• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3018-3025
• /
• 2000

It is possible to shorten developing process by making model using polyurethane foam in the area of automobile development process, etc. However, this skill is too difficult to be of practical use because machining is not easy due to characteristic of polyurethane foam. Domestic and foreign automobile company use clay, polyurethane foam. etc,, those are easy to handle and to make model after completing design sketch. But these materials is difficult to the machined and be worked by humans hand, There are so many difficult problem for machining by making model using polyurethane foam since cutting of elastic body like polyurethan foam has never been studied. Therefore, in this study, it is investigated to measured cutting force that is generated in case of polyurethane foam machining, and to make systematize tool compensation of polyurethane foam cutting work on automobile model by modification of tool offset method on existing steel.

• 생명과학회지
• /
• 제8권5호
• /
• pp.504-508
• /
• 1998

포말분리 장치를 이용한 해수 중의 단백질 제거 특성을 조사한 결과, 단백질 농도가 높을 수록 그리고 포말층높이가 낮을수록 단백질의 제거속도는 증가는 것으로 나타났다. 단백질의 농도에 따른 제거속도의 변화는 단백질의 농도가 높을수록 그 제거 속도 또한 증가하는 것으로 나타났으며, 본 논문의 폭기량 0.65 cm/sec로 운전한 실험 결과에서 단백질 농도와 제거속도와의 관계가 다음과 같이 나타났다. (equation omitted) 또한 포말층높이의 변화에 대해서도 포말층의 높이가 클수록 그 제거속도는 감소하는 것으로 나타났다. 이때에 폭기량이 많을수록 단백질의 제거속도 또한 크게 나타났으며, 포말층높이의 증가에 따른 제거속도의 감소 정도 또한 폭기량이 많을수록 크게 나타났다. 그러나 상대적인 수치에 따르면, 폭기량에 상관없이 포말층 높이가 10 cm증가함에 따라 낮은 포말층 높이에서의 제거속도의 대략 30 % 정도가 감소하는 것으로 나타나 상대적인 감소율의 비는 일정한 것으로 나타났다.

• 한국수산과학회지
• /
• 제37권6호
• /
• pp.498-504
• /
• 2004

Removal of waste generated by Paralichthys olivaceus in the seawater aquarium using a foam separator was investigated. Protein concentration without a foam separator continuously increased until 3 days after stocking and reached at 25 mg/L after 5 days stocking, but protein concentration became lower than the initial protein concentration (2.5 mg/L) with a foam separator. The trends of other fish wastes such as ammonia, total suspended solids (TSS) and chemical oxygen demand (COD) were similar to protein. Dissolved oxygen (DO) in the aquarium decreased below 6.0 mg/L without a foam separator, but with a foam separator the average DO in the aquarium was 7.3 mg/L. Foam separation with the increase of superficial air velocity (SAV) was more effective than that with the fixed SAV. This study showed that wastewater. treatment of seawater aquarium using a foam separator is effective method for a fish waste removal and oxygen supply.

• KSBB Journal
• /
• 제7권3호
• /
• pp.172-178
• /
• 1992

담체로 사용된 polyurethane foam은 Rizopus chinensis의 균사가 부착하여 안정하게 증식할 수 있게 하였다. 고정화를 위해 사용된 네 종류의 polyurethane foam중 GP-160이 고정하ㅗ 매체로 우수한 성질을 보였고, 입자의 크기는 7-8mm가 적당하였다. Rizopus chinensis의 현탁 배양과 polyurethane foam에서의 고정화 배양을 비교할 때, 전체 리파아제의 활성도는 큰 변화가 없었지만, 고정화 배양의 경우 extracellualar lipase의 생성을 억제하여 intracellular lipase의 활성도를 현탁 배양의 경우보다 약 2배가량 높일 수가 있었다. 고정화 세포의 열안정성을 조사하기 위하여 35~$50^{\circ}C$사이에서 열에의한 비활성화 에너지값을 구해본 결과, 그 값이 28.7kcal/mol로서 본 연구에서 제조된 고정화 세포의 생촉매가 배교적 좋은 열안정성을 갖고 있다.

• 한국수산과학회지
• /
• 제37권3호
• /
• pp.179-185
• /
• 2004

The characteristics of foam generation were assessed for freshwater and seawater using a foam generator. Both in freshwater and seawater, the height of the foam layer increased with initial protein concentrations. The height of the foam layer also increased with pore size of the air distributor. The optimum superficial air velocities (SAV) in freshwater and seawater were 0.84 cm/sec and 0.6 cm/sec, respectively. The height of the foam layer was the highest in pH 3 in freshwater and in the region of pH 5-7 in seawater. The height of the foam layer increased with $NaHCO_3$ concentration in freshwater, and $NaHCO_3$ concentration had little effect in seawater. Removal efficiencies of total suspended solid (TSS) and turbidity decreased with an increase of initial protein concentrations in a batch foam separator both in freshwater and seawater.

• 공업화학
• /
• 제25권2호
• /
• pp.198-203
• /
• 2014

본 연구에서는 Ni metal foam 플레이트의 수증기 개질반응 및 표면 특성을 조사하였다. 전처리를 통하여 Ni의 산화상태를 변화시킬 수 있었으며, 활성 site로서 표면에 노출된 metallic Ni 종은 수증기 개질 반응활성에 중요한 역할을 한다. 또한 Ni metal foam 플레이트의 기공제어 및 촉매 기능을 부여하기 위하여 Ni metal foam 플레이트와 Ni-YSZ 촉매를 혼합하여 다공성 촉매 분리막을 제조하였다. SEM 분석 결과 metal foam 플레이트의 기공을 제어할 수 있었으며, 표면에 Ni-YSZ 촉매는 고르게 잘 분포되어 있었다. Ni 기반 다공성 촉매 분리막은 공간속도에 상관없이 상용촉매와 유사한 수증기 개질 활성을 가진다.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.47-53
• /
• 2018

Sn-based lithium-ion batteries have low cost and high theoretical specific capacity. However, one of major problem is the capacity fading caused by volume expansion during lithiation/delithiation. In this study, 3-dimensional foam structure of Cu-Sn alloy is prepared by co-electrodeposition including large free space to accommodate the volume expansion of Sn. The Cu-Sn foam structure exhibits highly porous and numerous small grains. The result of EDX mapping and XPS spectrum analysis confirm that Cu-Sn foam consists of $SnO_2$ with a small quantity of CuO. The Cu-Sn foam structure electrode shows high reversible redox peaks in cyclic voltammograms. The galvanostatic cell cycling performances show that Cu-Sn foam electrode has high specific capacity of 687 mAh/g at a current rate of 50 mA/g. Through SEM observation after the charge/discharge processes, the morphology of Cu-Sn foam structure is mostly maintained despite large volume expansion during the repeated lithiation/delithiation reactions.

• 설비공학논문집
• /
• 제11권2호
• /
• pp.185-192
• /
• 1999

Effective thermal conductivities and pressure-drop-related properties of aluminum foam metals have been measured. The effects of porosity and cell size in the aluminum foam metal are investigated in detail. The porosity of the foam metal, considered in the present study, varies from 0.89 to 0.96 and the cell size from 0.65㎜ to 2.5㎜. The effective thermal conductivity is evaluated by comparing the temperature gradient of the foam metal with that of the thermal conductivity-known material. The pressure drop in the foam metal is measured by a highly precise electric manometer while air is flowing through the aluminum foam metal in the channel. The results obtained indicate that the effective thermal conductivities are found to be increased with a decrease in the porosity while the effective thermal conductivities ire little affected by the cell size at a fixed porosity. However, the pressure drop is strongly affected by the cell size as well as the porosity. It is seen that the pressure drop is increased as the cell size becomes smaller, as expected. The minimum pressure drop is obtained in the porosity 0.94 at a fixed cell size. A new correlation of the pressure drop is proposed based on the permeability and Ergun's coefficient for the aluminum foam metal.

• 한국기후변화학회지
• /
• 제9권4호
• /
• pp.399-406
• /
• 2018

The purpose of this study is to propose a methodology for estimating greenhouse gas emission reduction through HFCs used in the foam industry. This study investigated characteristics of HFCs and greenhouse gas emissions from production processes in the foam industry, which uses HFCs as a blowing agent. Also, we investigated fluorinated gas removal technology to determine a proper technology for the foam industry. And we confirmed the criteria and characteristics of External Project for methodology development. According to criteria of External Project and foam industrial process emission, a methodology for calculating the amount of greenhouse gas emission reduction in foam industry was developed. Lastly, we analyzed the amount of greenhouse gas emission reduction and KOC (Korea Of Offset) in the foam industry based on the domestic government's plan to reduce HCFCs and imported amount of HFCs used as a blowing agent. The results of this study demonstrate that linking greenhouse gas reduction in the foam industry and the domestic greenhouse gas reduction system can contribute to achieve the domestic greenhouse gas reduction goal.

• 원예과학기술지
• /
• 제30권1호
• /
• pp.34-41
• /
• 2012

본 연구는 새롭게 개발된 무기물인 phenolic foam 배지를 이용한 파프리카 파종용 플러그묘의 생산 가능성을 알아보기 위해 유리온실에서 수행하였다. Grodan 암면, UR 암면, phenolic foam LC, phenolic foam RC, phenolic foam 3813-4의 5종류 펠릿형 배지에 파프리카 'Fascinato'를 파종하였다. 종자는 식물생장상($25^{\circ}C$, 상대습도 90%, 암상태)에서 4-5일 동안 발아시켰고, 발아가 시작된 후에는 유리온실로 옮겨 두상관수로 양액을 관주하였다. 파프리카의 생육은 파종 20일 후에 측정하였다. 배지의 pH를 측정한 결과 Grodan 암면이 가장 높았고, EC는 phenolic foam 3813-4가 가장 높았지만 식물의 독성 증상은 관찰되지 않았다. 모든 배지에서 90% 이상의 발아율을 보였다. 초장, 경경, T/R률, 엽면적, 엽록소 함량은 암면 배지와 비교하였을 때 생육이 유사한 것으로 나타났다. 엽수, 최대근장, 지상부의 건물중은 유의적인 차이가 없었다. 전체적으로 phenolic foam 배지인 LC와 RC는 암면배지와 비교하여 유사한 생육을 보였다. 본 실험결과 파프리카 'Fascinato'의 상업적 규모의 육묘를 위해 암면을 신개발 물질인 페놀릭 폼으로의 대체 가능성을 확인하였다.