• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.79-85
• /
• 2014

An air-water free surface flow simulation by using the Lattice Boltzmann Method(LBM) has not been studied a lot compared with the done by the Navier-Stoke equation. This paper shows the LBM is as one of the application tools for the free surface movement over an obstacle. The Mezo scaled application tool has been developed with two dimensional and nine discretized velocity direction using conventional lattice Bhatnagar-Gross-Krook model. Boundary conditions of a halfway-based for solid wall and a kinematic-based for interface are adopted. A validation case with a trapezoidal shape bump to make a comparison between freesurface movements from computational results and experimental ones was described with grid size dependency.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.152-155
• /
• 2008

In this paper, the effect of modification of geometric variables on the performance of a centrifugal compressor blade has been studied numerically. The compressor contains six main blades and six splitter blades. Reynolds averaged Navier-Stokes (RANS) equations with shear stress turbulence (SST) model are discretized by finite volume approximations and solved on hexahedral grids for flow analysis. The design variables from blade lean angle at tip and middle of the blade have been modified. The isentropic blade efficiency and pressure have been predicted with the variation of the variables. Frozen rotor simulation is performed and adiabatic wall condition has been used. One of the six blades of compressor has been used for simulation to reduce the computational load. Optimum number of meshes has been selected by grid-dependency test, and this is used for all the simulations with changing geometric variables. The detailed flow analysis results have been reported as well as the effects of the variables.

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.90-97
• /
• 2004

Flow mechanism of contractive and dilative motion is numerically investigated to obtain a propulsive force in highly viscous fluid. An axisymmetric code is developed with unstructured grid system based on cell-centered scheme. It is validated by comparing with the results of Stokes approximation for the problem of uniform flow past a sphere in low Reynolds number(R$_{n}$=1). The validated code is applied to the simulation of contractive and dilative periodic motion of body whose results are quantitatively compared with the two dimensional case. In order to investigate the grid dependency, two different grids are applied to the present computations. The present study provides key information for the development of an axisymmetric Micro-hydro-robot.t.

• 전자공학회논문지A
• /
• 제32A권7호
• /
• pp.104-114
• /
• 1995

In this paper, an intermediate representation HSFG(Hanyang Sequential Flow GRaph) and a new scheduling algorithm for the control-dominated ASIC design is presented. The HSFG represents control flow, data dependency and such constraints as resource constraints and timing constraints. The scheduling algorithm minimizes the total operating time by reducing the number of the constraints as maximal as possible, searching a few paths among all the paths produced by conditional branches. The constraints are substitute by subgraphs, and then the number of subgraphs (that is the number kof the constraints) is minimized by using the inclusion and overlap relation among subgraphs. The proposed algorithm has achieved the better results than the previous ones on the benchmark data.

• 대한기계학회논문집B
• /
• 제31권12호
• /
• pp.1017-1023
• /
• 2007

This study is intended to analyze the effect of thin ink-film thickness around rotating printing roll on the printing quality in the gravure printing process which is used for making electronics circuit like a RFID tag with a conductive ink. The present work numerically estimates the film thickness around rotating roller partially immersed in ink for which the volume of fluid (VOF) method was adopted to figure out the film formation process around rotating roller. Parameter studies were performed to compare the effect of ink properties (viscosity, surface tension), operating condition (roller rotating speed, initial immersed angle) on the film thickness. The result indicates that the film thickness has a strong dependency on the rotating speed, while the surface tension has negligible effect.

• KSBB Journal
• /
• 제10권5호
• /
• pp.547-552
• /
• 1995

Some functional and rheological properties of the ${\gamma}$-polyglutamic acid(${\gamma}$-PGA) produced from alkalophilic Alcaligenes sp. were investigated. Viscosity synergism with thickening agents, capacities for gelling, entrapig of heavy metals, and flocculability of ${\gamma}$-PGA were not observed, but the relatively good compatability with various polyvalent metallic ins, excellent absorption ability and spinability were observed. The ${\gamma}$-PGA solution showed non-Newtonian flow behavior and exhibited pseudoplastic property with a yield stress at above 1% concentration. The values of flow index for 1% solution were in the range of 0.41∼0.75 showing shear rate dependency and the value of yield stress was 2.28 Pa. The value of consistency index was 0.868 Pa$.$Sn and was exponentially dependent on concentration.

• 생태와환경
• /
• 제36권3호통권104호
• /
• pp.336-343
• /
• 2003

본 연구에서는 남, 북한강 그리고 경안천으로부터 팔당호에 유입되는 유기물 및 영양물질농도의 연속성 예측을 위하여 단순로그선형모델과 다변수 로그선형모델이 함께 적용되었으며, F-검정과 결정계수에 기초하여 산정된 모델의 유의성과 유효성이 검토되었다. 검토 결과 단순로그선형모델은 산정된 9개의 모델 중 4개 모델만이 통계적으로 유의한 반면 다변수 로그선형모델의 경우에는 9개 모델 모두 통계적으로 유의한 것으로 나타났다. 모델의 유효성을 평가하는 결정계수 또한 다변수 로그선형모델의 경우에 더 높게 예측되었다. 즉 팔당호 유입 수질 농도의 연속성 예측과 경향성 파악을 위해서는 다변수 로그선형모델의 적용이 더 적합한 것으로 판단되었다. 다변수 로그선형모델 결과에 기초하여 팔당호 유입수질의 유량 의존성, 경향성, 계절성을 분석하였다. 분석결과 모든 지류에서 유량이 증가함에 따라 팔당호로 유입되는 BOD 농도는 감소하는 것으로 나타났으며, TN과 TP의 경우에는 BOD와 달리 유량이 증가하더라도 농포는 증가 또는 감소하지 않는 것으로 나타났다. 따라서 3개 지류 유역에서 유기물을 배출하는 주요 오염원은 점오염원인 반면 영양물질의 경우에는 점오염원 뿐만 아니라 비점오염원 역시 주요 배출원으로 작용하고 있는 것으로 판단된다. 경향성을 분석한 결과 1995턴부터2000년까지 모든 지류에서 팔당호로 유입되는 BOD농도의 증감 경향은 보이지 않았다. 남한강과 북한강으로부터 팔당호로 유입되는 TP의 경우 1988년부터 1994년까지 점진적인 증가 추세를 보이는 것으로 보고된 바 있으나 본 연구의 대상 기간인 1995년 이후에는 이러한 증가 추세는 관찰되지 않았으며, 반면 경안천으로부터 유입되는 TP농도는 연간 10%정도 증가하고 있는 것으로 예측되었다. 한편 북한강으로부터 팔당호로 유입되는 TN농도는 연간 10%정도 감소하는 반면 남한강과 경안천으로부터의 유입 농도는 각각 연간 3%와 7%씩 증가하는 경향을 보였다. 수질 농도의 계절별 변화 경향을 분석한 결과 팔당호로 유입되는 3개 지류의 유기물 및 영양물질 농도는 모두 계절성을 갖는 것으로 분석되었으며, 이 중 가장 작은 변동폭을 갖는 수질항목은 총 질소인 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.12-20
• /
• 1998

Exter ballistics of a typical high-speed projectile is studied through a flow-visualization experiment and an unstructured grid Navier-Srokes computation. Experiment produced a schlieren photograph that adequately shows the characteristic features of this complex flow, namely two kinds of oblique cone shocks and turbulent wake developing into the downstream. A hybrid scheme of finite volume-element method is used to simulate the compressible Reynolds-Averaged Navier-Stok- es solution on unstructured grids. Osher's approximate Riemann solver is used to discretize the cinvection term. Higher-order spatial accuracy is obtained by MUSCL extension and van Albada ty- pe flux limiter is used to stabilize the numerical oscillation near the solution discontinuity. Accurate Gakerkin method is used to discretize the viscous term. Explict fourth-order Runge-Kutta method is used for the time-stepping, which simplifies the application of MUSCL extension. A two-layer k-$\varepsilon$ turbulence model is used to simulate the turbulent wakes accurately. Axisymmetric folw and two-dimensional flow with an angle of attack have been computed. Grid-dependency is also checked by carrying out the computation with doubled meshes. 2-D calculation shows that effect of angle of attack on the flow field is negligible. Axi-symmetric results of the computation agrees well with the flow visualization. Primary oblique shock is represented within 2-3 meshes in numerical results, and the varicose mode of the vortex shedding is clearly captured in the turbulent wake region.

• 한국항공우주학회지
• /
• 제47권1호
• /
• pp.17-25
• /
• 2019

항공기의 Intake는 공간적 제약 또는 생존성 확보의 이유로 S형태의 곡률을 갖는 덕트를 가진다. 그러나 덕트의 곡률은 2차유동과 유동박리의 발생을 야기하며 불균일한 압력분포 생성의 원인이 된다. 본 연구에서는 RAE M 2129 S-Duct의 형상에 보조 Duct를 적용하여 경계층 흡입을 수행하였다. 경계층 흡입의 위치와 각도를 설계변수로 설정하였으며, 흡입면에서 동일 유량을 흡입하는 조건을 부여하였다. S-Duct의 전산해석 타당성을 검증하기 위하여 Port Side와 Starboard Side의 무차원 압력 분포를 ARA 실험값, 전산해석 값과 각각 비교하여 확인하였다. 본 연구에서는 유동 왜곡을 판단하는 공기역학적 성능인자로 유동 왜곡 계수를 사용 하였으며, 경계층 흡입에 의한 유동박리, 와류, 유량 분포 및 압력 분포를 비교 분석 하였다. 그 결과 경계층 흡입 적용 이전과 비교하여 최대 26.14%의 유동 왜곡 계수 저감 효과를 확인하였다.

• Korea-Australia Rheology Journal
• /
• 제15권1호
• /
• pp.35-41
• /
• 2003

It is expected that particle size distribution of any portion obtained through screening, is of more uniform than that of the original mixture, typically following such as log-normal, Rosin-Rammler distributions and so on. In this study, therefore, a new relation between parameters of the uniform distribution and flow characteristics of the coarse particle suspensions is derived based on the continuous polydisperse model (Ookawara and Ogawa, 2002b), which is derived from the discrete polydisperse model (Ookawara and Ogawa,2002a). The derived model equation predicts a linear increase of viscosity with shear rate, viz., dilutant flow characteristics. Further, the increase of viscosity is expected to be proportional to the square of volume fraction of particles, and to show the linear dependency on density and average diameter of particles. It is also shown that the uniform distribution model includes additional term that expresses the effect of distribution width. For verification of the model, the experimental results of Clarke (1967) are cited as well as in our previous work for the monodisperse model (Ookawara and Ogawa,2000) since most parameters were varied independently in his work. It is suggested that the newly introduced term expands the applicable range compared with the monodisperse model.