• Structural Engineering and Mechanics
• /
• 제18권4호
• /
• pp.493-516
• /
• 2004

This paper addresses the behavior and strength of structural walls with a concrete compressive strength exceeding 69 MPa. This information also enhances the current database for improvement of design recommendations. The objectives of this investigation are to study the effect of axial-load ratio on seismic behavior of high-strength concrete flexural walls. An analysis has been carried out in order to assess the contribution of deformation components, i.e., flexural, diagonal shear, and sliding shear on total displacement. The results from the analysis are then utilized to evaluate the prevailing inelastic deformation mode in each of wall. Moment-curvature characteristics, ductility and damage index are quantified and discussed in relation with axial stress levels. Experimental results show that axial-load ratio have a significant effect on the flexural strength, failure mode, deformation characteristics and ductility of high-strength concrete structural walls.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.427-434
• /
• 2005

본 연구에서는 실리케이트계 급결제, 알루미네이트계 급결제, 시멘트 광물계 급결제를 사용하여 모르타르의 응결시간과 압축 강도를 실내시험하고, 현장에서 제작된 공시체로 숏크리트의 압축강도, 휨 강도, 휨 인성 및 리바운드율 시험을 시행하여, 급결제가 숏크리트에 미치는 응결, 강도, 시공성을 비교 검토하고, 특히 시멘트광물계 급결제의 성능을 평가하였다 급결제 종류별로 비교한 압축강도의 값은 각 재령별로 숏크리트의 강도 기준에는 적합하였으나 재령 28일의 강도비 $75\%$ 이상의 규정에는 시멘트광물계만이 $87\%$로 규격에 적합하였다. 휨강도시험 결과는 강섬유 숏크리트에 대한 기준에 시멘트광물계는 모든 적합하였으나 알루미네이트계는 재령 28일에서만 기준치에 적합하였으며, 실리케이트계는 모든 기준에 미흡하였으며, 휨 인성 실험결과 한국도로공사 기준에 시멘트광물계와 알루미네이트계는 규정값에 적합하였으나, 실리케이트계는 이기준에 미흡하였다 리바운드율 시험결과는 대체로 $11{\~}19\%$사이였으며, 시멘트광물계 급결제를 사용한 쪽이 알루미네이트계와 실리케이트계 급결제를 사용한 것보다 $2{\~}3\%$ 정도 작게 나타났다. 시멘트광물계 급결제는 초기의 높은 강도와 함께 종래의 급결제가 가지는 장기강도 저감을 극복하고 고강도화 됨으로써 고성능 숏크리트의 품질확보 가능성을 확인할 수 있었다.

• 폴리머
• /
• 제36권2호
• /
• pp.208-215
• /
• 2012

콘크리트 제조 시 사용되는 잉여수를 지연 흡수시키기 위하여 역유화중합법으로 중합된 가교 poly(sodium acrylate)(cPSA)를 ethylene glycol dimethacrylate(EGDMA) 5, 10 및 20 g을 사용하여 표면 가교시켰다. 표면 가교제 첨가량이 다른 cPSA-EGDMA를 시멘트 질량의 0.5, 1.0 및 1.5 wt% 각각 첨가하여 모르타르의 압축 및 휨강도를 측정하였다. 그 결과 cPSA-EGDMA(20 g)을 0.5 wt% 첨가한 모르타르의 압축강도는 무첨가 시멘트에 비하여 낮게 나타났으나 다른 cPSA-EGDMA 첨가 모르타르는 높게 나타났다. 그 중 특히 cPSA-EGDMA(5 g)을 1.0 wt% 첨가한 모르타르는 무첨가 모르타르의 압축강도(26.8 MPa)와 휨강도(2.52 MPa)와 비교하면 압축강도는 약 16%, 휨강도는 약 10% 증가로 가장 높게 나타났다. 그리고 공극률이 압축강도와 휨강도에 미치는 영향을 측정하기 위하여, 이들 모르타르의 FE-SEM 분석 및 porosity를 측정하였다. FE-EM 분석결과 팽윤된 cPSA-EGDMA(5 g)이 칼슘 실리케이트 수화물(C-S-H) 결정들 사이를 채우고 있는 것으로 확인되었다. cPSA-EGDMA를 첨가한 모르타르의 porosity 측정결과 무첨가 시멘트 모르타르에 비하여 모두 낮아진 가운데, 특히 cPSA-EGDMA(5 g) 1.0 wt% 첨가한 모르타르는 무첨가 시멘트 모르타르(20.1%)보다 porosity가 16.5%로 가장 낮게 나타났다.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.127-132
• /
• 2012

In this study, ambient temperature curing artificial aggregate were developed by using crushed-stone sludge. In order to evaluate the mechanical properties, the artificial aggregate was tested on 7 items. Test results showed that the artificial aggregate mostly satisfied the basic requirements of normal aggregate. The concrete with the artificial aggregate made by weathered rock and granite sludge was tested on the compressive test and flexural test. From the test results, It is confirmed that the concrete with the granite artificial aggregate develope the higher compressive strength than the crushed rock aggregate and the concrete with artificial aggregate concrete have the lower elastic modulus and flexural strength than the concrete with crushed rock aggregate.

• 대한토목학회논문집
• /
• 제38권1호
• /
• pp.11-18
• /
• 2018

이 연구에서는 폴리칼본산계 고성능감수제의 사용량을 1.2%에서 3.0%까지 변화시켰을 때, UHPFRC의 유동성 및 유변특성의 변화, 그리고 강도 변화를 실험을 통해 살펴보았다. 실험결과에 따르면, UHPFRC에서 고성능감수제 사용량 1.8%까지는 사용량 증가에 따라 유동성 개선 효과가 나타났지만, 그 이상에서는 유동성 및 유변특성 개선에 효과가 거의 없는 것으로 나타났다. 고성능감수제 사용량에 따른 압축강도 결과에서는 고성능감수제를 1.8% 사용하였을 때는 1.2% 사용했을 때 비해 고성능감수제 사용량 증가로 인해 강도가 약간 증가하지만, 그 이상의 고성능감수제 사용량에서는 사용량 증가에 따라 강도가 크게 감소하는 경향을 확인할 수 있다. UHPFRC 휨인장강도의 결과도 압축강도와 유사한 증감의 경향을 나타내었다. 휨인장강도와 연관성이 있는 압축강도 및 섬유의 분포특성의 영향을 분리하여 분석한 결과, 많은 양의 고성능감수제를 사용했을 때 압축강도의 영향 이외에 섬유의 분포특성의 영향을 받았음을 확인할 수 있었다. 또한 이러한 영향은 플로우 또는 유변특성 결과와 매우 밀접한 연관성이 있는 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제78권2호
• /
• pp.199-207
• /
• 2021

In the present paper, an analytical model is proposed to determine the flexural and shear strength of normal and high-strength reinforced concrete beams with longitudinal bars, in the presence of transverse stirrups. The model is based on evaluation of the resistance contribution due to beam and arch actions including interaction with stirrups. For the resistance contribution of the main bars in tension the residual bond adherence of steel bars, including the effect of stirrups and the crack spacing of R.C. beams, is considered. The compressive strength of the compressed arch is also verified by taking into account the biaxial state of stresses. The model was verified on the basis of experimental data available in the literature and it is able to include the following variables in the resistance provision: - geometrical percentage of steel bars; - depth-to-shear span ratio; - resistance of materials; - crack spacing; - tensile stress in main bars; - residual bond resistance including the presence of stirrups;- size effects. Finally, some of the more recent analytical expressions able to predict shear and flexural resistance of concrete beams are mentioned and a comparison is made with experimental data.

• 한국농공학회논문집
• /
• 제55권1호
• /
• pp.1-8
• /
• 2013

This study will not only prove experimental dynamic properties which are classified to slump, compressive strength, tensile strength, flexure strength and toughness granite soil concrete with a fine aggregate of granite soil and blast-furnace cement and polypropylene fiber over 45 mm, but also establish a basic data in order to use environment-friendly pavement through prove useful pavement mixed with granite and polypropylene (PP) fiber which is a kind of material to prevent a dry shrinkage clack, a partial destruction and useful and light. The value of slump test was gradually increased by PP fiber volume 3 $kgf/m^3$, but compressive strength took a sudden turn for the worse from 5 $kgf/m^3$. The compressive strength indicated a range of 13.72~18.35 MPa. On the contrary to compressive strength, the tensile strength showed to decrease with rising PP fiber volume, and the tensile strength indicated a range of 1.43~1.64 MPa. The tensile strength was stronger about 2~15 % in case of mixing with PP fiber volume than normal concrete. The flexural strength indicated a range of 2.76~3.41 MPa. The flexural strength was stronger about 20 % in case of PP fiber volume 0 $kg/m^3$ than PP fiber volume 9 $kg/m^3$. The toughness indicated a range of 0~25.46 $N{\cdot}mm$ and increased proportionally with PP fiber volume. The toughness was stronger about 8.3 times in case of PP fiber volume 9 $kg/m^3$ than PP fiber volume 1 $kg/m^3$. The pavement with PP fiber volume over such a fixed quantity in the park roads and walkways can have a effect to prevent not only resistance against clack but also rip off failures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.77-86
• /
• 2002

In this study we intended to investigate properties of cement mortar with recycled PET fiber, PE fiber, and PP fiber such as slump flow, compressive strength, tensile strength, and flexural strength. As results of experiment, several properties of specimen with recycled PET fiber were little low comparing those of specimen with PE fiber and PP fiber. But if we see from point of economy and recycle of industrial wastes, it has enough reason to be used. Compressive strength of specimen with recycled PET fiber at 56 days was about 10% higher, but tensile strength and flexural strength were lower than that of no-fiber.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.311-318
• /
• 2017

This paper investigates the utilization of waste tyre crumb rubber as the fine aggregate in precast concrete Paving block (PCPB). PCPB's are generally preferred for city roads, pedestrian crosswalk, parking lots and bus terminals. The main aim of this paper is to evaluate the mechanical properties of wet cast PCPB containing waste tyre crumb rubber. The mechanical properties were investigated using a density, compressive strength, split tensile strength and flexural strength tests at 7, 28 56 days according to the IS 15688:2006 and EN1338. The wet cast method was followed for producing PCPB samples. The fine aggregate (river sand) was replaced with waste tyre crumb in percentage of 5%, 10%, 15%, 20% and 25% by volume. All the test results were compared with the conventional PCPB (Without rubber). The test results indicate its feasibility for incorporating waste tyre crumb rubber in the production of PCPB by the wet cast method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.571-574
• /
• 2005

This study investigated the strength of concrete to improve construction material with polymer cement mortar. Some mixtures composed of Styrene-Butadiene Rubber(SBR) and Ethylene Vinyl Acetate(EVA) Poly Vinyl Alcohol(PVA) were studied. The three mixtures carried out the physical, mechanical test to determine its properties which a include : compressive, flexural, bond strength test. The test results show that the compressive strength was increased at long-term age when compared to early ages for increasing polymer contents. It was found that flexural strength and bond strength became larger as polymer to cement ratio became higher.