• 제목/요약/키워드: flux flow step

검색결과 46건 처리시간 0.018초

Smoldering 연소로 인한 화재사고 조사보고 소개 및 이론적 해석 (Investigation and Theoretical Analysis of a Fire Accident Caused by Smoldering Combustion)

  • 김연승;변영철;황정호
    • 한국화재소방학회논문지
    • /
    • 제13권3호
    • /
    • pp.3-17
    • /
    • 1999
  • 산호제의 양이 충분치 못한 밀폐된 공간에서는 화재가 발생하지 않으리라는 기대를 깨고, 다공성 물질내부에서 공극안에 있는 산화제를 이용하여 서서히 연소되는 smoldering 반응을 통하여 대형 화재가 발생할 수 있다. 본 논문에서는 하나의 실제 화재 사건을 화재 조사 방법에 의하여 기술한 보고서를 바탕으로 하여 smoldering 연소가 화재의 발생에 미치는 영향을 예시하였으며, 예시된 사고의 smoldering 연소를 강제대류에 의한 하향식 역방향 smoldering으로 모델링하였다. 화학반응으로는 열분해가 없는 1 단계 반응이 채택되어, 온도 및 산화제의 공간적 분포와 smoldering의 전파속도를 수치적으로 모사하였다. 수치결과로서 유입되는 산화제의 양과 연료의 공극률이 반응지역의 전파속도를 결정하는 가장 우세한 인자로 파악되었다. 그러므로 smoldering 에 의한 화재 발생시 유입되는 산화제의 양과 연료의 공극률과의 관계를 알고 있다면 주어진 연료의 공극률에 대하여 유입되는 산화제의 양을 제어함으로써 불길로의 천이를 억제할 수 있음을 제시하고 있다.

  • PDF

낮은 경사각을 갖는 밀폐형 2상 열사이폰의 열전달 특성에 관한 연구 (A Study on Heat Transfer Characteristics of a Closed Two-Phase Thermosyphon with a Low Tilt Angle)

  • 김철주;강환국;김윤철
    • 설비공학논문집
    • /
    • 제8권1호
    • /
    • pp.1-12
    • /
    • 1996
  • In lots of application to heat exchanger systems, closed two-phase thermosyphons are tilted from a horizontal. If the tilt angle, especially, is less than 30$^{\circ}$, the operational performances of thermosyphon are highly dependent on tilt angle. The present study was conducted to better understand such operational behaviors as mech-anni는 of phase change, and flow patterns inside a tilted thermosyphon. For experiment, an ethanol thermosyphon with a 35% of fill charge rate was designed and manufactured, using a copper tube with a diameter 19mm and a length 1500mm. Through a series of test, the tilt angle was kept constant at each of 4 different values in the range 10~25deg. and the heat supply to the evaporator was stepwisely increased up to 30㎾/$m^2$. When a steady state was established to the thermosyphon for each step of thermal loads, the wall temperature distribution and vapor temperature at the condenser were measured. The wall temperature distributions demonstrated a formation of dry patch in the top end zone of the evaporator, with a values of temperature 20~4$0^{\circ}C$ higher than the wetted surface for a moderate heat flux q≒20㎾/$m^2$. Inspite of the presence of hot dry patch, however, the mean values of boiling heat transfer coefficient at the evaporator wall were still in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times higher than the predicted values obtained from Nusselt's film condensation theory on tilted plate. Using those two expressions, a correlation was formulated as a function of heat flux and tilt angle, to determine the total thermal resistance of a tilted thermosyphon. The correlation formula showed a good agreement with the experimental data within 20%.

  • PDF

지하다공질(地下多孔質) 매체(媒體)속에서의 오염물질이동(汚染物質移動) 해석(解析)을 위한 지하수(地下水)흐름 모형(模型) (Groundwater Flow Model for the Pollutant Transport in Subsurface Porous Media Theory and Modeling)

  • 조원철
    • 대한토목학회논문집
    • /
    • 제9권3호
    • /
    • pp.97-106
    • /
    • 1989
  • 본(本) 연구(硏究)는 유한요소법(有限要素法)(FEM)을 이용(利用)하여 2차원(次元) 지하수(地下水) 흐름모형(模型)을 확립(確立)한 것으로 지하수계(地下水界)에서의 오염물질이동(汚染物質移動)에 관한 종합적(綜合的)인 동적(動的)시스템 모형(模型)을 개발(開發)하는 연구(硏究)의 첫 단계(段階)이다. 이 흐름모형(模型)은 보다 많은 실재문제(實在問題)를 다를 수 있는 융통성(融通性)과 유연성(柔軟性)을 가지도록 하고 있다. 시간(時間)의 함수(函數)로 나타나는 Sources/Sinks, Dirichlet 형(形)의 경계조건(境界條件), Neumann 형(形) 혹은 Cauchy 형(形)의 유동(流動) 경계조건(境界條件), 누수성피압상(漏水性被壓床) (leaky confining beds) 등(等)의 조건(條件)을 가진 지하수(地下水)흐름을 모의발생(模擬發生 수 있으며, 또 복잡(複雜)한 경계조건(境界條件)을 잘 나타내기 위하여 삼각형요소(三角形要素)와 사각형요소(四角形要素)를 혼합(混合)하여 쓸 수 있는 지하수(地下水)흐름 FEM 모형(模型)을 확립(確立)한 것이다.

  • PDF

갑자기 출발하는 가열된 원통 주위의 비정상 충류경계층 유동에 관한 수치적 연구 (Unsteady laminar boundary layer over a heated circular cylinder started impulsively from rest)

  • 김재수;장근식
    • 대한기계학회논문집
    • /
    • 제11권2호
    • /
    • pp.262-270
    • /
    • 1987
  • 본 논문에서는 Eulerian 좌표축에서 온도 경계층과 혼합된 비정상 경계층 유 동을 효과적으로 다룰 수 있는 좌표변환 방법과 수치해석 방법을 도입하였다. 이전 의 수치적 방법들은 축차적이며, 뒷정체점 부근의 경계층 두께가 시간과 더불어 지수 적으로 증가하므로, 격자점의 수를 경계층 두께의 증가에 따라 상당히 늘려 주어야 된 다. 그러나 여기에서는, 격자점의 수를 무리하게 늘릴 필요가 없으며 일반적인 비선 형 차분방정식을 정확도를 떨어뜨리지 않고 선형화시킴으로써 비축차적인 수치해들이 허용된다. 이런 선형화 방법은 Beam & Warming에 의해 최초로 압축성 Navier-Stokes 방정식에 사용되었고, Orlandi & Ferziger, Kim & Chang에 의해 경계층 유동에 확장되 었다.또한 뒷정체점 부근에서 경계층 두께의 증가로 인한, 격자점 증가의 필요를 피하기 위하여, 몇 가지 서로 다른 종류의 변환변수들을 시간과 공간에 따라 선별적으 로 사용하여 수치적인 경계층 두께가 거의 일정하도록 만들었다. 이와 같은 변환변 수들은 또한 쌍-포물선형인 현 지배방정식의 초기조건들을 쉽게 구할 수 있도록 허용 해 준다.

유조선, COT Vent Pipe용 Anti-Splash Device 최적 모델 개발 (Oil Carrier, Development of on Optimized Anti-Splash Device Model for COT Vent Pipe)

  • 나옥균;전영수;박신길;김종호
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2015년도 특별논문집
    • /
    • pp.50-55
    • /
    • 2015
  • Application of newly conceptualized Anti-Splash Devices designed for COT vent pipes were studied on a P/V valve located on the upper deck of an oil carrier vessel. Anti-Splash devices are used in the shipbuilding industry in order to avoid oil overflow and spray accidents caused by excess pressure and vacuum condition in the cargo oil tanks. These conditions are caused by the transverse and longitudinal sloshing forces that arise from ship motion during sea voyages. The main issue with existing Anti-Splash device model is flux at the outlet of the Anti-Splash Device, and so, new conceptual models for the Anti-Splash device were developed and compared to existing Anti-Splash device model using CFD analysis. Transient analysis was used to capture the flow and velocity of each model and a comparative analysis was performed between old and new-concept models. This data was used to determine the optimal design parameters in order to develop an optimized Anti-Splash Device. A Factory acceptance test was performed on the new-concept models in order to verify the performance and efficiency against their design requirements and other criterion. The final step performed was to apply the optimized Anti-Splash Device models for COT vent pipes to an actual vessel and verify performance through a seawater cargo operation during a sea voyage as per the ship owner's request. The patent for the aforementioned device was obtained by the Korean Intellectual property Office dated Dec. 18th,2014.

  • PDF

미국 네브라스카의 관개된 옥수수 농업생태계의 복사, 에너지 및 엔트로피의 교환 (Radiation, Energy, and Entropy Exchange in an Irrigated-Maize Agroecosystem in Nebraska, USA)

  • 양현영;요하나 마리아 인드라와티;앤드류 수커;이지혜;이경도;김준
    • 한국농림기상학회지
    • /
    • 제22권1호
    • /
    • pp.26-46
    • /
    • 2020
  • 이 연구의 목표는 관개된 옥수수 밭에서의 복사, 에너지 및 엔트로피의 교환을 평가하고 문서화하는 것이다. 열역학적 관점에서, 우리는 이 농업생태계를 태양 복사로 인해 시스템 내부와 외부 사이에 큰 경도(gradient)가 부여되는 열린 열역학적 시스템으로 간주하였다. 따라서 시스템이 평형에서 멀어질 때, 열역학적 원칙에 따라 비평형 소산 과정(nonequilibrium dissipative process)인 이 생태-사회시스템이 모든 생물, 물리, 화학 및 인위적 구성 요소를 사용하여 태양으로부터 주어진 경도에 저항하여 이를 감소시키도록 움직인다고 가정하였다. 이 가설을 검증하기 위한 첫 단계로서 미국 네브라스카의 옥수수 밭에 위치한 AmeriFlux의 NE1 사이트에서 2003년부터 2014년까지 관측된 플럭스 및 미기상 자료를 사용하여 복사, 에너지 및 엔트로피의 교환을 정량화하였다. 12년 평균한 생장기간의 결과에 따르면, 시스템의 에너지 포획(순복사와 하향단파복사의 비, Rn/Rs↓)은 옥수수의 생장과 함께 증가하였고, 생장기간이 비생장기간보다 약 80% 높았다. 생장기간 동안 시스템 내의 엔트로피 생성(σ)은 평균 9.56 MJ m-2 K-1이었고, 주로 하향단파 복사에 의해 결정되었다. 엔트로피 수송(J)은 잠열플럭스, 순장파복사, 현열플럭스의 순으로 기여하였고, 시스템 외부 환경으로 퍼낸 양은 σ의 ~84%에 해당하는 -7.99 MJ m-2 K-1이었다. 따라서 매년 생장 기간동안 시스템 내에 순 축적된 엔트로피(dS/dt)는 1.57 MJ m-2 K-1이었다. 탄소 흡수 효율(CUE)은 1.25~1.62, 물 사용 효율(WUE)은 1.98~2.92 g C (kg H2O)-1이었고 모두 옥수수의 성장과 함께 증가하였다. 극심한 가뭄으로 관개가 더 빈번하게 행해진 2012년의 경우, σ와 J가 모두 평년보다 10% 많은 최대값을 보였고, 그 결과 서로 대부분 상쇄되어 dS/dt는 평년보다 조금 높은 수준에 머물렀다. 가뭄 중에도 빈번한 관개로 인해 엔트로피 수송의 주된 경로가 현열플럭스에서 잠열플럭스로 바뀌면서 생산량과 CUE는 평년 값을 웃돌았으나 물과 빛의 사용 효율은 오히려 낮아졌다. 이러한 결과에 근거하여 관개된 옥수수 생태-사회시스템의 지속가능성의 변화를 평가하기에는 아직 여러가지 문제가 남아있다. 자기-조직화 과정은 시스템과 주변 간의 경도를 효과적으로 감소시키는 역할을 한다. 따라서 엔트로피 자료와 함께, 지속가능성의 척도가 되는 자기-조직화 역량을 나타내는 스펙트랄 엔트로피, 또는 하부시스템의 구조 및 에너지·물질의 흐름의 강도와 방향의 변화를 가늠할 수 있는 역학적 과정망(dynamic process network) 분석 등의 추가 연구가 병행되어야 한다.