• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.63-73
• /
• 2009

Recently, the use of lightweight panels in building structures has been increasing. Of the various lightweight panel types, styrofoam sandwich panels are inexpensive and are excellent in terms of their insulation capacity and their constructability. However, sandwich panels that include organic material are quite vulnerable to fire, and thus can numerous casualties in the event of a fire due to the lack of time to vacate and their emission of poisonous gas. On the other hand, lightweight foamed concrete is excellent, both in terms of its insulation ability and its fire resistance, due to its Inner pores. The properties of lightweight concrete is influenced by foaming agent type. Accordingly, this study investigates the insulation properties by foaming agent type, to evaluate the possibility of using light-weight foamed concrete instead of styrene foam. Our research found thatnon-heating zone temperature of lightweight foamed concrete using AP (Aluminum Powder) and FP (animal protein foaming agent) are lower than that of light-weight foamed concrete using AES (alkyl ether lactic acid ester). Lightweight foamed concrete using AES and FP satisfied fire performance requirements of two hours at a foam ratio 50, 100. Lightweight foamed concrete using AP satisfied fire performance requirements of two hours at AP ratio 0.1, 0.15. The insulation properties were better in closed pore foamed concrete by made AP, FP than with open pore foamed concrete made using AES.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.286-304
• /
• 2017

In this study, we proposed a new-type of circular perforated caisson breakwater consisting of a bundle of latticed blocks that can be applied to a small port such as a fishing port, and numerically investigated the hydraulic characteristics of the breakwater. The numerical method used in this study is OLAFOAM which newly added wave generation module, porous media analysis module and reflected wave control module based on OpenFOAM that is open source CFD software published under the GPL license. To investigate the applicability of OLAFOAM, the variations of wave pressure acting on the three-dimensional slit caisson were compared to the previous experimental results under the regular wave conditions, and then the performance for irregular waves was examined from the reproducibility of the target irregular waves and frequency spectrum analysis. As a result, a series of numerical simulations for the new-type of circular perforated caisson breakwaters, which is similar to slit caisson breakwater, was carried out under the irregular wave actions. The hydraulic characteristics of the breakwater such as wave overtopping, reflection, and wave pressure distribution were carefully investigated respect to the significant wave height and period, the wave chamber width, and the interconnectivity between them. The numerical results revealed that the wave pressure acting on the new-type of circular perforated caisson breakwaters was considerably smaller than the result of the impermeable vertical wall computed by the Goda equation. Also, the reflection of the new-type caisson breakwater was similar to the variation range of the reflection coefficient of the existing slit caisson breakwater.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.108-114
• /
• 2002

Cellular glass foam (CGE), the reprocessed glass, has a possibility as a component of vegetative propagation media of floricultural crops due to the its excellent air and water permeability, similar to that of perlite. An experiment was conducted to evaluate the rooting and growth thereafter of Kalanchoe blossfeldiana ‘Gold Strike’in media containing various volume ratios of granular rockwool, peat-moss, CGF and perlite. The particle size of CGF and perlite was 2.0~4.0mm and 1.2~4.0mm, respectively. Cuttings were rooted in a fog tunnel with a mean temperature of 18.2$^{\circ}C$ and RH of 66.7％ under a long day regime (14 h per day light period). Height, length of the longest root, stem diameter, no. of leaves, leaf area, percentage of rooted cuttings, shoot and root fresh weights, shoot and root dry weights, total chlorophyll concentration and physicochemical properties were measured. Cuttings rooted 100% in all treatments. Physicochemical properties in CGF and perlite-containing media showed little differences. The growth of rooted plants in the CGF-containing media was similar or rather superior to that in perlite-containing media. Consequently, CGF has a possibility as a vegetative propagation medium of Kalanchoe. To make wider commercial use of CGF, more demonstrative experiments and analyses are necessary.

• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.239-243
• /
• 2006

This research compared growth and flowering of potted $Viola{\times}wittrockiana$ 'Majestic GT Scarlet Shadow' in various mixtures of recycled perlite and cellular glass foam (CGF). The crop was cultured in a mat subirrigation system. Numbers of leaves, opened flowers, flower buds, and branches, fresh and dry weights of shoot, leaf area, and total chlorophyll concentration were the greatest in plants grown in the medium of used perlite + granular rockwool+ peatmoss (25:50:25, v/v/v). Plant height and length of the longest root were the highest and longest, respectively, in plants grown in the medium of CGF+peatmoss (25:75, v/v). The medium of CGF+peatmoss (25:75, v/v) was better than the medium of used perlite+peatmoss (25:75, v/v) in plant growth. The medium of CGF + granular rockwool (25:75, v/v) was poorer than the medium of recycled perlite + granular rockwool (25:75, v/v).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.139-152
• /
• 2006

A spent fuel storage cask is required to prove the safety of a canister under a hypothetical accidental drop condition. A hypothetical accidental drop condition means that a canister is assumed to be a lee drop on to a pad of the storage cask during loading it into a storage cask. A pad of the storage cask absorbs shock to maintain the structural integrities of a canister under a hypothetical accidental drop condition. In this paper a finite element analysis for various pad structures was carried out to improve the structural integrity of a canister under a hypothetical accidental drop condition. A pad of a storage cask was designed a steel structure with concrete. The 1/4 height of a pad was modified with a structure composed of a steel and a polyurethane foam as a impact limiter. The effect of a shape of a steel structure was studied. The effects of the thickness of a steel structure and the density of a polyurethane foam was also studied.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.307-313
• /
• 2010

In this study, alternative designs for the bends used in district heating pipes are investigated. The district heating pipes, which are subjected to temperatures of 10 to $120^{\circ}C$ and a water pressure of $16\;kgf/cm^2$, have to withstand thermomechanical cyclic loads when in use. These pipes comprise three concentric tubes: a steel pipe (internal), polyurethane (PUR) insulator (middle), and a high-density polyethylene (HDPE) case (external). In addition, the bends in the district heating pipe system are covered with foam pads that cause aging. In this study, an alternative bend design that does not involve the use of a foam pad is proposed to overcome the aging problem in the bends. In the proposed design, "shear rings" are added to the surface of a bend, and its dimensions are determined by a combination of the statistical (Taguchi) method and FEM. The geometrical parameters such as thickness, height, and number of the rings significantly affect the design optimization, and hence, they affect the results of the FEM.

• Animal Bioscience
• /
• v.35 no.3
• /
• pp.385-398
• /
• 2022

Objective: The objective was to evaluate the influence of different dietary crude protein (CP) levels during the growth phase on reproductive characteristics and reproductive efficiency as well as the body development of adult male Japanese quail. Methods: Three hundred one-day-old male quails were distributed into five treatments with diets containing different CP levels (18%, 20%, 22%, 24%, and 26%) in a completely randomized design, with six replicates of ten birds each. The CP diets were applied only during the growth phase (1 to 35 days). At 36 days of age, the birds were transferred to 30 laying cages with three males and nine females each, and all birds received the same diet formulated to meet production-phase requirements until 96 days of age. Results: The growth rate of the birds increased linearly (p<0.01) with increasing dietary CP, but the age of maximum growth decreased (p<0.05). At growth maturity, all birds had the same body weight (p>0.05). At 35 days of age, higher weight gain was obtained (p<0.05) with diets containing 22% CP or higher. No effects on feed conversion were observed in this phase. The increase in dietary CP enhanced (p<0.01) nitrogen intake and nitrogen excretion but did not affect (p>0.05) nitrogen retention. Testis size, seminiferous tubular area, number of spermatogonia, and germinal epithelial height at 35 days of age increased linearly (p<0.05) with dietary CP, while the number of Leydig cells decreased (p<0.01). The Sertoli cell number at 60 days of age increased linearly (p<0.01) with dietary CP. Dietary CP levels did not affect cloacal gland size, foam weight, foam protein concentration, semen volume, or flock fertility at 90 days of age. Conclusion: Dietary CP concentration affected body and testicular development in male Japanese quails but did not affect reproductive efficiency.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.4
• /
• pp.612-625
• /
• 2018

This study designed 16 kinds of basic structure and 4 kinds of modified structure for impact protection pads with a spacer fabric shape. The pad is a structure in which hexagonal three-dimensional units, composed of a surface layer and a spacer layer, are interconnected. Designed pads were printed with flexible $NinjaFlex^{(R)}$ materials using a FDM 3D printer. The printed pads were evaluated for impact protection performance, compression properties and sensory properties. The evaluation of the impact protection performance indicated that basic structures better than CR foam material at 20cm height were DV1.5, DX1.5, DX1.0, DV1.0 and HV1.5. The evaluation of the compression properties for the five types, with good results in the impact protection performance, indicated that DV1.0, DX1.0, DV1.5, HV1.5 and DX1.5 showed good results, respectively. The sensory evaluation of DV1.0, DX1.0, and DV1.5, which with good results when considering both the impact protection performance and the compression performance, showed that DV1.0 were the best for surface, flexibility, compression and weight. Therefore, DV1.0 is shown to be the best structure for protection pads.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.781-787
• /
• 2004

In this paper, a novel dual and wide band aperture stacked patch antenna for Cellular/PCS/IMT-2000 base station is presented. It consists of single microstrip patch having notches along the radiating patch, two dielectric substrates and a form material. To achieve wide band characteristic, we utilize the coupling effect between the notched patch and the resonant aperture in the ground plane and by properly cutting notches on the patch, an aperture stacked patch antenna could be designed to yield dual frequency operation. By the proper choice of resonant aperture size and height of a foam material, dual and wide band characteristic could be realized the measured impedance bandwidth(1:1.5 VSWR) of designed antenna at lower band(860 MHz) reaches 77 MHz and covers the Cellular CDMA band(824∼894 MHz). The measured impedance bandwidth(1:1.5 VSMR) of the designed antenna at upper band(1,960 MHz) is about 550 MHz and covers both the PCS band(1,750∼l,870 MHz) and the for-2000 band(1,920∼2,170 MHz). Good broadside radiation with high gain(5.65∼7.4 dBi) characteristics have also been observed.

• Journal of Bio-Environment Control
• /
• v.13 no.2
• /
• pp.81-89
• /
• 2004

This study was conducted in a commercial plug glasshouse in Sacheon to examine the possibility of producing tomato plug seedlings using various growing media containing cellular glass foam (CGF)and carbonized chestnut woodchips (CCW) as medium components. Plug seedlings of 'Seogun' tomato were grown in media containing 50% CCW＋50% peatmoss, 33% CGF＋67% peatmoss, and 50% peatmoss＋50% granular rockwool. A commercial plug medium (Tosilee) was used as the control. All seeds were sown in 200 cell plug trays on November 28, 2001. Seedling growth was measured at 31 days after sowing. Each treatment showed a similar growth result as compared to the control. Plant height, root grade, fresh weight, and air space and bulk density of the medium were significantly greater in the 33% CGF＋67% peatmoss treatment than those in the other media. However, growth was slightly suppressed in the 50% CCW＋50% peatmoss. pH and EC of the media were the highest in the control treatment, although no toxicity symptoms had been observed. The results suggest that perlite can be replaced with a new material such as CGF in the commercial scale production of plug seedlings of 'Seogun' tomato.