• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.145-152
• /
• 2013

Objective: The aim of this study is to develop an ergonomic office chair that has an alarm function for the unbalanced sitting postures. Background: Contrary to expectation, it is reported that office workers sit on their chairs much more in unbalanced postures during daily work. Even though an office worker uses an ergonomically good-designed chair and begins their work in a good sitting posture, his/her posture is likely to shift to the unbalanced bad posture. Therefore, a posture alarm system would be very helpful in keeping office workers' good postures. Method: We developed a prototype chair with four load cells under a seat pan and one load cell beneath a backrest. Through some experiments, we set the criteria for unbalanced bad postures then implemented the criteria into the alarm system of the prototype chair. The chair called e-BASE chair could detect unbalance postures and show alarms for chair users. We also enhanced back support by developing a step-wised folding backrest. Results: The e-BASE chair showed better performance in interface pressure distributions and balanced posture ratio in VDT work. Conclusion: The ergonomic chair with posture alarm function(e-BASE chair) was developed. It showed better performance in seat pressure distribution and in keeping good posture during office work. Application: The posture alarm system and folding backrest can be applied to the new models of office chair.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2002.10a
• /
• pp.121-124
• /
• 2002

This work was initiated to develope a recombinant oral poliovaccine (OPV), which is highly advanced in safety (minimizing VAPP) by introducing Type 2,3 poliovirus epitopes into our RPS-Vax system. We have introduced several potential vaccine epitopes of poliovirus Type 2, and 3 into RPS-Vax system, resulting in production of recombinant polioviruses. Any of these chimeric viruses, however, were not detected for their foreign gene expression by serotype-specific mouse antiserum. We have designed several folding units to stabilize the introduced vaccine protein and attached short epitope-concatamer or epitope-multimer to them, followed by production of chimeric viruses. Only those who have an HIV-1 Tat-mediated folding unit were nicely detected for the introduced foreign proteins by anti-Tat antiserum and type-specific peptide-induced antisera. Nevertheless, introduced epitopes were not detected in Western blot experiment with each serotype-specific antiserum. None of the mice inoculated with these chimeric viruses showed preventative immunity when challenged with Lansing and Leon wildtype 2 and 3 poliovirus, and the antiserum did not show neutralizing capacity in vitro. Conformational epitope covering B/C loop region of type 2 and 3 were newly designed by computer modeling, and introduced into the RPS-Vax vector system, followed by production of chimeric viruses. Introduced epitope regions were nicely detected by anti-Tag23 mAb or peptide antibody, but still not detected by poliovirus antiserum. Nevertheless, neutralizing antibody was detected in the Tg-PVR mice even when inoculated once with these chimeric viruses. Also, the immunized mice showed perfect preventative immunity against the wild Type poliovirus Lancing or Leon. When boosted appropriately, those chimeric virus-inoculated Tg-PVR mice produced equivalent amounts of neutralizing antibody to those in Sabin 2/3-immunized mice. These data strongly suggest that our recombinant poliovirus (RPS-PV2 and RPS-PV3) can be used as a safe and effective rec-OPV instead of any preexisting poliovaccine.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.957-962
• /
• 1994

Real-time RELP vocoder is implemented on the TMS320C25 DSP chip. The implemented system is IBM-PC add-on board and composed of analog in/out unit, DSP unit, memoy unit, IBM-PC interface unit and its supporting assembly software. Speech analyzer and synthesizer is implimented by DSP assembly software. Speech parameters such as LPC coefficients, base-band residuals, and signal gains is extracted by autocorrelation method and inverse filter and synthesized by spectral folding method and direct form synthesis filter in this board. And then, real-time RELP vocoder with 9.6Kbps is simulated by down-loading method in the DSP program RAM.

• Proceedings of the Korean Biophysical Society Conference
• /
• 1999.06a
• /
• pp.39-39
• /
• 1999

Single chain-monellin (SCM) was recently constructed by fusing the two chains of monellin. From the view of protein folding, SCM serves as an ideal model system especially in tackling ${\alpha}$-helix-${\beta}$-sheet interactions due to the following reasons： First, it consists of simple distinct structural elements (${\alpha}$-helix and ${\beta}$-sheet) which are assembled in a perpendicular manner.(omitted)

• 한국기계연구소 소보
• /
• s.14
• /
• pp.157-168
• /
• 1985

In cargo vessels, hatch covers are used to prevent sea water from penetrating into the cargo hold and to keep the vessels buoyant. And also they can be used as cargo loading devices as in container ships. In this paper, hatch covers are classified according to their operation method and their characteristics are briefly demonstrated. Systematic description on the scantling of the hatch cover panel and how to determine the capacity of the hydraulic power system fir folding hatch cover panels are also presented. The hydraulic power system is selected from the result of dynamic analysis of the movements of the hatch cover panels when stored on the upper deck. The hatch coaming height is determined as shortly as the hydraulic cylinders can be installed. This study deals with the hatch cover system of the medium sized multi-purpose cargo vessel, but the results of this study can be applied to large-sized cargo vessels with a slight change of the input data in the calculations. Further research on the high pressure pump, hydraulic cleating system and hydraulic piping will realize domestic production of the whole hatch cover system which have been supplied from foreign makers until now

• Korean Institute of Interior Design Journal
• /
• no.37
• /
• pp.21-28
• /
• 2003

Transformation of complexity and diverse life style of contemporary men have call for increase in demand of single's and couple's living space of one-room apartment. Feasibility for intensive use of one-room apartment, regardless of it's openness and flexible character, multiple function in a single concentrated room without privacy and lack of confrontation of the changes in diverse living pattern enhance uniformity which reflects as an essential problem. Therefore, this study is to present a direction of one-room apartment interior space planning to differentiate from the existing system of uniformity and it's problems. Within the concept of flexibility, establishment of the flexibility factors for the application of hinged system with a movable furniture to compose a flexible space. In conclusion, the applications of hinged system concept of sliding, folding, over-hangings, are applied in existing one-room apartment plan to enhance flexible space planning which to drive in motivation and adaptation of the dweller's life cycle.

• The Mathematical Education
• /
• v.45 no.2 s.113
• /
• pp.165-176
• /
• 2006

In this paper, we consider changes of algebra strands around the world. And we suggest needs of designing new computer environment where we make and manipulate geometric recursive patterns. For this purpose, we first consider relations among symbols, meanings and patterns. And we also consider Logo environment and characterize algebraic features. Then we introduce L-system which is considered as action letters and subgroup of turtle group. There are needs to be improved since there exists some ambiguity between sign and action. Based on needs of improving the previous L-system, we suggest new commands in JavaMAL microworld. So we design a microworld for recursive patterns and consider meanings of letters in new environments. Finally, we consider the method to integrate L-system and other existing microworlds, such as Logo and DGS. Specially, combining Logo and DGS, we consider the movement of such tiles and folding nets by L-system commands. And we discuss possible benefits in this environment.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.31-40
• /
• 2015

This study aims to comprehend that Seokpajeong garden for aspect of space change. Spatial characteristics according to the transfer of ownership are classified as period. And investigate the aspect of space change in Seokpajeong garden based on literature and painting, newspaper, photo. The results were as follows. First, Investigate the construction and change of Seokpajeong garden. Accordingly, spatial characteristics of Seokpajeong garden are classified into three period. 1st period is Kim-Heung Keun owned Samgyedong-jungsa garden. 2nd period is Daewongun hold Seokpajeong garden. 3rd period is damaged original form of Seokpajeong garden from Korean War to current time inclusive. Secondly, Kim-Heung Keun owned Samgyedong-jungsa garden has characteristics of water system centric space and many buildings. In addition accept foreign culture like chinese pavilion and Byeoldang Villa. and plant unique flower and leaf in garden. Thirdly, According to Seokpajeong garden folding screen, Daewongun owned Seokpajeong garden accept organization of space in Samgyedong garden. But different locations of Sarangchae in folding screen means possibility of move building to current position. So, additional historical research is required with representation of chinese pavilion location. Fourthly, Seokpajeong garden was damaged from original form to frequent changes of ownership. Transform of geographical features and water system as well as Anchae and Sarangchae, back side of a outbuilding are only the remained among many buildings. Also, Seokpajeong garden is more fell to the subsidiary facility of Seoul Museum than Wonrim. Therefore restoration and recovery of original form are urgent.

• Journal of the Korean earth science society
• /
• v.31 no.4
• /
• pp.354-369
• /
• 2010

The synoptic and kinematic characteristics of a heavy rainfall that occurred in Gangneung region on 22 to 24 October 2006 were investigated using weather maps, infrared images, AWS observation data and NCEP global final analyses data. The total amount of rainfall observed in the region for the period was 316.5 mm, and the instanteneous maximum wind speed was $63.7m\;s^{-1}$. According to the analysis of weather maps, before the starting of the heavy rainfall, an extratropical low pressure system was developed in the middle region of the Korean Peninsula, and an inverted trough was formed in the northern region of the peninsula. In addition, a jet stream on the upper charts of 300 hPa was located over the Yellow Sea and the southern boundary of the peninsula. A cutoff low in the cyclonic shear side of the upper jet streak, which was linked to an anomaly of isentropic potential vorticity, was developed over the northwestern part of the peninsula. And there are analyzed potential vorticity and wind, time-height cross section of potential vorticity, vertical air motion, maximums of the divergence and convergence and vertical distribution of potential temperature in Gangneung region. The analyzed results of the synoptic conditions and kinematic processes strongly suggest that the tropopause folding made a significant role of initializing the heavy rainfall.

• Journal of Aerospace System Engineering
• /
• v.12 no.3
• /
• pp.70-78
• /
• 2018

This research was carried out to develop an integrated folding wing made from carbon composite materials. Design requirements were reviewed and composite wing sizing was conducted using design optimization with commercial software. Three composite manufacturing processes including hot-press, pultrusion, and autoclave were evaluated and the most suitable processes for the integrated wing fabrication were selected, with consideration given to performance and cost. The determined manufacturing process was verified by two design development tests for selecting the design concept. Stiffness and strength of the composite wing were estimated through structural analyses. The test loads were calculated and static tests about design limit load and design ultimate load were performed using both wings. As a result, the evaluation criterions of the tests were satisfied and structural safety was verified through the series of structural analyses and testing.