix were classified into five groups using the K-means clustering algorithm and multiplied, consequently producing the area-specific risk level of human infection. As a result, Naju-si, Jeongeup-si, and Namwon-si were categorized as high-risk areas for human infection with AI. These findings would contribute to designing the policies for human infection to minimize socio-economic damages.

• Journal of Food Hygiene and Safety
• /
• v.22 no.2
• /
• pp.82-87
• /
• 2007

This research was performed to investigate chemical and microbiological hazards of Ready-to-eat(RTE) compound foods which uses the by-product of meat. For this experiment, 51 samples of RTE compound foods in by-product of meat distributed in Incheon from January to December 2006 were tested. The contents of heavy metals in the main ingredient of RTE compound foods were in the range of $0.073{\sim}0.112ppm$ for lead (Pb), $0.006{\sim}0.013ppm$ for cadmium (Cd) and $0.746{\sim}0.978ppb$ for mercury (Hg). The concentrations of residual ABS(alkyl benzene sulfate) in the small intestine which is a main ingredient of Gopchang-casserole were $$0.8ppm{\sim}57.6ppm$ (Ave. 10.3ppm). Staphylococcus aureus was isolated from 11 samples (21.6%) among 51 main ingredients of RTE compound foods. The isolation rates of Salmonella spp. and Clostridium perfringens were 2.0% (1/51) and 5.9% (2/51), respectively. By types of main ingredient, the small intestine was showed the highest isolation rate as 35.3% (12/34), ham and the sausage which are main ingredients of the Budae-pot stew were 25% (2/8) and other meat products were 20% (1/5). Food poisoning bacteria was not found in the blood of pig which is a main ingredient of the Sunji-pot stew. 28.4% (27/95) of sauce included in each RTE compound foods were coliform bacteria positive. Pesticide residues were found in four of 45 vegetables which are the additional ingredient of RTE compound foods. The concentrations of pesticide were chlorothalonil 2.8 ppm, EPN 10.3 ppm, chlorpyrifos 0.4ppm and indoxacarb 0.7ppm. In 33 bean sprout samples, captan and carbendazim were not detected.

• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.104-110
• /
• 2013

This study assessed hazards at the harvest stage of strawberry farms which may cause risk to humans. A total of 216 samples were collected from 6 strawberry farms (soil culture farms: A, B, C; nutriculture farms: D, E, F) located in Western Gyeongnam. The collected samples were subjected for sanitary indicator bacteria (aerobic plate count, coliforms and Escherichia coli), major foodborne pathogens (E. coli O157:H7, Listeria monocytogenes, Salmonella spp., Staphylococcus aureus and Bacillus cereus), and fungi. The levels of APC and coliform in the soil culture farms were 1.0-6.9 and 0.4-4.6 log CFU/g (leaf, mL, hand or 100 $cm^2$), respectively. The samples obtained from the nutriculture farms were contaminated with the levels of 0.8-4.9, and 0.2-2.6 log CFU/g (leaf, mL, hand or 100 $cm^2$) of APC and coliform. However, E. coli was not detected in any samples. In major foodborne pathogens, S. aureus was detected at the level of ${\leq}$3.3 log CFU/hand in workers' hand samples and B. cereus was detected at the levels of 0.4-4.1 log CFU/g (hand or 100 $cm^2$) in soil, plants and workers' hygiene. L. monocytogenes, E. coli O157:H7 and Salmonella spp. were not detected. Fungi were detected at the levels of 1.0-5.2 and 0.2-4.4 log CFU/g (leaf, mL, hand or 100 $cm^2$) in soil culture and nutriculture farms, respectively.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.442-452
• /
• 2010

Our team carried out a new program for public engagement on nanotechnology in Korea. We chose 22 monitors, who majored in science or technology and graduated from universities long time ago. Most of them were married and housewives. This 'focus group' had not only general knowledge about science or technology but also much interest in social activities. The 167 nanoproducts to be monitored were for daily life, e.g. home appliances (washing machine, refrigerator, water purifier, etc), clothing, cosmetics, food, toy, and others. And the period of it was one month. The monitors had a sheet with 10 questions, and filled them out in essay form. All of them submitted 2~3 sheets every weekend to our team. Before monitoring, our team had a meeting for introduction and explanation about the potential risk of nanotechnology as well as benefits from it. Another meeting was held after finishing monitoring to share their experience one another. The main results of the monitoring were as follows: the number of nanoproducts describing both the definition of 'nano' and the size of nanomaterials was just 2 (1.2%) the number of them explaining the technical methods enough was 15 (9/0%) the number of them accounting for the reason of functional improvement enough was 14(8.4%); the number of them doubtful as if there would be exaggeration or false knowledge was 27 (16.2%); the number of them commenting potential hazards to human health or environment was almost zero; the number of them describing about safety certification acceptable was 9 (5.4%). The monitors made a proposal containing recommendation to Government and industry. The contents were as follows: industry should make the manual in detail and correctly, Describe Certificate detailed and correctly, Do research on risk and toxicity continually, Educate employee about nanoproducts at consumer's center; Government should make indication of nanoproducts compulsory, Appoint Certificate Authority and make Certificate Mark guaranteeing the safety on nanoproducts, Make detailed explanation about nanoproducts compulsory.

• Journal of vocational education research
• /
• v.37 no.1
• /
• pp.119-138
• /
• 2018

The purpose of this study was to analyze the factors influencing of separation and the time of separation for middle and old aged self-employed workers. The cox proportional hazards model was used in the first survey of KLoSA, 684 persons who were over 40 years old in 2006, using data up to the 5th period of 2014. The main findings of this study are as follows. First, the average duration of job for middle and old aged self-employed workers in 2005 was 15.5years. Of the total 684 workers, 214(31.3%) person was found to have lost their job during survey period. Second, gender, age at start up, and education level have significant effects on job separation of them. When women, when they were older at start up, when they were graduate the university or higher, increased their risk of leaving their businesses. Third, in the characteristic of their work, the type of job and job satisfaction were found to affect to job desertion. When people are engaged in accommodation and food business rather than agriculture and forestry fishery, when the satisfaction of the work is lower, the risk was high. Based on these conlusions, the following implications are suggested. First, it is necessary to establish a support strategy for female middle-aged and old self-employed and older workers who start their own business after their 60s. Second, it is necessary to support them to enter into various fields by utilizing their own aptitude and experience rather than establishing them in industries with low entry barriers. Third, it is necessary to develop policies to help improve job satisfaction in the working environment. In particular, it is necessary to ensure that high educated self-employed workers are satisfied with various compensations by self-employed.

• Journal of Biomedical Engineering Research
• /
• v.44 no.6
• /
• pp.363-376
• /
• 2023

According to the COVID-19, development of various medical software based on IoT(Internet of Things) was accelerated. Especially, interest in a central software system that can remotely monitor and control ventilators is increasing to solve problems related to the continuous increase in severe COVID-19 patients. Since medical device software is closely related to human life, this study aims to develop central monitoring system that can remotely monitor and control multiple ventilators in compliance with medical device software development standards and to verify performance of system. In addition, to ensure the safety and reliability of this central monitoring system, this study also specifies risk management requirements that can identify hazardous situations and evaluate potential hazards and confirms the implementation of cybersecurity to protect against potential cyber threats, which can have serious consequences for patient safety. As a result, we obtained medical device software manufacturing certificates from MFDS(Ministry of Food and Drug Safety) through technical documents about performance verification, risk management and cybersecurity application.The purpose of this study is to conduct a usability assessment to ensure that ergonomic design has been applied so that the ventilator central monitoring system can improve user satisfaction, efficiency, and safety. The rapid spread of COVID-19, which began in 2019, caused significant damage global medical system. In this situation, the need for a system to monitor multiple patients with ventilators was highlighted as a solution for various problems. Since medical device software is closely related to human life, ensuring their safety and satisfaction is important before their actual deployment in the field. In this study, a total of 21 participants consisting of respiratory staffs conducted usability test according to the use scenarios in the simulated use environment. Nine use scenarios were conducted to derive an average task success rate and opinions on user interface were collected through five-point Likert scale satisfaction evaluation and questionnaire. Participants conducted a total of nine use scenario tasks with an average success rate of 93% and five-point Likert scale satisfaction survey showed a high satisfaction result of 4.7 points on average. Users evaluated that the device would be useful for effectively managing multiple patients with ventilators. However, improvements are required for interfaces associated with task that do not exceed the threshold for task success rate. In addition, even medical devices with sufficient safety and efficiency cannot guarantee absolute safety, so it is suggested to continuously evaluate user feedback even after introducing them to the actual site.