• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.539-545
• /
• 2009

A feasibility of a pilot scale two-phase anaerobic digestion with ultra filtration system treating garbage leachate were evaluated. The treatment system consisted of a thermophilic acidogenic reactor, a mesophilic methanogenic reactor, and an UF membrane. The average COD removal efficiency of the treatment system was 95% up to the OLR of 3.1 g COD/L/d. The higher COD removal efficiency with membrane unit resulted from the removal of some portion of soluble organics by membrane as well as particulate materials. When the membrane unit was in operation, bulk liquid in acidogenic and methanogenic reactors was partially interchanged, which maintained the acidogenic reactor pH over 5.0 without external chemical addition. Also, with the production of methane in the acidogenic reactor, the organic loading rate of the methanogenic reactor reduced. The initial flux of the membrane unit was $50{\sim}60L/m^2/hr$, but decreased to $5 L/m^2/hr$ after 95 days of operation due to clogging caused by particulate materials such as fibrous materials in garbage leachate. To prevent clogging caused by particulate materials, a pretreatment system such as screening is required. With the improvement with membrane unit operation, the two-phase anaerobic digestion with ultra filtration system is expected to have the possibility of treating garbage leachate.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.57.2-57.2
• /
• 2014

Red active galactic nuclei (AGNs) are supposed to be transitional objects becoming normal AGNs in the galaxy evolution scenario. So far, ~200 red AGNs have been found by very red color in optical through NIR wavelength (e.g., r'-K >5 and J-K>1.3; Urrutia et al. 2009). Here, we compare nuclear activities of the red AGNs to those of normal AGNs to verify the evolutionary phase of the red AGNs. In order to study the nuclear activities of the red AGNs, we use broad emission lines of $P{\beta}$ ($1.28{\mu}m$) of which flux is less suppressed by a factor of 100 than the $H{\beta}$ line in the case of the red AGNs with a color excess of E(B-V)=2 mag. We use 16 red AGNs discovered in previous red AGN surveys by using SDSS, 2MASS, and FIRST (Glikman et al. 2007; Urrutia et al. 2009) at z ~0.7 for which $P{\beta}$ lines are redshifted to the sky window at ${\sim}2.2{\mu}m$. The mean Eddington ratio of the 16 red AGNs is 0.562, and that of the normal AGNs is 0.320, which indicates the red AGNs include more active black hole (BH) than the normal AGNs. To test how significantly the nuclear activities of the red AGNs and the normal AGNs are different, we perform a two-dimensional Kolmogorov-Smirnov test (K-S test) on their Eddington ratio distributions. The K-S test shows the maximum deviation between the cumulative distributions, D, is 0.48, and the probability of null hypothesis, p, is even less than 0.001. This result is consistent with a picture of that the red AGNs are in intermediate phase between the stage of merger-driven starburst galaxy and the normal AGN.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.269-272
• /
• 2006

The heat and smoke which generated by subway under fire is one of the most harmful factor in air tighten underground station. To prevent this, Trackway Exhaust System(TES) can be used. The heat released from the train running in the tunnel raises the temperature at the platform and the trackway, and thus proper ventilation system is required for comfortable underground environment. When the fire is occurred, TES is operated as smoke exhaust mode from normal ventilation mode. In the present study, the subway station which is one of the line number 9 in Seoul subway is modeled, and fired situation is simulated with several ventilation mode of ventilation system in trackway. For this simulation whole station is modeled. Non steady state 3D simulation which considered train under fire is entering to the station is performed. Temperature and smoke distribution in platform and trackway are compared. To represent heat by fire, heat flux was given to the fired carriage, also to describe smoke by fire, concentration of CO is represented. As the result of present study, temperature and smoke distribution is different as the method of ventilation in trackway and platform is changed. In over side of trackway, the fan must be operated as exhaust mode for efficient elimination of heat and smoke, and supply mode of fan operation in under side shows better distribution of heat and smoke. The ventilation system which is changed from ventilation mode to exhaust mode can be applied to control heat and smoke under fire.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.127-138
• /
• 1994

In the process of pervaporation separation for aqueous ethanol solution through cellulose tai-acetate(CTA) membrane, the modelling on the solution-diffusion permeation mechanism was built up on the basis of sorption and permeation experimental results. Also its function type and parameter were examined. The composition of sorption equilibrium in three component system(Ethanol/Water/CTA) were compared with the calculated value by Flory-Huggins' equation using the pure component sorption data. In order to apply the thermodynamic equilibrium relationship between the membrane free composition in the membrane and the equilibrium composition in the liquid phase, the apparent activity this system, however, the results were not satisfied. Diffusion equations were expressed with the concentration gradient considering permeate alone, and a concentration-dependent diffusion coefficient which includes a parameter was used. And this model was fitted with the measured permeation rates. If the permeation rate and the amount of sorption of one component were much larger than those of the other, the bulk flow term could not be negligible. The flux and selectivity were increased with increasing temperature, and with decreasing downstream pressure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1555-1569
• /
• 2000

Numerical simulation of fluid flow with moving free surface has been carried out. For the free surface flow, a VOF(Volume of Fluid)-based algorithm utilizing a fixed grid system has been investigated. In order to reduce numerical smearing at the free surface represented on a fixed grid system, a new free surface tracking algorithm based on the donor-acceptor scheme has been presented. Novel features of the proposed algorithm are characterized as two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby-cell to determine the fluid volume flux at each cell boundary. The proposed algorithm can be easily implemented in any irregular non-uniform grid systems that are usual in finite element method (FEM). Moreover, the proposed algorithm can be extended and applied to the 3-D free surface flow problem without additional efforts. For computation of unsteady incompressible flow, a finite element approximation based on the explicit fractional step method has been adopted. In addition, the SUPG(streamline upwind/Petrov-Galerkin) method has been implemented to deal with convection dominated flows. Combination of the proposed free surface tracking scheme and explicit fractional step formulation resulted in an efficient solution algorithm. Validity of the present solution algorithm was demonstrated from its application to the broken dam and the solitary wave propagation problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8B
• /
• pp.819-825
• /
• 2002

Resolution 221 requests the ITU-R to conduct studies, as a matter of urgency, on the feasibility of utilizing HAPS system as a base station to provide IMT-2000 services. And HAPS base stations should not cause harmful interference to the cellular IMT-2000 services. To study on the interference between HAPS system and cellular system is divided into two cases. One is the interference into HAPS system from the cellular system and the other is the interference into the cellular system from HAPS system. Since the former case has been already studied[1]. this paper describes the interference the interference to the noise power ration(I/N) with various parameters, such as the transmitting power, the number of users per cell, maximum antenna gain and the multibeam cell radius of HAPS. With the proposed estimation, we can determine the optimum values of various parameters in HAPS IMT-2000 system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.2
• /
• pp.95-109
• /
• 2014

In this study, the concentration of odorants released from albumin (EA) and yolk (EY) portions of boiled egg samples were determined as a function of storage time. The concentrations were measured at storage days of 0, 1, 3, 6, and 9 under room temperature. As such, odorants produced during both fresh and decay conditions were measured through time. A total of 19 compounds were selected as the main target odorants along with 12 reference compounds. GC-MS (for VOC) and GC-PFPD system (for sulfur gases) equipped with thermal desorption (TD) system were employed for odorant analysis in this work. The initial concentrations measured from the chamber system were converted into flux terms ($ng{\cdot}g^{-1}{\cdot}min^{-1}$). The EA showed the highest concentration of $H_2S$ (234 $ng{\cdot}g^{-1}{\cdot}min^{-1}$) at EA-0, and the concentrations of AT (Acetone) was also seen clearly in the range of 11.7 (EA-0) to 58.6 $ng{\cdot}g^{-1}{\cdot}min^{-1}$ (EA-9). The EY showed similar patterns. EtAl (Ethyl alcohol) increased 9.47 (EA-1) to 96.7 $ng{\cdot}g^{-1}{\cdot}min^{-1}$ (EA-9) in EA samples. Ketone, alcohol, sulfur groups generally exhibited high concentrations compared to other odorants. These data were also compared in relation to olfactometry related dilution-to-threshold (D/T) ratio by air dilution sensory (ADS) test and sum of odor intensity (SOI).

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.279-286
• /
• 2013

Purpose: This study was conducted to analyze the utilization efficiencies of electric energy and photosynthetically active radiation of lettuce grown under red LED, blue LED and fluorescent lamps with different photoperiods. Methods: Red LED with peak wavelength of 660 nm and blue LED with peak wavelength of 450 nm were used to analyze the effect of three levels of photoperiod (12/12 h, 16/8 h, 20/4 h) of LED illumination on light utilization efficiency of lettuce grown hydroponically in a closed plant production system (CPPS). Cool-white fluorescent lamps (FL) were used as the control. Photosynthetic photon flux, air temperature and relative humidity in CPPS were maintained at 230 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, $22/18^{\circ}C$ (light/darkness), and 70%, respectively. Electric conductivity and pH were controlled at 1.5-1.8 $dS{\cdot}m^{-1}$ and 5.5-6.0, respectively. The light utilization efficiency based on the chemical energy converted by photosynthesis, the accumulated electric energy consumed by artificial lighting sources, and the accumulated photosynthetically active radiation illuminated from artificial lighting sources were calculated. Results: As compared to the control, we found that the accumulated electric energy consumption decreased by 75.6% for red LED and by 70.7% for blue LED. The accumulated photosynthetically active radiation illuminated from red LED and blue LED decreased by 43.8% and 33.5%, respectively, compared with the control. The electric energy utilization efficiency (EEUE) of lettuce at growth stage 2 was 1.29-2.06% for red LED, 0.76-1.53% for blue LED, and 0.25-0.41% for FL. The photosynthetically active radiation utilization efficiency (PARUE) of lettuce was 6.25-9.95% for red LED, 3.75-7.49% for blue LED, and 2.77-4.62% for FL. EEUE and PARUE significantly increased with the increasing light period. Conclusions: From these results, illumination time of 16-20 h in a day was proposed to improve the light utilization efficiency of lettuce grown in a plant factory.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.89.1-89.1
• /
• 2011

We have investigated a coronal jet near the limb on 2010 June 27 by Hinode/X-Ray Telescope (XRT), EUV Imaging Spectrograph (EIS), Solar Optical Telescope (SOT), SDO/Atmospheric Imaging Assembly (AIA), and STEREO. From EUV (AIA and EIS) and soft X-ray (XRT) images we identify the erupting jet feature in cool and hot temperatures. It is noted that there was a small loop eruption in Ca II images of the SOT before the jet eruption. Using high temporal and multi wavelength AIA images, we found that the hot jet preceded its associated cool jet. The jet also shows helical-like structures during the rising period. According to the spectroscopic analysis, the jet structure changes from blue shift to red one with time, implying the helical structure of the jet. The STEREO observation, which enables us to observe this jet on the disk, shows that there was a dim loop associated with the jet. Comparing the observations from the AIA and STEREO, the dim loop corresponds to the jet structure which implies the heated loop. Considering that the structure of its associated active region seen in STEREO is similar to that in AIA observed 5 days before, we compared the jet morphology on the limb with the magnetic fields extrapolated from a HMI vector magnetogram observed on the disk. Interestingly, the comparison shows that the open field corresponds to the jet which is seen as the dim loop in STEREO. Our observations (XRT, SDO, SOT, and STEREO) are well consistent with the numerical simulation of the emerging flux reconnection model.

• Membrane and Water Treatment
• /
• v.2 no.4
• /
• pp.251-266
• /
• 2011

This work deals with the use of High Resolution Scanning Electron Microscopy (HRSEM) to verify ultrafiltration membrane selectivity at the end of the production line as well as membrane ageing. The first part of this work is focused on new membranes. It is shown that it is better to use sputtering metallization than vacuum deposition, as this latter technique entails thermal damage to the skin layer. Moreover, the impact of the metallization layer on the determination of the membrane pore size is studied and it is observed that no impact of the metallization step can be clearly defined for a metallization layer ranging from 3 to 12 nm. For example, an average pore size of 16.9 nm and a recovery rate of 6.5 % are observed for a 150 kDa cellulose acetate membrane. These results are in agreement with those given by the manufacturer: pore size ranging from 10 to 15 nm and recovery rate ranging from 5 to 10 %. The second part of this work focuses on the study of membrane ageing. A PVDF hollow fibre membrane is studied. It is shown that a 65 % decrease in the permeate flux can be linked to a decrease in the number of pores at the surface of the membrane and a decrease in the recovery rate. In conclusion, a mapping of the pores is performed for several new hollow fibre membranes used to produce drinking water, made of different materials, with different geometries and molecular weight cut-off. These results provide reference data that will help better understand the phenomena of membrane fouling and membrane ageing.