• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.615-620
• /
• 1997

The flow rate and the noise level of 18 cross flow fans were measured to analyze the effect of design variables on these and to finally find the optimal design value. These data were analyzed by the Taguchi method and the neural network. The optimal values obtained by the neural network showed good agreements with that by the Taguchi method. The effects of eight design variables on the fan performance and the noise were evaluated and discussed.

• 지식경영연구
• /
• 제7권2호
• /
• pp.53-68
• /
• 2006

Knowledge has become an important resource for organization. The manufacturing industry is usually operated on the basis of business processes, and most workers are familiar with their own processes. The process-based approach, therefore, can provide an efficient way to capture and navigate knowledge. In this study, we focus on knowledge which may be missed during knowledge transfer among workers. For this, we propose a method for analyzing knowledge flow, which is passed among business processes. We propose a process-based knowledge management framework for analyzing knowledge flow, which employs a two-phase analysis: process analysis and knowledge flow analysis. A knowledge flow model, represented by Knowledge Flow Diagram, is proposed as a tool for representing knowledge. We formulate several semantics for knowledge flow modeling. We build the three-level schema: conceptual, logical, and physical in order to automate the knowledge model adaptive to knowledge management systems. The proposed approach is verified and illustrated through a case study on the manufacturing process of A Company.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.603-607
• /
• 2007

Recently, the frequency of unexpecting heavy rains has been increased due to abnormal climate and extreme rainfall. There was a limit to analyze one dimension or two dimension stream flow of domestic rivers that was applied simple momentum equation and fixed energy conservation. Therefore, hydrodynamics flow analysis in rivers has been needed three dimensional numerical analysis for correct stream flow interpolation. In this study, CFD model on FLOW-3D was applied to stream flow analysis, which solves three dimension RANS(Reynolds Averaged Navier-Stokes Equation) control equation to find out physical behavior and the effect of hydraulic structures. Numerical simulation accomplished those results was compared by using turbulence models such as $k-{\backepsilon}$, RNG $k-{\backepsilon}$ and LES. Those numerical analysis results have been illustrated to bends and junctions by the turbulence energy effects, velocity of flow distributions, water level pressure distributions and eddy flows.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.472-473
• /
• 2008

Flow boiling in parallel microchannels has received attention as an effective heat sink mechanism for power-densities encountered in microelectronic equipment. the bubble dynamics coupled with boiling heat transfer in microchannels is still not well understood due to the technological difficulties in obtaining detailed measurements of microscale two-phase flows. In this study, complete numerical simulation is performed to further clarify the dynamics of flow boiling in microchannels. The level set method for tracking the liquid-vapor interface is modified to include the effects of phase change and contact angle. The method is further extended to treat the no-slip and contact angle conditions on the immersed solid. Also, the reverse flow observed during flow boiling in parallel microchannels has been investigated. Based on the numerical results, the effects of channel shape and inlet area restriction on the bubble growth, reverse flow and heat transfer are quantified.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.903-911
• /
• 2009

During the past three or four decades, the characteristics of turbulent swirling flow have been studied extensively because of their scientific and academic importance. This research deal with the periodic flow oscillation with and without swirling flow in a 180 degree circular tube using hot wire anemometry, microphone and accelerometer. The frequency regions are observed through the structured oscillation from spectrum. This work carried out to measure the sound level by using hot wire anemometry, microphone and accelerometer for each Reynolds number, $6{\times}10^4$, $8{\times}10^4$ and $1{\times}10^5$ respectively at the entry of the test tube with and without swirl flow.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.223-227
• /
• 2009

In the present study, a least square weighted residual method and Taylor-Galerkin method were formulated and tested for the discretization of the two hyperbolic type equations of level set method; advection and reinitialization equations. The two approaches were compared by solving a time reversed vortex flow and three-dimensional broken dam flow by employing a four-step splitting finite element method for the solution of the incompressible Navier-Stokes equations. From the numerical experiments, it was shown that the least square method is more accurate and conservative than Taylor-Galerkin method and both methods are approximately first order accurate when both advection and reinitialization phase are involved in the evolution of free surface.

• 한국유체기계학회 논문집
• /
• 제1권1호
• /
• pp.32-40
• /
• 1998

Aerodynamic performance of a cooling fan of driving motor was enhanced modifying the vane-shroud configuration. Performance of a target model was evaluated to obtain baseline data. The aerodynamic performance and sound pressure level were tested and measured with different numbers of vane of increased length. The tested models show high and stable performance and low values of specific noise level. The long vane-shroud structure induces more stable through flow and decreases the tip leakage flow, which contributes to the increases of performance and efficiency. The sound pressure level increases for the modified model, however, specific noise level decreases.

• 동력기계공학회지
• /
• 제13권4호
• /
• pp.31-37
• /
• 2009

The purpose of this numerical study was to investigate performance characteristics for cooling tower axial fans with sweep. Performance data for the fans with various sweep angles were obtained in terms of the setting angle at a constant flow rate. Viscous flow calculations were carried out to obtain Performance data of the total pressure rise and hydraulic efficiency. A solution of the Ffowcs Williams-Hawkings equations was used to calculate the sound pressure level at three times fan diameter away from the fan. The calculated performance data well represented performance characteristics of the cooling tower axial fan. The total pressure rise and hydraulic efficiency at the same setting angle decreased with sweep angle. Sound pressure level slightly decreased for the fan with a sweep angle of 10 degree. No significant effect of the sweep geometry was found on the sound pressure level.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.780-783
• /
• 2008

본 연구는 Manning's coefficient 와 Chezy coefficient를 이용하여 양재천 하도의 조도를 산정할 수 있는 모형을 개발하였다. 계산된 등가조도는 수위-유량자료가 없는 하천에서 수위, 유량 및 조도계수를 산정하는데 이용하였다. 조도계수는 대상구간에 대해 부정류 해석을 수행하여 유량규모별로 수위를 산정하였다. 그 결과 식생이 있을 때와 없을 때의 수위차가 1.29m 이었고, 식생밀도가 증가함에 따라 흐름저항이 크게 증가함을 알 수 있었다.

• 산업공학
• /
• 제7권3호
• /
• pp.171-180
• /
• 1994

Defined is a Multi-level Parallel Machine Flow-Shop (MPMFS) which reflects some real world manufacturing situations. Just-In-Time (JIT) philosophy is applied to the MPMFS scheduling in order to achieve lowering work-in-process inventory level as well as meeting due dates. A schedule generating simulator is developed. The latest start time of each operation is determined by a backward simulation followed by another forward simulation to analyze the schedule feasibility and actual inventory level. Reasonable schedules are available through adjusting some parameters for allowance factors such as set-up times of machines and other environmental changes. The SLAMSYSTEM under Window is employed for this processing with some input/output data handling processes devised under DOS.