• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.773-781
• /
• 2004

Ceramic foams prepared from silica -clay were coated with TiO$_2$ and V$_2$O$_{5}$ catalysts for selective catalytic reduction of NOx with NH$_3$. The effects of V$_2$O$_{5}$ loading, reaction temperature, space velocity, and oxygen content on NOx reduction with NH$_3$ were mainly investigated. Also, the NOx reduction characteristics of V$_2$O$_{5}$ and V$_2$O$_{5}$ -TiO$_2$ filters were compared when sulfur dioxide exists. From the results, the optimal NOx reduction with the maximum reduction efficiency of 91 % could be performed under the condition with V$_2$O$_{5}$ loading 6.0 wt. %, reaction temperature 35$0^{\circ}C$, space velocity 6,000h$^{-1}$ , and oxygen content 5%. And, the V$_2$O$_{5}$ -TiO$_2$ filters have shown higher NOx reduction efficiency and acid resistance against sulfur dioxide than the V$_2$O$_{5}$ filters.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.1-7
• /
• 2005

In vehicle door system, weatherstrip seals protect passengers form noise, dust, rain and wind out of the vehicle. The higher efficient a weatherstrip is, the more durable it is in contact between the door and body frame. In this study, nonlinear finite element(FE) analysis is performed to obtain cauchy-stresses, displacements and reaction forces of the weatherstrip. Mechanical properties of the weatherstrip is obtained by uniaxial tension test. The MARC which is a commercial software for the nonlinear analysis of a flexible FE model is used. Twenty-one cases of the FE model are developed by using Ogden-foam formulation. In the results of nonlinear FE analysis, the most valuable deformation of the weatherstrip occurred when displacement control value reaches 7.2mm. Severe deformation is observed as the displacement control value become more increased. When the weatherstrip is designed, it would be considered that the displacement value of the weatherstrip has to be less than 7.2mm.

• 한국결정성장학회지
• /
• 제33권2호
• /
• pp.78-82
• /
• 2023

The oxygen evolution reaction (OER) is the primary challenge in renewable energy storage technologies, specifically electrochemical water splitting for hydrogen generation. We report effects of Mo doping into Ni layered double hydroxide (Ni-LDH) microcrystal on electrocatalytic activities. In this study, Mo doped Ni-LDH were grown on three-dimensional porous nicekl foam (NF) by a facile solvothermal method. Homogeneous LDH structure on the NF was clearly observed. However, the surface microstructure of the nickel foam began to be irregular and collapsed when Mo precursor is doped. Electrocatalytic OER properties were analyzed by Linear sweep voltammetry (LSV) and Electrochemical impedance spectroscopy (EIS). The amount of Mo doping used in the electrocatalytic reaction was found to play a crucial role in improving catalytic activity. The optimum Mo amount introduced into the Ni LDH was discussed with respect to their OER performance.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.452-457
• /
• 2005

실리카라이트 폼에 $0.2{\mu}m$ 정도의 가는 MFI 제올라이트 입자를 담지하여 만든 폼(foam) 촉매에서 n-옥탄의 분해반응을 조사하였으며, 생성물 분포에 Delplot 기법을 적용하여 반응기구를 고찰하였다. 담지된 MFI 제올라이트의 Si/Al 몰비는 25로 추정되며, 담지량은 실리카라이트 폼의 25 wt％이었다. 겉보기 밀도는 $0.11g{\cdot}cm^{-3}$로 낮아 촉매 충전량을 0.02 g에서부터 0.5 g까지 바꿀 수 있어서 압력손실 없이 반응물과 생성물의 체류시간을 폭 넓게 조절하였다. 촉매 충전량이 많아지면 n-옥탄의 전환율과 올레핀 수율이 높아졌다. 촉매를 조금 사용하였을 때 생성물 분포는 단순하여 양성자 분해기구로 설명할 수 있었다. 촉매 사용량이 많아지면 분해 생성물의 추가 반응이 진행되어 반응성이 낮은 올레핀과 파라핀의 함량이 많아지며 생성물 분포가 복잡해졌다.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.488-494
• /
• 2003

We have fabricated gelatin-immobilized polyurethane foams (PUFG) by dipping polyurethane foam (PUF) in an aqueous solution containing gelatin and by subsequent reaction with glutaraldehyde after freeze-drying. Gelatin aqueous solutions of different concentrations were used as the dipping solutions to control the amount of immobilized gelatin. The average pore size of PUF decreased with an increase in gelatin concentration. It was found from the hepatocyte adhesion experiment that the amount of hepatocytes seeded on PUFG1, prepared by using a 1% aqueous gelatin solution, was higher than that on other PUFGs. The hepatocytes inoculated in PUFG1, were slightly aggregated as the incubation time increased. The cells inoculated in PUFG1 showed higher ammonia removal ability than those monolayer-cultured on a gelatin-immobilized polystyrene dish (PSG) after 1 and 4 days of incubation time. The inoculated cells exhibited higher albumin secretion relative to monolayer-cultured hepatocytes on PSG. Albumin secretion by hepatocytes seeded on PUFG1 was increased by the presence of serum and was further increased by both the presence of serum and cytokines. The results obtained from a 3-(3,4-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay indicated that PUFG can provide a better microenvironment for hepatocyte culture along with nutrition and metabolite transfer through the high porosity of PUF.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.260-266
• /
• 2012

Syngas and hydrogen from the $CeO_2/ZrO_2$ coated foam devices were investigated under simulated solar radiation. The $CeO_2/ZrO_2$ coated SiC, Ni and Cu foam device were prepared using drop-coating method. Syngas production step was performed at $900^{\circ}C$, and hydrogen production process was performed for ten repeated cycles to compare the CeO2 conversion in syngas production step, $H_2$ yield in hydrogen production step and cycle reproducibility. The produced syngas had the $H_2$/CO ratio of 2, which was suitable for methanol synthesis or Fischer-Tropsch synthesis process. In addition, syngas and hydrogen production process is one of the promising chemical pathway for storage and transportation of solar heat by converting solar energy to chemical energy. After ten cycles of redox reaction, the $CeO_2/ZrO_2$ was analyzed using XRD pattern and SEM image in order to characterize the physical and chemical change of metal oxide at the high temperature.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.539-543
• /
• 2014

Foam type porous silicon carbide ceramics were fabricated by a polymer replica method using polyurethane foam, carbon black, phenol resin, and silicon powder as raw materials. The influence of the C/Si mole ratio of the ceramic slurry and heat treatment temperature on the porous silicon carbide microstructure was investigated. To characterize the microstructure of porous silicon carbide ceramics, BET, bulk density, X-ray Powder Diffraction (XRD), and Scanning Electron Microscope (SEM) analyses were employed. The results revealed that the surface area of the porous silicon carbide ceramics decreases with increased heat treatment temperature and carbon content at the $2^{nd}$ heat treatment stage. The addition of carbon to the ceramic slurry, which was composed of phenol resin and silicon powder, enhanced the direct carbonization reaction of silicon. This is ascribed to a consequent decrease of the wetting angles of carbon to silicon with increasing heat treatment temperature.

• Nano
• /
• 제13권11호
• /
• pp.1850136.1-1850136.12
• /
• 2018

Three-dimensional (3D) mixed phases NiSe nanoparticles growing on the nickel foam were synthesized via a simple one-step hydrothermal method. A series of experiments were carried out to control the morphology by adjusting the amount of selenium in the synthetic reaction. Meanwhile, the as-prepared novel column-acicular structure NiSe exist three advantages including ideal electrical conductivity, high specific capacity and high cycling stability. It delivered a high capacitance of $10.8F\;cm^{-2}$ at a current density- of $5mA\;cm^{-2}$. An electrochemical capacitor device operating at 1.6 V was then constructed using NiSe/NF and activated carbon (AC) as positive and negative electrodes. Moreover, the device showed high energy density of $31W\;h\;kg^{-1}$ at a power density of $0.81kW\;kg^{-1}$, as well as good cycling stability (77% retention after 1500 cycles).

• 공업화학
• /
• 제22권5호
• /
• pp.540-544
• /
• 2011

Diphosphoric acid와 1,4-butanediol을 이용하여 tetramethylene bis(orthophosphate)를 합성한 후 이를 urea와 반응시켜 새로운 인계난연제인 tetramethylene bis(orthophosphoryl urea) (TBPU)를 합성하였다. FT-IR을 이용하여 합성된 TBPU의 구조를 확인하였으며, TBPU를 폴리우레탄 폼에 첨가하여 기계적 물성과 열적성질, 난연성능 변화를 측정하였다. TBPU의 함량증가에 따른 폴리우레탄 폼의 기계적 물성 저하는 없음을 확인하였고, 난연제의 함량이 증가함에 따라 난연성능은 증가하였으며, 감압후의 난연성능 측정에서도 난연성능이 유지됨을 확인하였다. TGA를 통한 열적거동실험에서 TBPU가 첨가된 폴리우레탄 폼은 TBPU가 첨가되지 않은 폴리우레탄 폼에 비해 내열성이 향상됨을 확인 할 수 있었다.

• Composites Research
• /
• 제28권4호
• /
• pp.191-196
• /
• 2015

본 연구에서는 접착제로 체결된 구조물의 접착 조인트에서의 파괴인성을 조사하기 위하여 알루미늄 폼으로 제작한 Mode III 형 DCB 시험편들에 대하여 정적 해석 및 실험을 수행하였다. 정적 해석에서의 경우, 각 시험편 모델들은 강제 변위가 약 5 mm 진행되었을 때 최대 반력을 보였으며, 이 때 각 시험편 모델들의 최대 반력은 두께가 35 mm인 모델이 약 0.25 kN, 두께가 45 mm인 모델이 약 0.28 kN, 두께가 55 mm인 모델이 약 0.5 kN으로 나타났다. 이 해석 결과들을 입증하기 위하여 정적 실험의 경우에서 두 개의 시험편들을 택하였다. 정적 실험에서의 경우, 각 시험편들은 강제 변위가 약 5~6 mm 진행되었을 때 최대 반력을 보였으며, 각 시험편들의 최대 반력은 두께가 35 mm인 시험편이 약 0.22 kN, 두께가 45 mm인 시험편이 약 0.3 kN으로 나타났다. 도출된 결과값들을 비교하였을 때 해석과 실험의 데이터들 간에 큰 차이가 없음을 알 수 있었고, 따라서 별도의 실험과정 없이 해석을 통해서도 그 연구 데이터들을 확보할 수 있을 것으로 판단되며, Mode III 형 DCB 접합구조물에서의 기계적 특성들을 체계적으로 분석할 수 있을 것으로 사료된다.