• 한국수자원학회논문집
• /
• 제31권5호
• /
• pp.515-528
• /
• 1998

홍수터 흐름의 모의를 위한 준2차원 계산모형을 수립하였다. 모형의 계산망으 2차원 홍수터 구획체계를 하도와 결합한 것으로서 일반적으로 폐합형 망으로 구성된다. 홍수터 흐름에 대해서는 각 구획에서의 수량보존에 관한 연속방정식 및 인접구획간 하도형 또는 월류형 수위-유량 관계식을, 하천 본류에 대해서는 1차원 부정류에 대한 St.Venant 방정식을 각각 지배방정식으로 하여 흐름을 모의하는 준2차원 계산모형으로서, 폐합형 하천수계에 대한 부정류 해석 수치기법을 홍수터 흐름까지 포함하도록 확장함으로써 하천 본류 및 홍수터 흐름을 동시에 모의할 수 있는 수치모형을 개발하였다. 개발된 모형을 여러 검증문제에 적용하여 모형의 적용성을 조사하였으며, 각종 모형의 매개변수들에 관한 민감도 분석을 수행하였다. 흐름단면의 형상이 복잡하고 불규칙적일수록 본 모형이 Cunge(1975)의 경우보다 정확한 계산결과를 나타내었으며, 하천 본류로부터 홍수터로의 범람은 물론, 본류로의 재유입, 즉 흐름방향이 반전되는 현상이 잘 모의되었다.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.332-338
• /
• 2007

In this study the flow duration curves for Nakdong river basin are analyzed. The TANK model is used as a hydrologic simulation model whose parameters are estimated from 8-day intervals flow data measured by NIER Nakdong River Water Environment Laboratory. As a comparison result between generated natural and present river flow, the present river flow is higher than the natural river flow in the up- and mid-stream of Nakdong river, while the present river flow is lower than the natural river flow in the down stream of Nakdong river.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.717-727
• /
• 2006

The present study experimentally investigated the effect of flow direction and other flow parameters on two-phase flow distribution of refrigerants at a T-junction, and also suggested a prediction model for refrigerant in a T-junction by modifying previous model for air-water flow. R-22, R-134a, and R-410A were used as test refrigerants. As geometric parameters, the direction of the inlet or branch tube and the tube diameter ratio of branch to inlet tube were chosen. The measured data were compared with the values predicted by the models developed for air-water or steam-water mixture in the literature. We propose a modified model for application to the reduced T-junction and vertical tube orientation. Among the geometric parameters, the branch tube direction showed the biggest sensitivity to the mass flow rate ratio for the gas phase, while the inlet quality showed the biggest sensitivity to the mass flow rate ratio among the inlet flow parameters.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1271-1274
• /
• 2009

One of the landslide, Debris flow means flow mixed of rocks, gravels, sand and soil with water. Debris flow occurred in summer by passed the rainy season and typhoon. Especially, Localized heavy rain derived from abnormal weather caused debris flow independent of season. It is increase to collapse of house, bridge, roads by debris flow but countermeasure studies about occurrence cause, movement pattern, damage scale about debris flow are insufficient. This study performed debris flow model experiment using dry material and calculated shock force predicted debris flow occurrence.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.640-651
• /
• 2000

For the heat and fluid flow analyses of a parallel flow heat exchanger, an improved model considering the effect of flat tube with micro-channels is proposed. The effect of flow distribution on the thermal performance of a heat exchanger is numerically investigated. The flow distribution is examined by varying geometrical parameters, i.e., the position of the separators and the inlet/outlet, and the aspect ratio of micro-channels of the heat exchanger. The flow nonuniformities along the paths of the heat exchanger are proposed and observed to evaluate the thermal performance of the heat exchanger. The optimization using ALM method has been accomplished by minimizing the flow nonuniformity. It is found that the heat transfer rate of the optimized model is increased by 6.0% of that of the reference heat exchanger model, and the pressure drop by 0.4%

• 한국측량학회지
• /
• 제32권5호
• /
• pp.515-525
• /
• 2014

최근 기후변화로 인한 집중호우와 태풍의 증가로 산사태 및 토석류와 같은 산지토사재해가 급증하고 있다. 산지토사재해는 자연사면에서 발생하는 산사태와 토석류를 말한다. 넓은 지역에 대하여 토석류 피해범위를 예측하기 위해서는 물리적 기반의 수치해석보다는 Random Walk Model과 같은 응답모델이 적절하다. Random Walk Model은 계산방법이 간단하고 넓은 지역을 대상으로 토석류의 유동 및 퇴적 특성을 경사도의 인자로 단순화한 확률 모델이다. Random Walk Model을 이용하여 토석류 피해범위 예측을 할 수 있지만 이 모델을 적용하기 위해서는 지형조건에 맞는 초기 입력변수가 결정되어야한다. 본 연구에서는 2011년 대규모 토석류가 발생한 서울시 우면산 지역을 대상으로 현장조사 자료와 항공사진, 항공라이다 자료로부터 생성된 토석류 발생 전 후 수치표고모형의 육안판독을 통해 토석류 발생부와 퇴적부를 추출하여 Random Walk Model의 최적 변수를 산정하였다.

• 한국CDE학회논문집
• /
• 제2권1호
• /
• pp.11-18
• /
• 1997

Scientific volume visualization addresses the representation, manipulation, and rendering of volumetric data sets, providing mechanisms for looking closely into structures and understanding their complexity and dynamics. In the past several years, a tremendous amount of research and development has been directed toward algorithms and data modeling methods for a scientific data visualization. But there has been very little work on developing a mathematical volume model that feeds this visualization. Especially, in flow visualization, the volume model has long been required as a guidance to display the very large amounts of data resulting from numerical simulations. In this paper, we focus on the mathematical representation of volumetric data sets and the method of extracting meaningful information from the derived volume model. For this purpose, a B-spline volume is extended to a high dimensional trivariate model which is called as a flow visualization model in this paper. Two three-dimensional examples are presented to demonstrate the capabilities of this model.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1056-1062
• /
• 2002

This paper reports the characteristics of the three dimensional turbulent flow in the 180 degree bends with decreasing cross-sectional area by numerical method. Calculated pressure and velocity, Reynolds stress distributions are compared to the experimental data. Turbulence model employed are low Reynolds number k-epsilon model and algebraic stress model. The results show that the main vortex generated from the inlet part of the bend maintained to outlet of the bend because of the contraction of cross-sectional area. The rate of increase of turbulent kinetic energy through the bend are lower than that of mean flow. Secondary flow strength of the flow is lower about 60% than that of square duct flow.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.35-42
• /
• 2001

The characteristics of tidal circulation with the flow-control structures using the three-dimensional numerical model (POM, Princeton Ocean Model) of Chinhae Bay, Korea were investigated. To confirm th efficiencies of flow-control structures, the training wall and submerged training wall were constructed at the mouth and narrow channel in Chinhae Bay. On the basis of the present investigation, the tidal circulation induced by the construction of flow-control structures could enhance the water exchange improvement appropriately. And, th training wall at the central is more dominated than the other structures for the efficient of water exchange. The sites and types of structure and flow patterns seem to be very sensitive in tidal simulation and changes in flow fields.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.44-50
• /
• 2001

A numerical study was made to choose the better turbulence model for the flow in the discharge flow path from a diffuser to a wall. In this study standard $\kappa-\epsilon$ model(SKE), RNG $\kappa-\epsilon$ model(RNG), and Reynolds stress model(RSM) were applied. In case of the flow with relatively high Reynolds number at a diffuser inlet, the pressure loss coefficients by RNG have a tendency to be near to those by SKE at small ratio(below about 0.35) of $h/D_o$, but to those by RSM at large ratio(above about 0.35). At large ratio RNG begins to enlarge the effects of rapid strain and streamline curvature. RNG & RSM are recommended as the appropriate turbulence models for this case. But it is noticeable that the velocity gradient pattern in RNG is same as in SKE, and also that the total pressure distribution in RNG is same as in RSM only at swirling flow area, same as in SKE only at main flow area.