• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.499-505
• /
• 2004

A Propulsion System of the CRW(Canard Rotor Wing) type UAV(Unmanned Aerial Vehicle) was composed of the turbojet engine to generate the propulsive exhaust gas, and the duct system including straight bent ducts, tip-jet nozzles, a master valve and a variable main nozzle for three flight modes such as lift/landing mode, low speed transition flight mode and high speed forward flight mode. In this study, in order to operate safely the propulsion system, the dynamic Performance behavior of the system was modeled and simulated using the SIMULIN $K^{ }$, which is the user-friendly GUI type dynamic analysis tool provided by MATLA $B^{ }$. In the transient performance model, the inter-component volume model was used. The performance analysis using the developed models was performed at various flight condition, valve angle positions and fuel flow schedules, and these results could set the safe flight mode transition region to satisfy the inlet temperature overshoot limitation as well as the compressor surge margin. Performance analysis results using the SIMULIN $K^{ }$ performance program were compared with them using the commercial program GSP.m GSP.

• 한국추진공학회지
• /
• 제17권4호
• /
• pp.49-55
• /
• 2013

한국항공우주연구원 (이하 항우연)에서 개발중인 중형 전기동력 무인기 EAV2의 추진시스템에 대한 비행시험결과에 대하여 기술 하였다. EAV2는 날개 길이 6.9 m, 무게 18 kg의 저속 장기 체공형 무인기이다. 전기 동력원으로는 태양전지, 연료전지, 배터리의 세 가지를 동시에 사용한다. EAV2는 2012년 6월에 22시간 이상 체공 비행에 성공하였다. 시험 결과, 전기추진 시스템은 비행 중 일어나는 여러 상황에서 필요한 동력을 성공적으로 공급하였으며, 각 동력원들은 설계된 목적에 부합하게 작동되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.28-33
• /
• 2001

Screw conveyors are used extensively in industrial for conveying and elevating materials. Despite their apparent simplicity, the mechanics of the conveying action is very complex. so many engineers depend on experiential data. Capacities of screw are pumping, steady flow of polymer melts, steady volumetric throughput etc. they are affected by geometry of screw, heat flux, pressure on inside barrel, rotating velocity, friction coefficient at screw surface etc. by computation volumetric efficiency increases as rotating velocity increases and decreases as friction coefficient increases. also it decreases with short pitch length. and double flight screw is more effective than single flight screw. The temperature of polymer melts by heating pad and injection pressure play a very important role in the injection molding machine. so in this paper we analyze thermal distortion and stress of screw includes pressure and temperature distributions by finite element analysis to understand what design factors influence on volumetric throughput efficiency of the screw and thermo-mechanical characteristics of screw.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.219-224
• /
• 2005

본 연구는 CRW형식 무인항공기 추진시스템의 밸브 작동을 고려한 비행모드에 따른 천이성능특성을 파악하기 위해 SIMULINK를 이용하여 모델링 하였다. 주 엔진시스템의 천이모사에는 ICV 방법이 적용되였다. 그리고 밸브 시스템은 로터리 덕트와 메인 덕트로 빠져나가는 유량을 제어하는 시스템으로서 밸브를 통해 로터리 덕트로 빠져나가는 유량과 메인 덕트를 빠져나가는 유량이 합은 터빈의 출구 유량과 같다는 가정하에 수행 되었으며, 이때 밸브각 변화에 따른 손실, 유량 및 유효 면적 등이 고려되었다. 성능해석은 비행 천이 영역인 고도 1Km 비행 마하수 0.1에서 엔진최대회전수시 회전익 모드에서 고정익 모드로 변환시외 고정익 모드에서 회전익 모드로 변환 경우들이 수행되였다.

• 한국추진공학회지
• /
• 제9권3호
• /
• pp.127-132
• /
• 2005

본 연구는 CRW형식 무인항공기 추진시스템의 밸브 작동을 고려한 비행모드에 따른 천이 성능 특성을 파악하기 위해 SIMULINK를 이용하여 모델링 하였다 그리고 밸브 시스템은 로터리 덕트와 메인덕트로 빠져나가는 유량을 제어하는 시스템으로서 밸브를 통해 로터리 덕트로 빠져나가는 유량과 메인덕트를 빠져나가는 유량의 합은 터빈의 출구 유량과 같다는 가정 하에 수행되었으며, 이때 밸브 각 변화에 따른 손실, 유량 및 유효 면적 등이 고려되었다. 성능 해석은 비행 천이 영역인 고도 1km 비행 마하수 0.1에서 엔진 최대회전수시 회전익 모드에서 고정익 모드로 변환되는 경우와 고정익모드에서 회전익 모드로의 변환되는 경우들이 수행되었다.

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.16-27
• /
• 2020

넓은 비행영역에서 스크램제트 엔진의 운용을 위해, 비행 조건의 변화에도 안정적인 성능을 나타내는 흡입구의 설계가 중요하다. 본 연구에서는 마하수 4~6, 받음각 -6도~6도의 넓은 비행영역에서 안정적인 성능을 얻기 위한 2D 고정형 흡입구의 설계 방법에 대한 연구를 수행하였다. 설계 방법 및 설계 주안점에 대해 제시한 후, 넓은 비행영역에서 높은 전압력 회복율과 유량 포획율을 갖는 흡입구를 설계함에 있어 가장 중요한 설계요소인 초기 압축각도와 비행 마하수 설계점에 따른 성능예측 및 분석을 수행하였다. 분석 결과를 바탕으로 넓은 비행영역에서 안정적인 성능을 나타내기 위한 두 가지 주요 설계요소의 선정기준을 제시하였다.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.405-408
• /
• 1998

Generally, the principle function of simulator control loading system is to provide the pilot or student with the "feel" of the actual aircraft flight control systems during flight, taxing, and in malfunction. Flight control "feel" is the resistance felt by the pilot when moving a control stick or pedal, coupled with the amount of control surface deflection, and hence aircraft response, resulting from the input. Therefore, the control loading servo must be capable of performing to some general list of requirements derived from real aircraft control forces. In this paper, we deal with a $\mu-controller$ design for a control loading system of the flight simulator. For this, we derive a frequency response of the hydraulic system from the identification data and then design a controller using a $\mu-synthesis$ method. Under the same condition of simulation, $\mu-controller$ provides the superior performance than PID controller.than PID controller.

• 품질경영학회지
• /
• 제31권4호
• /
• pp.95-116
• /
• 2003

The primary purpose of this paper is to determine the impact of shared values, conflicts and balanced power that reside in the relationships between airline maintenance engineers and pilots who are considered to be core components in operating aircraft. According to the analysis, the higher the shared values, the lower the conflicts, and the more balanced power between those two parties, the higher the mutual trust and job satisfaction levels. It was also found that the quality of flight operation changes depending on the mutual trust and job satisfaction levels. These results clearly show that the quality of flight operation is directly related to the interactions among two parties and feelings for each other in an environment where mutual dependencies are highly required.

• 대한산업공학회지
• /
• 제11권2호
• /
• pp.155-163
• /
• 1985

This paper presents a heuristic algorithm for a multidepot aircraft scheduling and crew scheduling with deal-head flights. This algorithm is extended from a Greedy heuristic algorithm for a multi-depot multi-salesman traveling salesman problem. We first transform a given flight schedule into a multi-depot multi-traveling salesman problem, considering aircraft flight policies and crew management constraints. Then we solve this problem by applying a modified Greedy heuristic algorithm.