• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.57-64
• /
• 2002

The structure of conventional CAM(Content Addressable Memory) cell, used to Look-up table scheme in Huffman CODEC, is not performed by being separated in reading, writing and match operation. So, there is disadvantages that the control is complicated, and the floating states of match line force wrong operation to be happened in reading, writing operation. In this paper, in order to improve the disadvantages and proces the data fast, fast Look-up table is designed using DBLCAM(Dual Bit Line CAM)-performing the reading, writing operation and match operation independently and Two-port SRAM being more fast than RAM in an access speed. Look-up table scheme in Huffman CODEC, using DBLCAM and Two-port SRAM proposed in this paper, is designed in Cadence tool, and layout is performed in 0.6${\mu}{\textrm}{m}$ 2-poly 3-metal CMOS full custom. And simulation is peformed with Hspice.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.111-116
• /
• 2008

Collapsed perflurostearic acid (PFS) films were prepared on the different pH and the various metal ion ($Na^+$, $Ca^{2+}$, $La^{3+}$) containing subphase using Langmuir-Blodgett (LB) trough. The degree of ionization of collapsed PFS film formed from floating monolayer has been determined by Fourier transform infrared (FTIR) spectroscopy. The intensity of C = O of -COOH peaks of collapsed PFS decreased with increasing pH of subphase. The order of ionization of collapsed PFS on the subphase of the same pH was $La^{3+}$ > $Ca^{2+}$ > $Na^+$. The degree of ionization of collapsed PFS on the Deionized (D.I.) water subphase is above 50% even at subpahse pH 3, which is much higher degree of ionization than that of stearic acid.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2012

In this paper, matching characteristic of MIM (metal-insulator-metal) capacitor with $Al_2O_3/HfO_2/Al_2O_3$ (AHA) structure is analyzed. The floating gate capacitance measurement technique (FGMT) was used for analysis of matching characteristic of the MIM capacitors in depth. It was shown that matching coefficient of AHA MIM capacitor is 0.331%${\mu}m$ which is appropriate for application to analog/RF integrated circuits. It was also shown that the matching coefficient has a more strong dependence on the width than length of MIM capacitor.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.328-335
• /
• 2010

We have designed and fabricated an active pixel sensor(APS) using an optimized n-well/gate-tied p-channel metal oxide semiconductor field effect transistor(PMOSFET)-type photodetector with a built-in transfer gate. This photodetector has a floating gate connected to n-well and a built-in transfer gate. The photodetector has been optimized by changing the length of the transfer gate. The APS has been fabricated using a 0.35 ${\mu}m$ standard complementary metal oxide semiconductor(CMOS) process. It was confirmed that the proposed APS has a wider dynamic range than the APS using the previously proposed photodetector and a higher sensitivity than the conventional APS using a p-n junction photodiode.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.515-520
• /
• 2012

In this review, the fabrication of silicon based memory capacitor and organic memory thin film transistors (TFTs) was discussed for their potential identification tag applications and biosensor applications. Metal or non-metal nanoparticles (NPs) could be capped with chemicals or biomolecules such as protein and oligo-DNA, and also be self-assembly monolayered on corresponding target biomolecules conjugated dielectric layers. The monolayered NPs were formed to be charging elements of a nano floating gate layer as forming organic memody deivces. In particular, the strong and selective binding events of the NPs through biomolecular interactions exhibited effective electrostatic phenomena in memory capacitors and TFTs formats. In addition, memory devices fabricated as organic thin film transistors (OTFTs) have been intensively introduced to facilitate organic electronics era on flexible substrates. The memory OTFTs could be applicable eventually to the development of new conceptual devices.

• Journal of Environmental Impact Assessment
• /
• v.28 no.5
• /
• pp.492-506
• /
• 2019

Heavy metal contaminants in the shooting range are mostly present in a warhead circle or a metal fragment present as a particle, these fine metal particles are weathered for a long period of time is very likely that the surface is present as an oxide or carbon oxide. In particular, lead which is a representative contaminant in the shooting range soil, is present as more fine particles because it increases the softness and is stretched well. Therefore, by physical washing experiment, we conducted a degree analysis, concentration of heavy metals by cubic diameter, composition analysis of metallic substances, and assessment of applicability of gravity, magnetism and floating selection. The experimental results FESEM analysis and the measurement results lead to the micro-balance was confirmed thatthe weight goes outless than the soil ofthe same size in a thinly sliced and side-shaped structure according to the dull characteristics it was confirmed that the high specific gravity applicability. In addition, the remediation efficiency evaluation results using a hydrocyclone applied to this showed a cumulative remediation efficiency of 71%,twice 80%, 3 times 91%. On the other hand, magnetic sifting showed a low efficiency of 17%,floating selection -35mesh (0.5mm)target soil showed a relatively high efficiency to 39% -10mesh (2mm) efficiency was only 16%. The target treatment diameter of soil washing should be 2mm to 0.075mm, which is applied to the actual equipment by adding an additional input classification, which would require management as additional installation costs and processes are constructed. As a result, it is found that the soilremediation of shooting range can be separately according to the size of the warhead. The size is larger than the gravel diameter to most 5.56mm, so it is possible to select a specific gravity using a high gravity. However, the contaminants present in the metal fragments were found to be processed by separating using a hydrocyclone of the soil washing according to the weight is less than the soil of the same particle size in a thinly fragmented structure.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.237-245
• /
• 2021

Particulate matter and ultra-particle matters generally refer to very small floating dust, such as 1/6 to 1/7 and 1/20 to 1/30, respectively, compared to the thickness of human hair, and contain various types of heavy metal ions. In addition to breathing, particle matters (PM) that flows in through the gaps in the pores of the skin can induce health problems in the body's tissues and skin, so it must be removed by blocking the inflow or by washing. Through this study, we confirmed the possibility that heavy metal ions can be adsorbed and removed by using Oryza sativa (Rice) bran oil (OSBO). In addition, the cell viability is much higher than that of grain-derived components through cytotoxicity experiments, and the cytoprotective effect of an external stimulus source can be expected. It was confirmed that the expression amount of COL1A1 mRNA increased, and accordingly, it was believed that wrinkles that might be caused by moisture lost by heavy metal ions in fine dust could be alleviated. Based on the results of these experiments, we tried to present a cosmetics containing OSBO, which is a wash-off formulation, in order to finally remove heavy metals.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.482-485
• /
• 2004

We fabricated a hybrid bulk/fully depleted silicon on insulator (FDSOI) complementary metal oxide semiconductor (CMOS) active pixel image sensor. The active pixel is comprised of reset and source follower transistors on the SOI seed wafer, while the pinned photodiode and readout gate and floating diffusion are fabricated on the SOI handle wafer after the removal of the buried oxide. The source of dark current is eliminated by hybrid bulk/FDSOI pixel structure between localized oxidation of silicon (LOCOS) and photodiode(PD). By using the low noise hybrid pixel structure, dark currents qm be suppressed significantly. The pinned photodiode can also be optimized for quantum efficiency and reduce the noise of dark current. The spectral response of the pinned photodiode on the SOI handle wafer is very flat between 400 nm and 700 nm and the dark current that is higher than desired is about 10 nA/cm2 at a $V_{DD}$ of 2 V.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.3
• /
• pp.164-168
• /
• 2016

A low insertion-loss, high-isolation switch based on single pole double throw (SPDT) for a 2.4GHz Bluetooth low-energy transceiver is presented in this paper. In order to increase isolation, the body floating technique is implemented. Based on characteristics whereby the ratio of the sizes of the shunt and the series transistors significantly affect the performance of the switches, the device sizes are optimized. A simple matching network is also designed to enhance the insertion loss. Thus, the SPDT switch has high isolation and low insertion loss without increasing the complexity of the circuit. The proposed SPDT is designed and simulated in a complementary metal-oxide semiconductor 65nm process. The switch has a $530{\mu}m{\times}270{\mu}m$ area and achieves 0.9dB, 1.78dB insertion loss and 40dB, 41dB isolation of transmission, reception modes, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2013

In this paper, a biosensor based on a gated lateral bipolar junction transistor (BJT) is proposed. The gated lateral BJT can function as both a metal-oxide-semiconductor field-effect transistor (MOSFET) and a BJT. By using the self-assembled monolayer (SAM) method, the C-reactive protein antibodies were immobilized on the floating gate of the device as the sensing membrane. Through the experiments, the characteristics of the biosensor were analyzed in this study. According to the results, it is indicated that the gated lateral BJT device can be successfully applied as a biosensor. Additionally, we found that the sensitivity of the gated lateral BJT can be varied by adjusting the emitter (source) bias.