• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.5
• /
• pp.519-524
• /
• 1992

purified rapeseed(Brassica napus var. Youngsan) protein was hydrolyzed by pronase. The hyrolysate protein was investigated for the some physicochemical and functional properties. UV and intrinsic fluorescence spectra of the hydrolysate showed the maximum absorption at 274nm and 360nm respectively. Intensity of yellow color decreased in the process of hydrolysis and the surface hydrophobicity decreased up to fourfold. The main bands of hydrolysate by sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) were observed at 14,000 to 12,000 dalton molecular weight. Solubilities of hydrolyzed protein increased by 10~15% compared to those of unhydrolyzed protein at acidic pH. In the hydrolysate, while absorption of both water and oil, foam expansion and emulsion stability were increased, absolute viscosity, heat coagulation, calcium coagulation, foam stability and emulsion activity were decreased.

• Composites Research
• /
• v.16 no.3
• /
• pp.18-24
• /
• 2003

Sandwich structures have been widely used in the applications of vessel industry, where high structural stiffness is required with small addition of weight. It is so significant to think of the effect of the variables in the design process of the sandwich structure for the concentrated loads. This paper describes the influence of design variables, such as core density, core thickness and face thickness ratio, on the strength of sandwich beam. The theoretical failure loads based on the 2-D elasticity theory agree well with the experimental yield or failure loads, which are measured at the three point bending laboratory test using AS4/3501-6 facing and polyurethane foam core sandwich beam. The comparison of those yield or failure loads was also done with the ratio of the top to bottom face thickness. The theoretical optimum condition is obtained by finding the intersection point of failure modes involved, which gives optimum core density of the sandwich beam for strength and stiffness. In the addition, the effect of unequal face thickness for the optimized and off-optimized sandwich beams for the strength was compared with the ratio of loading length to beam length, and the variations of strength and stiffness were discussed with the relative ratio of core to face mass.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.539-546
• /
• 2017

In this study, an outstanding anion exchange chemical filter was prepared for acidic gas removal. Commercial anion exchange resin was attached to polyurethane (PU) foam by using different types of pressure sensitive adhesive (PSA). The water and chemical resistance and also adhesive elongation were investigated. Also, the behavior of HCl and HF adsorption was evaluated as functions of the initial concentration and flow rate. ATE-701, AT-4000C and HCA-1000 showed 900, 1,500% and 2,400% of the elongation, respectively. It was confirmed that the desorption ratio of HCA-1000 was less than 6% and had excellent durability in water and chemical resistance tests. The adsorption occurred faster as the concentration and flow rate of HCl and HF increased. But 100% adsorption equilibrium occurred after 110 minutes, regardless of the concentration and flow rate. In addition, SEM morphology showed that the adhesive was uniformly dispersed, while the porous structure of the ion exchange resin was maintained, and the chemical filter exhibited excellent durability for the adsorption/desorption process.

• Macromolecular Research
• /
• v.15 no.7
• /
• pp.676-681
• /
• 2007

A process designed to synthesize rigid polyurethane foam (PUF) with insulative properties via the modulation of PUF cell size via the addition of clay and the application of ultrasound was assessed. The blowing agents utilized in this study include water, cyclopentane, and HFC-365mfc, all of which are known to be environmentally-friendly blowing agents. The rigid PUFs were prepared from polymeric 4,4'-diphenylmethane diisocyanate (PMDI) and polyether polyol with a density of $50kg/m^3$. In addition, rigid PUFs/clay nanocomposites were synthesized with clay modified by PMDI with and without the application of ultrasound. The PUF generated using water as a blowing agent evidenced the highest tensile strength. The tensile strength of the PUF/nanocomposites was higher than that of the neat PUF and the strength was even higher with the application of ultrasound. The cell size of the PUF/clay nanocomposites was less than that of the neat PUF, regardless of the type of blowing agent utilized. It appears that the higher tensile strength and lower cell size of the PUF/clay nanocomposites may be attributable to the uniform dispersion of the clay via ultrasonic agitation. The thermal conductivity of the PUF/clay nanocomposites generated with HCFC-141b evidenced the lowest value when PUF/clay nanocomposites were compared with other blowing agents, including HFC-365mfc, cyclopentane, and water. Ultrasound has also proven effective with regard to the reduction of the thermal conductivity of the PUF/clay nanocomposites with any of the blowing agents employed in this study. It has also been suggested that the uniformly dispersed clay particles in the PUF matrix function as diffusion barriers, which prevent the amelioration of the thermal insulation property.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.685-693
• /
• 2013

The foams of a poly(lactic acid) modified by the reactive compounding were produced with the batch foaming technique using supercritical $CO_2(scCO_2)$. Experiments were performed at $105{\sim}135^{\circ}C$ and 12~24 MPa. The blowing ratio and foam structure were significantly affected by changing the temperature and pressure conditions in the foaming process. The blowing ratio first increased with increasing foaming temperature and saturation pressure, reached a maximum and then decreased with a further increase in the foaming temperature and saturation pressure. Decreasing the rate of depressurization permitted a longer period of cell growth and therefore larger microcellular structures were obtained.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.34-40
• /
• 2012

The foaming of poly(butylene succinate) (PBS) using supercritical $CO_2(scCO_2)$ was studied. In order to improve the melt strength, PBS was modified using the reactive compounding technique. Rapid decompression of $scCO_2$-saturated PBS at a temperature above the depressed $T_m$ yielded expanded microcellular foams. The resulting foam structure could be controlled by manipulating process conditions. Experiments varying the foaming temperature while holding other variables constant showed that higher temperatures produced larger cells and reduced cell densities. Higher saturated pressures led to higher nucleation densities and smaller cell sizes. Decreasing the rate of depressurization permitted a longer period of cell growth and therefore larger cells were obtained.

• Convergence Security Journal
• /
• v.18 no.1
• /
• pp.33-42
• /
• 2018

CFD analysis is an analytical technique that applies a computer to the design and development of products across the entire industry for heat or fluid flow. This technology is used to shorten the development period and reduce costs through computerized simulation. However, the software used for CFD analysis is now required to use expensive foreign software. The Opensource CFD analysis software used in the proposed system has reliability of commercial CFD analysis software and has various user groups. However, for users who have expert knowledge, Opensource CFD software which supports only text interface environment, We have developed an environment that enables the construction of a CFD analysis environment for beginners as well as professionals. In addition, the proposed system supports the pre-processing (design and meshing) environment for CFD analysis and the environment for post-processing (result analysis & visualization), enabling the integrated CFD analysis process in one platform.

• The Korea Journal of Herbology
• /
• v.38 no.2
• /
• pp.35-41
• /
• 2023

Objectives : Washing face is the first step in skin beauty and health. I wanted to study the cleansing effect by using Placenta cp (cold process) soap. The skin condition is greatly influenced by the external environment such as lifestyle, drinking, smoking, and stress etc. I tried to measure the skin change state without environmental factors. Methods : In order to examine the effect before and after washing face under the same conditions, the same water and towel were used in the same place. The skin test was performed before and 10 minutes after washing. As a control group, a case of washing with water and foam cleanser. I compared and analyzed three cases: water washing, F/C (foam cleanser) washing, and Placenta cp soap washing. Results : In the case of water washing, it was significantly reduced in pores and increased in facial temperature. In the case of F/C washing, the facial temperature was significantly increased, but the decrease in moisture. In the case of washing with Placenta cp soap, significant reductions in T-zone and U-zone oil content, reduction in pore size, and increase in facial skin temperature were observed. Conclusion : In the case of Placenta cp soap, it is thought to be suitable for oily skin type, because of significant decrease in T-zone and U-zone oil content. It is thought to have the effect of increasing blood circulation in the facial skin and to reduce pores for oily skin types.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.409-422
• /
• 2019

In this study, we carried out the 3D numerical simulation to investigate the hydraulic characteristics of Synchronous Edge wave known as the driving mechanism of beach cusp using the Tool Box called the ihFoam that has its roots on the OpenFoam. As a wave driver, RANS (Reynolds Averaged Navier-Stokes equation) and mass conservation equation are used. In doing so, we materialized short-crested waves known as the prerequisite for the formation of Synchronous Edge waves by generating two obliquely colliding Cnoidal waves. Numerical results show that as can be expected, flow velocity along the cross section where waves are focused are simulated to be much faster than the one along the cross section where waves are diverged. It is also shown that along the cross section where waves are focused, up-rush is moving much faster than its associated back-wash, but a duration period of up-rush is shortened, which complies the typical characteristics of nonlinear waves. On the other hand, due to the water-merging effect triggered by the redirected flow toward wave-diverging area at the pinacle of run-up, along the cross section where waves are diverged, offshore-ward velocity is larger than shore-ward velocity at the vicinity of shore-line, while at the very middle of shoaling process, the asymmetry of flow velocity leaned toward the shore is noticeably weakened. Considering that these flow characteristics can be found without exception in Synchronous Edge waves, the numerical simulation can be regarded to be successfully implemented. In doing so, new insight about how the boundary layer streaming occur are also developed.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.275-281
• /
• 2009

Porous materials were manufactured by hydrothermal treatment of waste bottle glass without foam agent. Factorial design was applied to analyze data by statistical methods and deal with the important factors for a process. The largest effect for porosity was for temperature of hydrothermal treatment. Amount of water and temperature-water interaction appeared to have little effect. The particle size of raw material was also identified as a major factor by one-way ANOVA and the porosity decreased as the size increased. The sintering temperature was not statistically significant for the porosity but was significant for the pore size. The porous material had compressive strength and thermal conductivity comparing with those of ALC (autoclaved lightweight concrete), although it has higher porosity than for ALC.