• 제목/요약/키워드: fluorination

검색결과 130건 처리시간 0.032초

극친수/극소수 표면에서 탄산용액의 기포 발생 촉진/억제 효과 분석 연구 (Effect of Promoting/Inhibiting Bubble Generation of Carbonate Solution on Superhydrophilic/Superhydrophobic Surfaces)

  • 이정원
    • 한국기계가공학회지
    • /
    • 제21권7호
    • /
    • pp.77-83
    • /
    • 2022
  • When carbon dioxide in a liquid becomes supersaturated, carbon dioxide gas bubbles are generated in the liquid, and they ascend to the surface as they develop further. At this time, the inner wall of the cup with carbon gas attached is known as the entrapped gas cavity (EGS); once an EGS is established, it does not disappear and will continuously create carbon bubbles. This bubbling phenomenon can be activated or suppressed by changing the properties of the solid surface in contact with the carbonated liquid. In this study, the foaming of carbonated liquid is promoted or suppressed by modifying the wettability of the surface. A micro/nano surface structure is formed on the surface of an aluminum cup to produce a superhydrophilic surface, and a superhydrophobic surface similar to a lotus leaf is synthesized via fluorination. Experiment results show that the amount of carbon dioxide bubble generated differs significantly in the first few seconds depending on the surface, and that the amount of gas generated after it enters the stabilization period is the same regardless of the wettability of the cup surface.

Effect of process parameters on the recovery of thorium tetrafluoride prepared by hydrofluorination of thorium oxide, and their optimization

  • Kumar, Raj;Gupta, Sonal;Wajhal, Sourabh;Satpati, S.K.;Sahu, M.L.
    • Nuclear Engineering and Technology
    • /
    • 제54권5호
    • /
    • pp.1560-1569
    • /
    • 2022
  • Liquid fueled molten salt reactors (MSRs) have seen renewed interest because of their inherent safety features, higher thermal efficiency and potential for efficient thorium utilisation for power generation. Thorium fluoride is one of the salts used in liquid fueled MSRs employing Th-U cycle. In the present study, ThF4 was prepared by hydro-fluorination of ThO2 using anhydrous HF gas. Process parameters viz. bed depth, hydrofluorination time and hydrofluorination temperature, were optimized for the preparation of ThF4 in a static bed reactor setup. The products were characterized with X-Ray diffraction and experimental conditions for complete conversion to ThF4 were established which also corroborated with the yield values. Hydrofluorination of ThO2 at 450 ℃ for half an hour at a bed depth of 6 mm gave the best result, with a yield of about 99.36% ThF4. No unconverted oxide or any other impurity was observed. Rietveld refinement was performed on the XRD data of this ThF4, and Chi2 value of 3.54 indicated good agreement between observed and calculated profiles.

새집증후군 유발 벤젠가스 흡착에 미치는 활성탄소섬유의 함산소불소화 영향 (Effect of Oxyfluorination of Activated Carbon Fibers on Adsorption of Benzene Gas Causing Sick House Syndrome)

  • 임형순;김민지;공은영;정진도;이영석
    • 공업화학
    • /
    • 제29권3호
    • /
    • pp.312-317
    • /
    • 2018
  • 본 연구에서는 새집증후군 원인가스 중 하나인 벤젠 가스 흡착특성을 향상시키기 위하여 활성탄소섬유에 함산소불소화 처리를 실시하였다. 함산소불소화 처리된 활성탄소섬유 표면특성 및 기공특성은 X-선광전자분광기(XPS)와 Brunauer-Emmett-Teller (BET) 분석을 통해 확인하였으며, 벤젠 가스 흡착 특성은 가스크로마토그래피(GC)로 평가하였다. XPS 결과로부터 불소분압이 증가함에 따라 활성탄소섬유 표면의 불소관능기가 증가함을 알 수 있었다. 함산소불소화 처리 후 모든 샘플의 비표면적은 감소하였으나, 불소 분압이 0.1 bar일 때 그 미세기공 부피비가 증가하였다. 함산소불소화 처리된 활성탄소섬유는 11 h 동안 100 ppm의 벤젠 가스를 모두 흡착하였으며, 이는 미처리 활성탄소섬유와 비교하여 벤젠 가스 흡착효율이 약 2배 향상됨을 알 수 있었다.

A Study on Etching of $UO_2$, Co, and Mo Surface with R.F. Plasma Using $CF_4\;and\;O_2$

  • Kim Yong-Soo;Seo Yong-Dae
    • Nuclear Engineering and Technology
    • /
    • 제35권6호
    • /
    • pp.507-514
    • /
    • 2003
  • Recently dry decontamination/surface-cleaning technology using plasma etching has been focused in the nuclear industry. In this study, the applicability of this new dry processing technique are experimentally investigated by examining the etching reaction of $UO_2$, Co, and Mo in r.f. plasma with the etchant gas of $CF_4/O_2$ mixture. $UO_2$ is chosen as a representing material for uranium and TRU (TRans-Uranic) compounds while metallic Co and Mo are selected because they are the principal contaminants in the used metallic nuclear components such as valves and pipes made of stainless steel or inconel. Results show that in all cases maximum etching rate is achieved when the mole fraction of $UO_2\;in\;CF_4/O_2$ mixture gas is $20\%$, regardless of temperature and r.f. power. In case of $UO_2$, the highest etching reaction rate is greater than 1000 monolayers/min. at $370^{\circ}C$ under 150 W r.f. power which is equivalent to $0.4{\mu}m/min$. As for Co, etching reaction begins to take place significantly when the temperature exceeds $350^{\circ}C$. Maximum etching rate achieved at $380^{\circ}C\;is\;0.06{\mu}m/min$. Mo etching reaction takes place vigorously even at relatively low temperature and the reaction rate increases drastically with increasing temperature. Highest etching rate at $380^{\circ}C\;is\;1.9{\mu}m/min$. According to OES (Optical Emission Spectroscopy) and AES (Auger Electron Spectroscopy) analysis, primary reaction seems to be a fluorination reaction, but carbonyl compound formation reaction may assist the dominant reaction, especially in case of Co and Mo. Through this basic study, the feasibility and the applicability of plasma decontamination technique are demonstrated.

불소화 메조페이스 핏치로 제조된 그라파이트 폼의 물리/화학적 특성 (Physical-Chemical Properties of Graphite Foams Produced with Fluorinated Mesophase Pitch)

  • 김지현;김도영;이형익;이영석
    • Korean Chemical Engineering Research
    • /
    • 제54권6호
    • /
    • pp.830-837
    • /
    • 2016
  • 그라파이트 폼의 압축강도를 향상시키기 위하여 메조페이스 핏치를 공기분위기에서 산화안정화 한 후 다양한 불소 부분압으로 처리하였다. 불소화 처리된 메조페이스 핏치의 불소/탄소 표면화학 조성은 불소 부분압에 따라서 약 23.75%~61.48%의 범위를 가진다. 불소화 메조페이스 핏치기반 그라파이트 폼의 압축강도는 겉보기 밀도의 증가에 비례하여 증가되었다. 불소/탄소 표면화학 조성이 35.93%의 값을 갖는 메조페이스 핏치로부터 제조된 그라파이트 폼의 압축강도는 최대 $2.93{\pm}0.06MPa$의 값을 보여 주었으며, 이 값은 미처리된 메조페이스 핏치로부터 제조된 그라파이트 폼과 비교하여 27.95% 증가되었다. 이러한 결과는 표면에너지가 큰 불소 작용기로 인한 메조페이스 핏치간의 계면결합력이 그 압축강도를 증가시켰기 때문으로 여겨진다.

폴리이미드-액정 계면의 특성에 따른 액정 배향의 특성 및 안정성 (Characteristics and Stability of Liquid Crystal Alignment for Interfacial Properties of Polyimide-Liquid Crystal)

  • 동원석;이미혜;백상현
    • 폴리머
    • /
    • 제27권5호
    • /
    • pp.484-492
    • /
    • 2003
  • 러빙에 의해 유도된 네마틱 액정의 배향 특성과 그 안정성이 액정-폴리이미드 계면 특성과 어떠한 관계가 있는지를 조사하였다. 합성된 5 종류의 폴리이미드 특성을 분석하고 폴리이미드 배향막에서의 액정 배향의 균일성, 선경사각, 정착 에너지, 그리고 열 안정성을 측정 조사하였다. 러빙된 폴리이미드는 강한 정착의 액정 배향을 유도하고 액정 배향의 특성과 안정성은 배향막 표면에서의 액정과 폴리이미드 간의 분자 차원의 상호작용에 의해 결정된다는 것을 확인하였다. 폴리이미드의 유연성의 증가는 이미드화를 촉진시키며 액정의 선경사각과 배향 안정성을 증대시킨다. 반면에, 폴리이미드의 플루오르화는 액정의 배향성 및 배향 안정성을 감소시키는 것으로 나타났다. 폴리이미드의 방향족과 지방족 고리 이무수물 구조에 따른 액정 배향의 특성과 안정성에는 뚜렷한 차이가 나타나지 않았다.

정전위법에 의한 n-PFOSF 합성 (Electrosynthesis of n-PFOSF with Potential Operation)

  • 이종일;태범석
    • 공업화학
    • /
    • 제7권3호
    • /
    • pp.473-480
    • /
    • 1996
  • 불소계 계면활성제 및 정밀화학제품의 precursor로 널리 쓰이는 n-perfluorooctanesulfonyl fluoride(n-PFOSF)를 전해불소화 반응으로 제조하는 과정에서 전극 및 반응물의 분극특성의 조사와 불소발생 전위를 측정하였다. 그리고 회분식 전해반응기를 사용하여 정전위법으로 전해반응을 실시하고 반응 종료후 전극과 생성물을 GC, GC/MS, IR 등으로 분석하여 반응과정에 대한 기초자료를 얻으려 하였다. 불소기체의 생성전위는 침적전위 붕괴곡선으로 부터 약 2.8V(vs. $Cu/CuF_2$)로 보이며 니켈불화물이 덮힌 상태의 전극에서 불소화반응이 진행된다. 회분식 반응기에서 정전위법에 의한 전해불소화 반응은 초기의 전기화학 반응과 후반의 화학반응의 두 단계로 구분된다. 생성물은 전극에 부여된 전위가 낮을수록 적게 생성되며 7V(vs. $Cu/CuF_2$) 이상 반응물의 무게비로 약 100% 정도를 유지하며 일정해지며 생성물의 분포도 7V(vs. $Cu/CuF_2$) 이상에서 부터 PFOSF의 생성율이 일정해진다.

  • PDF

성남시 12세 아동의 구강보건의식에 대한 조사 (A Study on How 12 Year-Old Children are Aware of the Dental Health in Seongnam city)

  • 송귀숙;안용순;김미정
    • 치위생과학회지
    • /
    • 제4권1호
    • /
    • pp.27-32
    • /
    • 2004
  • This study intended to identify how our children are aware of dental health and motivate them to learn reasonable knowledge about dental health. Furthermore, it also aimed to induce them to change their awareness and behavioral style about dental health, so that they may keep good habits for dental health for their lifetime. Total 1,044 samples were collected from children who were all 12 years old and lived in Seongnam city. During six months (June to December 2002), they were asked to participate in questionnaire survey about consumer behavior, knowledge, attitude, activity and self-diagnosis for dental health. The results of questionnaire survey can be outlined as follows: (1) The results of investigating consumer behavior for dental health showed that 34.5% of total respondents ever visited dental clinics once or more within latest one year, 21.4% ever visited dental clinics for the sake of prevention, 70.6% were instructed in dental health program, 31.7% were treated with the fluorination, 36.9% were treated with dental sealant, and 17.1% were treated with scaling, respectively. (2) For 10 items asking reasonable knowledge about dental health, respondents answered to 5.06 items on average. (3) For 10 items asking reasonable attitude for dental health, respondents answered to 5.41 items on average. (4) For 10 items asking reasonable behavior, respondents answered to 4.53 items. (5) For 10 items asking reasonable self-diagnosis for dental health, respondents answered to 5.65 items.

  • PDF

금 나노입자 형성을 이용한 계층구조 SiO2 코팅층의 제조 및 표면 특성 (Synthesis and Surface Properties of Hierarchical SiO2 Coating Layers by Forming Au Nanoparticles)

  • 김지영;김은경;김상섭
    • 한국재료학회지
    • /
    • 제23권1호
    • /
    • pp.53-58
    • /
    • 2013
  • Superhydrophobic $SiO_2$ layers with a micro-nano hierarchical surface structure were prepared. $SiO_2$ layers deposited via an electrospray method combined with a sol-gel chemical route were rough on the microscale. Au particles were decorated on the surface of the microscale-rough $SiO_2$ layers by use of the photo-reduction process with different intensities ($0.11-1.9mW/cm^2$) and illumination times (60-240 sec) of ultraviolet light. With the aid of nanoscale Au nanoparticles, this consequently resulted in a micro-nano hierarchical surface structure. Subsequent fluorination treatment with a solution containing trichloro(1H,2H,2H,2H-perfluorooctyl)silane fluorinated the hierarchical $SiO_2$ layers. The change in surface roughness factor was in good agreement with that observed for the water contact angle, where the surface roughness factor developed as a measure needed to evaluate the degree of surface roughness. The resulting $SiO_2$ layers revealed excellent repellency toward various liquid droplets with different surface tensions ranging from 46 to 72.3 mN/m. Especially, the micro-nano hierarchical surface created at an illumination intensity of $0.11mW/cm^2$ and illumination time of 60 sec showed the largest water contact angle of $170^{\circ}$. Based on the Cassie-Baxter and Young-Dupre equations, the surface fraction and work of adhesion for the micronano hierarchical $SiO_2$ layers were evaluated. The work of adhesion was estimated to be less than $3{\times}10^{-3}N/m$ for all the liquid droplets. This exceptionally small work of adhesion is likely to be responsible for the strong repellency of the liquids to the micro-nano hierarchical $SiO_2$ layers.

有機할로겐化合物과 KF의 反應 (第3報) 芳香族이웃디할라이드의 弗化反應 (Reaction of Organic Halogen Compounds with Potassium Fluoride. (Ⅲ) Fluorination of Aromatic vic-dihalides)

  • 김유선;김기수
    • 대한화학회지
    • /
    • 제13권1호
    • /
    • pp.68-74
    • /
    • 1969
  • ${\alpha},{\beta$}-dichloro-${\beta$}-phenyl propionate, Ethyl ${\alpha},{\beta$}-dibromo-${\beta$}-phenyl propionate, Etyyl ${\alpha},{\beta$}-dichloro-${\beta$}-(p-chlorophenyl)propionate, 및 dibromo-styrene 等의 化合物을 各種溶媒(dimethly formamide, diethylene glycol, 및 diethylene glyco monomethyl ether 等) 存在下에서 弗化反應을 시켜 보았으며 放射性弗素-18을 追跡子로 使用하여서 위의 化合物들의 弗化카리에 對한 反應度를 檢査하여 보았다. 一般的으로 弗化反應 生成物은 모노弗化物과 脫할로겐된 二重結合物을 生成하였다. diethylglycol 存在下에서 高溫反應시킨 條件下에서는 二重結合生成物이 많았고 diethylene glyco-monoethyl ether 存在下에서 低溫反應시킨 條件下에서는 弗化物이 多量生成하였다. 모노弗化物의 合成方式 및 確認方法에 關하여 說明하였으며 本反應의 合成上의 用途($F^{18}$ 標識化合物包含)에 言及하였다.

  • PDF