• 대한전자공학회논문지SP
• /
• 제42권2호
• /
• pp.9-18
• /
• 2005

Flicker 란 인체가 느끼는 빛과 색상의 변화이다. 이런 변화는 일반적으로 일정하지 않으며 시간이 변함에 따라 변한다. 이는 눈의 피로와 두통을 일으키는 원인이 된다. Flicker 현상은 PDP를 포함하는 많은 display에 존재하며 특히 50Hz로 동작 하는 PDP의 경우에 심각한 문제를 발생시킨다. Flicker를 감소하기 위해서 많은 연구가 진행되었지만 Flicker에 대한 객관적인 정의를 내리기 어렵기 때문에 flicker에 대한 객관적인 측정방법이 필요하며 이는 display 화질 향상에 큰 도움이 될 것이다. 본 논문에서는 luminance flicker를 측정하는 수학적인 모델을 제안한다. 이 모델을 통하여 flicker가 생길 확률에 대한 정량적인 결과를 보여준다. vision 분야의 최근의 연구와 고전적인 연구결과를 적용하여 모델을 구축하였으며 인체의 눈의 임시 민감도에 초점을 맞추었다. 본 연구를 통하여 flicker-free한 PDP 개발을 위한 실제적인 툴을 만들 수 있을 것이다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.179-193
• /
• 2016

In power quality monitoring, voltage fluctuation is one of the power quality problems, which cause light flickers. To determine the flicker severity, the flicker meter concept was developed in an IEC 61000-4-15 standard. Generally, voltage fluctuations are described as an amplitude modulation(AM). The flicker meter of IEC 61000-4-15 as an international standard for flicker measurement recommends square demodulation method to detect flicker signals from voltage fluctuation signals. This paper suggests a new effective method using filter bank to detect and estimate flicker signals, which do not need square demodulation. For the accurate detection of flicker signals, the filter bank is designed with a full consideration of the spectrum characteristics of voltage fluctuation signals described as AM. The frequency and magnitude of the detected flicker signals are estimated using recursive method. Computer simulations were performed on synthesized signals to prove validity of the proposed method.

• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.707-714
• /
• 2000

본 논문에서는 PLL 시스템의 보다 실제적 분석 모델인 3차 시스템을 통하여 저주파 대역에서 문제가 되는 flicker noise가 어떠한 양상을 나타내는가를 알아보려 한다. 3차에서 해석의 복잡성으로 수학적인 분석이 난해하지만 최적화 된 2차 필터를 통한 pseudo-damping factor의 도입으로 3차 시스템에서의 flicker variance의 해석이 용이하도록 시도하였다. 3차에서의 flicker variance의 수식적인 유도를 보이고 이를 2차 시스템에서 발생되는 flicker noise에 대한 variance와 비교하려 한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.391-393
• /
• 2005

This paper studies flicker evaluation considering power quality disturbance. A flicker problem with light device irritates human's eyes. Also, the flicker problem has an influence on adverse effect such as rolling device and rotating device. However, a study of flicker evaluation is not complete. A flicker is measured and evaluated at monitoring point. But we consider power quality disturbances such as voltage sag and transient that cause fault and inverter/breaker switching. Power quality disturbances affects flicker evaluation. A flicker evaluation index increases. Therefore, we consider power quality disturbances. We detect voltage sag and transient using wavelet and evaluate flicker without flicker index including power quality disturbances.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.230-235
• /
• 1999

본 논문에서는 PLL 시스템의 보다 실제적인 모델인 3차 시스템을 통하여 저주파 대역에서 문제가 되는 flicker noise가 어떠한 양상을 나타내는가를 알아보려 한다. 3차에서 해석의 복잡성으로 그 수학적 분석의 난해함을 나타내지만 최적화 된 2차 필터를 통한 pseudo -damping factor의 도입으로 전체적인 flicker variance의 해석이 용이하도록 시도하였다. 3차에서의 flicker variance의 수식적인 유도를 보이고 이를 2차 시스템에서 발생되는 flicker noise 에 대한 variance와 비교 하려한다

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.376-379
• /
• 2006

This paper studies flicker evaluation considering power quality disturbance. A flicker problem with light device irritates human's eyes. Also, the flicker problem has an influence on adverse effect such as rolling device and rotating device. However, a study of flicker evaluation is not complete. A flicker is measured and evaluated at monitoring point. But we consider power qualify disturbances such as voltage sag and transient that cause fault and inverter/breaker switching. Power quality disturbances affects flicker evaluation. A flicker evaluation index increases. Therefore, we consider power quality disturbances. We detect voltage sag and transient using wavelet and evaluate flicker without flicker index including power quality disturbances.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.95-97
• /
• 2007

Large area flicker is one of the most annoying image defects, and it is an inherent characteristic of impulsively driven displays such as CRTs. Recently, LCDs have also adopted impulsive driving methods for improved motion picture quality, therefore LCDs can also show large area flicker. Existing metrics do not account for the non-linearity of human brightness perception. This paper presents an improved large area flicker metric to more accurately quantify large area display flicker performance.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1663-1667
• /
• 2011

Voltage variation caused by large loads such as arc furnace and large motors, which use the large and instantaneous currents, can cause the voltage flicker. The flicker irritates the human's eyes and also has an adverse effect on protection device, rotating machine and electronic device etc, therefore the flicker needs to be managed effectively. Recently, the Korea power quality standard has been established on the IEC standards. This paper presents the flicker management standard for distribution power system and suggests the flicker transfer coefficients for Korea power system based on the IEC 61000-3-7.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1017-1024
• /
• 2017

The International Electrotechnical Commission(IEC) 61000-4-15 is a standard proposing techniques for a flicker meter test and measurement method. The IEC61000-4-15 ed1 announced in 1997 was not include tests for accurate verification. Also it was not explained flicker meter algorithm that can be directly applied to the other power systems. But the new edition of IEC61000-4-15 ed2 prescribes a variety of tests for verify flicker meter algorithm and it explains 'correction factor' used for measuring flicker in other power systems. It can measure flicker severity in 220V system by multiplying correction factor to the measured values with the 230V algorithm. This paper compared the method of measuring flicker severity in korea power system using the correction factor and the modified weighting filter, after verifying of digital flicker meter algorithm created by using matlab based on IEC61000-4-15 ed2.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.8-14
• /
• 2008

This paper studies a more exact flicker evaluation method by detecting power quality disturbances and excluding the effects of power quality disturbances. Up to the present, power quality disturbances affect flicker evaluation index because power quality problems do not have been considered. However, flick index should represent only flicker without power quality disturbances. Thus, in this paper, we present the improved flicker evaluation method which removing the effects of power quality disturbances such as voltage sag and transient caused by fault and inverter/breaker switching. We detect voltage sag and transient using wavelet transform and remove the effects of power quality disturbances from flicker index.