• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제11권1호
• /
• pp.31-39
• /
• 2007

A pedagogic model for blood flow is introduced to help medicine majors understand a simplified version of Navier-Stokes equations which is known to be a good tool for interpreting the phenomena in blood flow. The pressure gradient consists of a time-independent part known as Hagen-Poiseuille's gradient and a time-dependent part known as Sexl's, and the model formula for the volume rate of blood flow is reduced to a very simple form. For demonstration, the blood rate in human aorta system is analyzed in connection with the time-dependence of pressure gradient. It is shown for Sexl's part that the flow rate lags the pressure gradient by ${\pi}/2$, which is thought to be due to the relaxation process involved.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.374-377
• /
• 2017

TDACS의 작동 성능 검증 시험을 수행하기 위해서 유동시험 장치를 설계하였다. 이를 위해서 고체 추진기관 연소관 및 유동시험에서의 압력 거동을 모델링하였고 각 모델의 동적 특성을 나타내는 응답 시간을 구하였다. 본 논문에서는 유동시험 장치의 시스템 응답 시간을 고체추진기관 연소관의 특성과 같아지는 조건을 구하고 이를 설계에 반영함으로써 연소 환경에서 동적 응답특성을 검증하는 것과 유사한 결과를 갖도록 하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.46-51
• /
• 1999

This paper describes the control charcteristics of thermal/flow systems. In thermal/flow systems, the transport lag plays as a dead time causing a deterioration of the controllability. Besides this, such many parameters including the temperature, pressure, and flow rate affect the system response that a control scheme which can deal with multi-input is required. Particularly in a refrigerant compressor test facility, the evaporator and condenser interact each other so that the change in the evaporator pressure cause the condenser pressure to change or vice versa. Therefore, to control the evaporator pressure, not only the cooling water flow rate in the evaporator but also the coolant flow rate in the condenser is considered. Meanwhile, the conventional PID controllers, which is suitable for a single input system, shows a large overshoot for a disturbance input. In this work, the predictive control scheme is introduced and its applicability is discussed for thermal/flow systems.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.153-159
• /
• 2002

This experimental study is aimed to increasing the velocity in the sewerage and also development of easy removal method for a corrosion and sand in the flow pipe. And the result by the increasing the out flow per unit time, diameter of sewerage pipe is becoming small size, cut down the construction fee and the same time reducing the tubulent flow pattern in the flow pipe. As a result of detected experimental velocity signal from the probe in the test wall surface, reducing the pump power and increasing the out flow unit time. Apparent water velocity decreases as the value of void ratio increases depends on the varies center of pipe.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2003년도 봄 학술발표대회논문집
• /
• pp.88-89
• /
• 2003

• 한국수자원학회논문집
• /
• 제45권6호
• /
• pp.607-616
• /
• 2012

본 연구는 AWS 관측강우정보를 이용하여 실시간 유량예측을 수행할 경우 적용가능한 예측선행시간 및 정확도를 평가하고자 하는데 그 목적이 있다. 이를 위해 남한강 상류유역을 대상유역으로 선정하였으며 2006~2009 홍수기간에 대해 SURF 모형을 구축하였다. 관측유량 자료동화 수행 유무에 따른 모의유량은 관측유량을 잘 모의하며 유효성지수를 이용하여 자료동화 효과를 분석한 결과에서 충주댐 32.08%, 달천 51.53%, 횡성 39.70%, 여주 18.23%가 개선된 것으로 나타났다. 첨두유량 발생시간 이전 가상의 현재시점까지의 AWS 관측강우정보를 이용하여 유량예측 적용성을 평가한 결과 허용오차 20% 범위 내에서 첨두유량은 충주 11시간, 달천 2시간, 횡성 3시간, 여주 5시간, 유출용적은 충주 13시간, 달천 2시간, 횡성 4시간, 여주 9시간 이내에서 예측이 가능한 것으로 나타났다. 따라서 유역의 지체효과로 인해 관측강우만을 이용하여 적정 예측시간에 대해서 실시간 첨두유량 예측이 가능할 것으로 판단된다.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.856-866
• /
• 1987

본 연구에서는 동심원관에서 기-수 이상류가 상향과 하향유동을 하는 경우에 대하여 시간평균 국부보이드율을 계측하여 확률밀도함수를 구하고, 이들로부터 통계량 인 분산도, 비대칭도계수, 첨도계수를 계산하여, 이들 값과 유동양식을 관련시켜 유동 양식의 판별기준을 정량적으로 제시하는데 목적이 있다. 또한 환상간제과 간제의 반 경방향 입치 및 유동양식에 따르는 시간평균국부보이드율의 변동을 구명하는데도 목적 을 두어 일차적으로 상향유동 경우에 대한 연구결과를 보고한다.

• 한국해양공학회지
• /
• 제37권4호
• /
• pp.137-144
• /
• 2023

This study investigates the experimental parameters of particle image velocimetry (PIV) to enhance the measurement technique for turbulent flow fields around a circular cylinder at a Reynolds number (Re) of 1.4×10⁵. At the Korea Research Institute of Ships & Ocean Engineering (KRISO), we utilized the cavitation tunnel and PIV system to capture the instantaneous flow fields and statistically obtained the mean flow fields. An aspect ratio and blockage ratio of 16.7% and 6.0%, respectively, were considered to minimize the tunnel wall effect on the cylinder wakes. The optimal values of the pulse time and the number of flow fields were determined by comparing the contours of mean streamlines, velocities, Reynolds shear stresses, and turbulent kinetic energy under their different values to ensure accurate and converged results. Based on the findings, we recommend a pulse time of 45 ㎲ corresponding to a particle moving time of 3-4 pixels, and at least 3,000 instantaneous flow fields to accurately obtain the mean flow fields. The results of the present study agree well with those of previous studies that examined the end of the subcritical flow regime.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.156-160
• /
• 2019

The changes in the dispersion of carbon black in liquid polyisoprene under shear flow with time have been investigated by time-resolved ultra small-angle X-ray scattering (USAXS) method. The analyses of USAXS profile immediately after the start of shear flow clarified that the aggregates of carbon black with a mean radius of gyration of 14 nm and surface fractal dimension of 2.5 form the fractal network structure with mass-fractal dimension of 2.9. After the application of the shear flow, the scattering intensity increases with time at the observed whole entire q region, and then the a shoulder appears at $q=0.005nm^{-1}$, indicating that the agglomerate is broken and becomes smaller by shear flow. The analysis by the Unified Guinier/Power-law approach yielded several characteristic parameters, such as the sizes of aggregate and agglomerate, mass-fractal dimension of agglomerate, and surface fractal dimension of the primary particle. While the mean radius of gyration of the agglomerate decreases with time, the mean radius of gyration of the aggregate, mass fractal dimension, and surface fractal dimension don't change with time, indicating that the aggregates peel off the surface of the agglomerate.

• 산업기술연구
• /
• 제22권A호
• /
• pp.9-17
• /
• 2002

This analysis is aimed to find out how the conditions of secondary air injection affects the residence time and the turbulence energy of flue gas and flow field in a small incinerator. A commercial code, PHOENICS, is used to simulate the flow field of an Incinerator. The computational grid system is constructed in a cartesian coordinate system In this numerical experiment, an independent numerical variable is the conditions of secondary air injection and dependants are the residence time of flue gas and the mean value of turbulence energy in a primary combustion chamber. The flow field and the distribution of turbulence energy are analysed to evaluate the residence time of flue gas and the turbulence energy The computational results say that the tangential injection of secondary air make the residence time much longer than the radial injection and that the radial injection of secondary make turbulence much stronger than the tangential injection.