• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.229-232
• /
• 2003

In the roll forming process, a sheet or strip of metal is continuously and progressively formed into a desired cross-sectional profile by feeding it through a series of forming roll. Accordingly, it is important to maintain the material properties of the initial sheet and deform uniformly during the roll forming. The roll forming process was estimated in consideration of some factors such as material properties, strip thickness, roll diameter, roll velocity, and the deformation of the material that influence the forming length. The hydroforming technology has been recognized as a new technique in manufacturing industry, especially in automotive industry. The formed pipe in used in hydroforming process is manufactured by the roll forming. The formability during hydroforming is very sensitive to the state of pipes which are made by roll forming. Particularly the amount of hardening during roll forming affects the formability. Therefore, it is necessary to design the optimum roll flower to reduce the local hardening. In this paper, optimum roll flower which has uniform strain distribution through sheet width was obtained by comparing strain distribution in various roll flower. Finite element analysis(FEA) is performed to estimate the strain distribution related to hardening by roll forming. A numerical analysis is carried out by SHAPE-RF.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.4
• /
• pp.251-256
• /
• 2000

Astragalus membranaceus has flowers that are similar to that of the legume family, but shows poor bearing when self-pollination is induced. Thus, this study was carried out observing the ripening procedure of pistils and stamens and development stages of pollen in the context of the birth and growth of the flower. As to the bearing of the flower of A. membranaceus, few pod setting and 13% pod setting were observed when self-pollination is induced by paper-bag covering or artificial pollination treated respectively. The result indicates that A. membranaceus is a cross-pollination plant. A pistil grew faster than a stamen until just before blooming. The flower size was about 17.0mm$\times$4.0mm. Pistils and stamens had the same length after flowering. Pollen mother cells passed through meiosis and mitosis when its length reached around 3.5mm, thus creating the tetrade when 4 mm long. Pollen attained full growth when the bud was about 10mm long. An anther was found to tend to dehisce when the length of a bud reached around 12.0mm. As to the shape of pollen, about 70 % were normal. 1% and 30 % were small or empty pollen respectively. The result indicates that pollen of A. membranaceus attains full growth just before anther dehiscence which occurs before blooming while pistils grow faster than stamens until before flowering.

• Journal of Power System Engineering
• /
• v.15 no.4
• /
• pp.5-10
• /
• 2011

In case of using rapid vacuum-freeze drying for high quality dry flower of flowering plant, the morphological and physiological characteristics of dry rose showed as the following. The dry ratio of about 82% presented after 1 day in case of using rapid vacuum-freeze drying and it was reached that the optimum storage water content of general dry products was 18%. The dry ratio of about 89% presented after 4 days. This result indicates very short dry time comparing with natural dry time of 12 days. Also, the morphological characteristics of flowering plant in case of vacuum-freeze drying showed similar shape with real flower. The contraction decreased about 9% comparing with real flower under dry time of 72 hours. But the contraction in case of natural dry decreased 36% and showed noticeable difference. The brightness which affects physiological characteristics of dry flowering plant showed lower values according to the dry process and chromaticity was thick. After 4 days, natural dry was thick with about 2 times comparing with vacuum-freeze drying. In case of vacuum-freeze drying, the quantity of anthocyanin and chlorophyl which affect discoloration and bleaching of dry flowering plant showed the clear difference comparing with natural dry method due to the sublimation by vacuum after rapid freeze with short initial time.

• Current Research on Agriculture and Life Sciences
• /
• v.15
• /
• pp.17-24
• /
• 1997

According to the morphological characteristics of leaves, and flowers, including leaf and flower color, 24 horticultural cultivars of Calanthe discolor and C. striata which were collected from Jaeju island of Korea and cultivated at similar environmental conditions in Taegu from 1995 to 1996 were classified newly. Variation ranges were relatively narrow flower shape and leaf. but wide in other characteristics among cultivars.

• Journal of the Korean Society of Tobacco Science
• /
• v.3 no.1
• /
• pp.49-57
• /
• 1981

To obtain genetic information for breeding aromatic tobacco, broad sense heritabilities, phenotypic, and genotypic correlations were obtained for the following characters : days to frowert, plant height, number of leaves, leaf shape and nicotine. Six pure line varieties and the first and second generations of 5 crosses among them were employed in this study. The heritabilities for number of leaves and nicotine were very high in pure line varieties. However, the heritabilities for days to flower and yield were low in six varieties as well as in F2. Genotypic correlations had higher values than phenotypic did. Heritabilities calculated from segregating generations were lower than those from pure varieties, regardless of crosses involved. Positive phenotypic correlations between yield and plant height were observed in all crosses. Same phenomenon was observed with correlations between days to flower and number of leaves. The genotypic and phenotypic variances and covariances entering into the computation of correlations were used to construct the seletion indices for yield. The use and limitation of selection index was also discussed.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.4
• /
• pp.263-268
• /
• 2002

Acifluorfen-tolerant callus lines of Solanum ptycanthum were isolated by stepwise selection. Growth of the unselected line was completely inhibited at 0.5 uM. while some selected lines grew at 8 uM acifluorfen. Twenty-two of twenty-five acifluorfen-tolerant callus lines regenerated shoots. Many of the regenerated somaclones were variants, differing in leaf shape, leaf color, number of flower parts, flower color, and fertility. The acifluorfen tolerant S. ptycanthum callus lines differed.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.2
• /
• pp.135-141
• /
• 1989

The experiment was conducted to obtain basic information on breeding of flue-cured tobacco varieties. Nine cultivars and partial diallel set of 36 F1 hybrides were grown at Taegu Experiment Station, Korea Ginseng & Tobacco Research Institute in 1983. Estimated heritability in the narrow-sense ranged from 66.21% to 94.12% for yield, leaves per plant, days to flower, leaf weight, leaf width, leaf shape, nicotine content and reducing sugar content, while that for stalk height, leaf length, midrib weight and midrib width ranged from 28.12% to 56.25%. The genotypic correlations were positive among yield, leaf weight, leaf length, leaf width, midrib weight and midrib width in the middle leaves, days to flower, nicotine content and reducing correlated with leaf length than leaf width. At the path coefficient analysis of the effect of leaf and midrib characters upon yield according to stalk position, leaf weight, leaf width and midrib width in the middle leaves, and leaf weight, and leaf width in the top leaves showed high direct effects.

• Korean Journal of Plant Resources
• /
• v.17 no.1
• /
• pp.54-57
• /
• 2004

These studies were carried out to develop native Calanthe in Korea. Calanthe native to southern islands in Korea has beautiful flowers with various color and sweet fragrance, and it has been reported to have very good ornamental value. According to the morphological characteristics of leaves and flower color, 57 horticultural lines of Calanthe collected in natural crossing group were investigated. And the selected orchid was given a name of horticultural cultivar to ‘Narai’. In its color of flower, sepal was deep purplish red, petal was yellow and lip was white. And also, ‘Narai’ had strong fragrance and shape of blooming was flat-blooming type.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.27 no.2
• /
• pp.146-159
• /
• 2023

This paper proposes a hybrid algorithm combining K-means clustering and watershed algorithms for flower segmentation and counting. We use the K-means clustering algorithm to obtain the main colors in a complex background according to the cluster centers and then take a color space transformation to extract pixel values for the hue, saturation, and value of flower color. Next, we apply the threshold segmentation technique to segment flowers precisely and obtain the binary image of flowers. Based on this, we take the Euclidean distance transformation to obtain the distance map and apply it to find the local maxima of the connected components. Afterward, the proposed algorithm adaptively determines a minimum distance between each peak and apply it to label connected components using the watershed segmentation with eight-connectivity. On a dataset of 30 images, the test results reveal that the proposed method is more efficient and precise for the counting of overlapped flowers ignoring the degree of overlap, number of overlap, and relatively irregular shape.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.152-155
• /
• 2012

A new Saxifraga fortunei 'Pinkle' was bred by crossing 'Juno' with 'Hongoan', both with light pink (RP-N66A)-colored petals. The selection of promising lines and characterization of flowers were conducted from 2004 to 2008 year in greenhouses of the Highland Agriculture Research Center, NICS, RDA. The flowering of 'Pinkle' starts on October 7 and lasted for 27 days. The number of flowers per plant is 99.7 with many flowering habits. The flower show mixed dark pink (R-P N66C) colors at opening. The flower have 5.0 petals, each have the size is 2.9 cm in width and 3.2 cm in length. Mean plant height is 15.8 cm and number of leaves are 44.3 ea. 'Pinkle' can be used as a pot flower. Fifty percent shading of the sunlight is recommended and soft rot disease occurs caused by over-irrigation. 'Pinkle' was registered as a new cultivar in Korea Seed and Variety Service in April 2011.