• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.2
• /
• pp.405-421
• /
• 1997

The main purpose of this study was to evaluate the acid resistance and antimicrobial effect of fluoride-laser combined application. Recently extracted third molars were used. $5{\times}3mm$ of the buccal and lingual specimens were exposed and incipient artificial carious lesions were formed by keeping them in the artificial cariogenic solution for 5 days. They were divided into five groups and treated with fluoride and laser according to the predetermined regimen. The acid resistance was compared between groups by chemical quantitative analysis of the calcium and phosphorous released into the test solution after single or combined application of fluoride and laser. The antimicrobial effect of each group was analyzed by counting the number of colony forming units after microbial incubation. The results from the present study can be summarized as follows; 1. Experimental groups showed lower values in calcium and phosphorous contents as well as in $CFU/m{\ell}$(colony forming units) than control group. Combined application groups showed lower values than single application groups. 2. Acid resistance and antimicrobial effect by fluoride and laser treatment were confirmed in this study. 3. Based upon the above-mentioned results of this study, it can be assumed that the use of laser-fluoride combined application may provide the child and adolescent patient population with antimicrobial effect as well as acid resistance. Further studies using various materials and experimental conditions are being encouraged.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.1
• /
• pp.151-159
• /
• 2019

Objective: This study aimed to investigate the relation between rinsing time and the change in enamel surface after fluoride application on the enamel surface. Methods: We recruited two sample groups with different mouth rinsing times. While one group rinsed the teeth immediately after applying acidulated phosphate fluoride (APF) gel, the other group rinsed the teeth 30 minutes after APF gel application. In each group, we performed the following four-step experiment: (i) apply APF gel on the teeth, (ii) rinse the teeth, (iii) immerse the teeth in orange juice, and (iv) measure enamel surface microhardness and scan enamel surfaces. Results: The group that rinsed 30 minutes after treatment exhibited greater microhardness than the group that rinsed immediately after fluoride treatment. The former also showed smooth and regular crystallization, whereas the latter showed rough and damaged crystallization and irregular surfaces. Conclusions: Based on these observations, we conclude that delaying the rinsing time improves the dental caries preventive effect of fluoride.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.1
• /
• pp.113-122
• /
• 2012

Objectives : This study was carried out to investigate the caries resistant effect of fluoride by dental polishing prior to fluoride application in vitro. Methods : Artificial caries lesion was made on the surface of specimen enamel taken from cow's permanent cuspid on the part of labial surface after resin embedding and polishing. Artificial dental plaque was formed on the 72 dental specimen 25~45 VHN(Vickers Hardness Number) which were divided into three groups(fluoride varnish, APF gel, control) with dental polishing and without polishing respectively. Fluoride varnish and APF gel group with 20 second polishing or without polishing were immersed in the artificial saliva respectively. Control group with or without polishing were immersed in the artificial saliva. Results : 1. Significant difference was not found by fluoride varnish between polishing group and non polishing group (p>0.01). 1) polishing group. The changes of Vickers Hardness Number(VHN) were $14.49{\pm}13.73$. 2) non-polishing group. The changes of VHN were $11.67{\pm}5.39$. 2. Significant difference was not found by APF gel between polishing group and non polishing group (p>0.01). 1) polishing group. The changes of VHN were $8.48{\pm}8.37$. 2) non-polishing group. The changes of VHN were $5.32{\pm}2.59$. Conclusions : Showed no significant difference between polishing group and non-polishing group regardless of fluoride materials (fluoride varnish, APF gel).

• Analytical Science and Technology
• /
• v.37 no.2
• /
• pp.87-97
• /
• 2024

The appropriate intake of fluoride (F^-) is beneficial to human health; however, the over-consumption can result in various potentially harmful effects. This study compared different colorimetric reagents, i.e., aluminium-xylenol orange (Al-XO), zirconium-xylenol orange (Zr-XO), and zirconium-alizarin red S (Zr-ARS), for fluoride measurements by the UV-Vis, in terms of reaction mechanisms, method sensitivity, and interferences from aluminium and ferric ions. The colorimetric procedures were optimized, and the analytical methods were evaluated. The goodness of linearity (R² > 0.998) was obtained for all three assays within the concentration range of 1.0-20.0 mg/L fluoride in deionized water, in which the method sensitivity followed the descending order of Zr-XO > Al-XO > Zr-ARS. The Zr-XO was applied for determining the fluoride in different tea extracts in water (90 ℃ and 60-minute-brewing) and black tea demonstrated the highest fluoride content (3.0-3.6 mg/L). The effects of brewing time and temperature on the release of fluoride in the tea extracts were also investigated, indicating these are critical factors for the fluoride extraction. This study highlighted the application potentials of the UV-Vis measurement as a simple, convenient, and cheap analytical approach and discussed different colorimetric reagents used for fluoride determination in tea extracts in the context that the UV-Vis spectrophotometers are commonly equipped in most laboratories.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.207-224
• /
• 1996

This study was designed to determine the most effective concentration of fluoride and energy density of laser irradiation for the anticarious effect. For this study surface hardness in enamel was measured before and after irradiation with pulsed Nd;YAG laser and the topical application of fluoride. Of the permanent mandibular anterior hovine teeth, healthy, carious free ones were used. Three hundred specimens were made. Specimens within 25~45 Vickers hardness numbers were assigned to 20 control and experimental stoops ; each containing 15 specimens. After forming artificial carious lesions, 10 J/$\textrm{cm}^2$, 20 J/$\textrm{cm}^2$, and 30 J/$\textrm{cm}^2$ energies were irradiated on the enamel surface of each experimental group. Also NaF, NH4F, Elmex gel(amine fluoride) and APF gel fluoride compounds were applied topically. Next, all the specimens were placed into the pH circulatory procedures for eight days. Vickers hardness numbers were measured using a microhardness tester. Surface changes of the enamel were observed using an scanning electron microscope. The comparative ana1ysis yielded the following results : 1. The reduction of surface hardness of the enamel surface was less in all groups with fluoride application than in the group without fluoride application. 2. The APF gel croup with 10 J/$\textrm{cm}^2$ irradiation showed the lowest reduction of surface hardness. 3. The reduction of surface hardness of the enamel surface in the group of laser irradiation without fluoride application not showed any significant difference according to the energy density of the laser. 4. Under the scanning electron microscope, in enamel irradiated with 10J/$\textrm{cm}^2$ showed appearance similar to acid etching surface. In enamel irradiated with 20 J/$\textrm{cm}^2$, line enamel crack was detected. In enamel irradiated with 30j/$\textrm{cm}^2$, severe enamel crack and fusion of enamel were detected. These results suggest that one could obtain the best anticariogenic effects without damage to teeth in the group of application of APF gel after laser irradiation with 10 J/$\textrm{cm}^2$.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.75-79
• /
• 2022

Objective: To investigate remineralizing effect of three fluoride regimens on artificially demineralized enamel around orthodontic bracket by analyzing mineral density (MD) acquired from micro-computed tomography (micro-CT). Methods: Forty-eight bracket bonded bovine incisors were prepared to create demineralized enamel (DE) surface. The samples were divided into four groups according to the fluoride regimen: 1) no fluoridation, 2) 1.23% acidulated phosphate fluoride (APF) gel, 3) fluoridated toothpaste, and 4) 0.05% sodium fluoride mouthwash. Micro-CT was scanned after demineralization (T0), and 2 weeks (T1) and 4 weeks (T2) of fluoridation. Results: APF gel showed highest remineralization of DE during T1-T0 interval among the groups (p < 0.05); followed by toothpaste, mouthwash and no fluoridation. APF gel and toothpaste demonstrated significant increase in MD after 4 weeks of application (p < 0.05). Conclusions: Remineralization effects of three fluoride regimens were depicted through micro-CT analysis, of which APF gel was most effective.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.279-288
• /
• 2019

To obtain insightful knowledge of geochemical process controlling fluoride enrichment in groundwater of the villages near Shilabati river bank, West Bengal, India, multivariate statistical techniques were applied to a subgroup of the dataset generated from major ion analysis of groundwater samples. Water quality analysis of major ion chemistry revealed elevated levels of fluoride concentration in groundwater. Factor analysis (FA) of fifteen hydrochemical parameters demonstrated that fluoride occurrence was due to the weathering and dissolution of fluoride-bearing minerals in the aquifer. A strong positive loading (> 0.75) of fluoride with pH and bicarbonate for FA indicates an alkaline dominated environment responsible for leaching of fluoride from the source material. Mineralogical analysis of soli sediment exhibits the presence of fluoride-bearing minerals in underground geology. Hierarchical cluster analysis (HCA) was carried out to isolate the sampling sites according to groundwater quality. With HCA the sampling sites were isolated into three clusters. The occurrence of abundant fluoride in the higher elevated area of the observed three different clusters revealed that there was more contact opportunity of recharging water with the minerals present in the aquifer during infiltration through the vadose zone.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.212-222
• /
• 2004

The application of acidulated phosphate fluoride gel(APF) and fluoride varnishes are the most common topical fluoride therapy. The purpose of this in vitro study was to compare the remineralization effects of two topical fluoride agents, APF gel and fluoride varnish with microtomograph and 3D image analyzer without sample preparation and chemical fixation. For the purpose of the study, the artificial caries lesion was caused on the caries-free permanent pre molar and 48 specimens were divided into three groups each containing 16 specimens No application was performed on group 1, which acted as control group. Group 2 was treated with APF gel and was removed after a minute. Group 3 was treated with the topical application of fluoride varnish and removed after 45 minutes. Each specimen was placed into a closed container with 50ml of a artificial saliva during three months and the 3D images of the remineralization area were taken using the SkyScan each month. Using the density-measuring program in V $works^{TM}$, the density value of the remineralization area was measured. The following results were obtained: 1. All groups demonstrated an increase in the density of artificial caries lesion with time. 2. The density was significantly higher in APF gel and fluoride varnish group than control group at 1 month, 2 months, 3 months after the treatment(P<0.05). 3. The difference of the density between that "prior to treatment" and that "1 month after treatment" in Group 2 and Group 3 was significantly higher than that of Group 1 and, the difference of the density between that "1 month after treatmen" and that "2 month after treatment" in Group 3 was significantly higher than that of Group 1 and 2(P<0.05). 4. The fluoride varnish was more effective after 2 and 3 months and continuous than the APF gel.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.580-588
• /
• 2014

Fluoride use is the best and widespread method for dental caries prevention. The aim of this study was to investigate experience and recognition of fluoride for caries prevention focusing on majors in one university. Four hundred twenty-four university students were selected by convenience sampling with informed consent and answered the questionnaire by self recording type. The subjects except dental hygiene students knew about purpose of fluoride use (84.6%), over the count fluoride rinse (63.2%), fluoride toothpaste (61.5%), professional fluoride application (56.4%) and water fluoridation (43.6%). They experienced over the count fluoride rinse (67.5%), school fluoride rinse (45.3%), professional fluoride application (30.8%), fluoride toothpaste (28.2%) and water fluoridation (12.0%). The main information paths about fluoride were university lectures among dental hygiene students and internet and mass media, followed by nurse-teachers among non dental hygiene students. The ratios of intention to use fluoride were: 67.8% in dental hygiene, 34.9% in health, 51.4% in non-health in case of professional fluoride application for oneself, 93.1% in dental hygiene, 48.0% in health, 50.4% in non-health in case of professional fluoride application for their children, 79.0% in dental hygiene, 51.3% in health, 55.8% in non-health in case of water fluoridation. The subjects to experience and recognize fluoride for caries prevention had more positive intention to use fluoride. The answers of students majoring in health or medical care were not different from non-health, except dental hygiene. Dental professionals should try to let the public know about fluoride use for caries prevention through mass media and internet as well as individual education in dental clinics.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.408-419
• /
• 2007

In the child, it is very important that he/she will have the ability to suppress aesthetic restorative materials of secondary caries. With the representative preventive material against caries, the importance of fluoride is more emphasized. This study examined the differences in fluoride release and re-uptake among some restorative materials, following a treatment of APF gel and fluoride varnish. The surface roughness was observed under scanning electron microscope. Studying this will provide for the research to find effective restorative materials and fluoride type in tooth caries prevention. It is applied from presence at a clinic that restorative materials are resin, flowable resin, compomer and glass ionomer. Fluoride release was measured at 24-hour intervals for 7 days, 3-day intervals from 8th to 38th day using an ion-selective electrode and analyzer. Then, the materials were treated with the fluoride gel and fluoride varnish respectively, fluoride release was measured and specimens were evaluated under scanning electron microscope for 4 weeks. It was concluded that 1. Fluoride was released for 38 days from restorative materials under 1 ppm in case of flowable resin, 1-2 ppm in compomer and 2-8 ppm in glass ionomer, a few of fluoride was released after 45 days 2. Fluoride has more releasing after application of APF gel than fluoride varnish. Fluoride re-uptake was observed under 0.6-0.2 ppm in fluoride varnish and 0.6-2.6 ppm in APF gel after starting the procedure one day(p<0.05). For the remaining 4 weeks, they demonstrated a similar release. 3. Specimens were evaluated under scanning electron microscope. Applied fluoride in the experimental group surface was rougher than the control group that did not receive fluoride application. Fluoride varnish group had a smoother surface than both the APF gel group and the varnish APF gel group that received a fluoride application.